Old video material, but still all these HPI video's are one of the best instructional video's ever.
@stanworth88
11 жыл бұрын
I have a 29cc Baja 5T and it's pretty fast with the right tuning, i have an 8000RPM clutch, 20 tooth pinion and 57 tooth spur with a tuned pipe and it drifts around fine, jumps fine, and it fast, i had to change the breaks because of the speed of them little things, i put hydraulic front brakes on to help it stop better, the amount of perfomance mods out there for these type of cars is unreal, i'll be getting a stuffed +2mm stroker crank bigger fuel lines, polished carb and ported head soon
@eduardoj.hudson1238
Жыл бұрын
Good but you should have a 54t spur gear with that pinion, oterwise it won't fit or you make a mistake here at describe it
@Barthoization
12 жыл бұрын
its a 2-stroke , so for the first time, warm it up gently by driving it, max half throttle. Let it cool down fully, repeat the previous again. After warming it up for the 3d time its ready to rip. Break-in = setting the piston-rings to the cylinder. Idling the engine for 6 tanks is just a waste of fuel and time. ( not to mention carbon-buildup on the piston by not reaching optimum heat)
@cyberripper475
6 жыл бұрын
I wish they would return the old version of the baja with the purple parts and nice orange body cover
@tolgahancakir1571
2 ай бұрын
Hpi did a great job building a beast🎉
@stanworth88
11 жыл бұрын
Check your front wheel alignment make sure both wheels point streight ahead, you can alter the tracking by turning the track rod ends, they are the metal bars by the A arms with the flat spots on them so you can turn them with a wrench, also you might want to check the toe in angle on the back wheels, if one toes in more than the other it can cause it to pull to one side, you can also try turning the rear hub spacers 180 degrees to make the rear wheels streight.
@SteveMagr
4 жыл бұрын
15:00 pull-start disassembly and clean. Excellent.
@fatkhetburnell
8 жыл бұрын
This looks like an educational video filmed in the 70s. WTF HPI.
@fortruthnoterror7796
6 жыл бұрын
LifeInRecoil I was 6 when that video was released now nearly 20 (intro)
@bradleypendleton202
6 жыл бұрын
ForTruth NotError if u where 6 you would be like 15 now not 20
@silverjc4521
5 жыл бұрын
Lol
@bajamike3803
6 жыл бұрын
I miss the hpi purple
@AB-80X
5 жыл бұрын
Orange was better.
@eliejsukkar2211
11 жыл бұрын
lol i remember 7 years ago when i got one of these, they were a lawn shredder to the grass in the park, just ordered the 5sc ss today, these are great ;)
@MyForsake
12 жыл бұрын
very informative. can't afford it anyway xD
@AlexRcHandyman
26 күн бұрын
Ive still got one of these brand new in the box !
@mike85sx
13 жыл бұрын
so basically the rule is 1 battery per tank until u recharge it .....great vid cheers
@Hpj007
12 жыл бұрын
the break in for the fulie engine that ive been told is run it easy for 1 tank then run it as you want is from some of the most well know modifiers for baja's that i know. idiling for 6 tanks is just a waste of fuel. also the 2 strokes for bicycles maybe a bit different too. like for nitro engines each manufacture has a different break in process for their engine. like hpi they have the ebst break in for their motor each company will be different from the last dealing with the break in proces
@FishKeepingManiac
11 жыл бұрын
yes usually 92 octane and 2 stroke oil, with a mixture of 20:1 or 25 :1
@TheMickeyV
13 жыл бұрын
@littleboblives the air filter is for the keep some durt out to make sore that there is noting going in to the engine onlye air
@AndysRC08
10 жыл бұрын
I wish I have one of those and I like the sound of a 23 cc 2 stroke engine and 32 cc and a 35 cc engine
@eathynpatrick1601
4 жыл бұрын
Need help?? Got a Baja 5 b it has a rattle in the engine when I pull the cord. And goes through spark plugs like nothing?
@addyrcshorts
Жыл бұрын
How to keep the idle needle in factory settings
@SteveMagr
4 жыл бұрын
18:50 carby settings - great!
@hammerhome7879
6 жыл бұрын
I cant believe HPI has stuck with that long wheel base for so long , I chopped 1" off my chassis and it no longer nose dives or loops out easily . Its not that the front end is too heavy , its that the weight is leveraged to far forward.. OHH and about 1" wider....Are you listening HPI?
@SnookTuned
6 жыл бұрын
The wheel base is distance between the wheels...
@abdulnezha5429
5 жыл бұрын
Really a Great video mate! Thank You
@1091jordan
12 жыл бұрын
Yes actually i do know about 2-stroke engines. A stuffer crank can improve performance and strengh, but yes, it will not increese the top speed. If you run a stock clutch, it is more likely to slip inside the clutch bell, if you run a 4 shoe race clutch, then it is not likely to slip, therefore you will get better speed.
@bradleymilton9372
7 ай бұрын
Don't lie
@BoardsProductions
12 жыл бұрын
THISS i got it and its the best choice you can make
@BajamanCam
12 жыл бұрын
Std. or upgraded clutch, both will stopp slipping between the 10-12k mark. Aftermarket clutch such as lauterbacher clutch will only improve smooth acceleration, not top speed.
@user-sv6qq8tp9x
9 жыл бұрын
95 is standard in UK I run my golf on 98 from shell
@AB-80X
5 жыл бұрын
And why are you saying that?
@1091jordan
12 жыл бұрын
i up-graded my stock 26cc engine to a 30.5cc. If you want more power and acceleration then this is a vital up-grade. Also, By any chace, if anyone has a Kingmotor Baja 5B, Then you should up-grade the engine and carby any way. I have a KM and my engine and carby were, well, Shit. slow acceleration and very little top end speed. Apperently if you try to tune a kingmotor carby, the carby wont hold that possition for long. So if you are happy with the engine, then upgrade the carby
@patricktrotter9125
Жыл бұрын
What make a fifth scale gas car wheel term when you crack it
@jeromejasper9111
2 жыл бұрын
Can I use a 7v battery in my exeed hannibal 5th scale gas truck ? For the receiver and servos? Ty
@charlesmcgehee3227
4 жыл бұрын
Hi. I am looking for a replacement engine for my HPI RS4 EVO3 RTR. HPI PART # 15107 They are discontinued but doesn't someone have these engines? I would appreciate some direction. I bought it and it was supposed to be new. It came in a sealed box and was brand new stock. The engine blew. Not sure what happened. Needs a piton, sleeve and drive shaft. Too much money and parts not available. Anyone reading this with an idea for me let me know. I don't want to fit another engine in. Don't have the parts or the time.
@eternalrevolt7466
5 жыл бұрын
After 10 mins of running... The engine stopped and now my pull start won't pull. I was running it in wet conditions. Did I maybe get dirt/mud inside... Idk
@decimocentauro3764
5 жыл бұрын
So no specific break-in ? Like running idle for 15 mins, then let it cool down for 15 mins and repeat every time with 1/4 throttle more ?
@dominoespizza1756
4 жыл бұрын
this video demonstrates everything owners don't do
@littleboblives
14 жыл бұрын
what does the air filter oil do? if you are going to take apart the pull start make sure you hold the parts in as the spring inside likes to shoot all the parts out and unwind itself making it really hard to put back together
@rcfunrc2112
11 жыл бұрын
Cool i love baja
@natcoyle-palmer8753
4 жыл бұрын
Hi mine is getting delivered in a min so do I change shock fluid or do I leave it for a few weeks
@CenaSitnica
8 жыл бұрын
Guess this is a video for people who never had to run a 2/4 stroke gas engine, sounds a bit funny. lol
@Ldotbruv565
8 жыл бұрын
How is it funny??
@GGobblin
9 жыл бұрын
Sunaco Ultra is like 94 octane. One if the highest grades. 89 is more like a standard octane
@FgFg-zh5lf
9 жыл бұрын
can same one guide me how many turn i need to do for the carburetor adjusting ?( its very fast in the video ) thanks
@deonstrydom5176
4 жыл бұрын
Some one messed with my remote/pushed buttons now my remote does not read my car...please help?
@BarraGutheWorld
4 жыл бұрын
Re bind the remote and receiver
@mohamedsherif5791
3 жыл бұрын
what is the use of air filter oil? and what will happen if i didnt put air filter oil?
@genericgoogleaccount8907
3 жыл бұрын
It stops dirt from getting into your engine. If you don't put it on then you'll get dirt in your engine and the dirt will scratch the engine's walls leading to lack of performance and eventually complete engine failure.
@SUPERFORMIAN
12 жыл бұрын
The engine in a car may not be a small engine, but it still must be broken-in. So do the 2-stroke gas engines for bicycles they have in California. Those must be broken-in.
@javiergil8228
9 жыл бұрын
So never leve gas in the tank damm I do that I didn't know that does anyone know we're I can get a muffler a good one
@1091jordan
12 жыл бұрын
The fist day i got my Baja 5B, i reved the shit out of it. Didn't bother with the break-in process. I personally don't believe in it. It performs excelent, up to 110km/h and uses a tank of fuel in about 40 minutes. but i have a 30.5cc engine. Not the stock 23cc or 26cc depending on which kit you bought.
@ashd002
11 жыл бұрын
Just to say mate you don't need to use a comma if you use the work ( and ) they serve the same purpose :)
@willvanallsburg4703
7 жыл бұрын
Jesus Christ man you want me to use race fuel???????!!!!!!!!! there is no regular 95 octane all we have is 92 and 115
@abdulnezha5429
5 жыл бұрын
😆
@Winter1256
3 жыл бұрын
In Europe we do have 95 and 98 only
@SafwaniTube
11 жыл бұрын
recently, I got 5b ss. but i can't make it go in straigh line . why is that ?
@TheDeepImpact965
13 жыл бұрын
No break in procedure with gasoline engines?
@ellawoodmansey
7 ай бұрын
Whats the name of the charger as i seem to have misplaced mine :D
@OfficialHPI
7 ай бұрын
I'd recommend this charger from our current range for the receiver pack: www.hpiracing.com/en/part/118051
@MultiSniper70
12 жыл бұрын
you can buy a 30.5cc engine and a tuned pipe i want a performance upgrade on a lozi 5t 4wd
@SUPERFORMIAN
12 жыл бұрын
However, idling it for 6 tanks of fuel wouldn't hurt. However, I find it strange. The 2-stroke engines for bicycles require a break-in process. The Fuelie engines and others alike aren't much different. Why does the Fuelie get excused from the break-in process?
@TheMickeyV
14 жыл бұрын
@leeadamaa dude standard 95 and 98. is 89 en 92 in the eu
@crazyforcrcars
13 жыл бұрын
they should make a 30.5cc baja with 4wd
@willvanallsburg4703
7 жыл бұрын
can you fit a obr 30.5cc engine in this car?
@johnboymcdan6786
7 жыл бұрын
Seemingly Suprized yes you can bud
@willvanallsburg4703
7 жыл бұрын
cool
@khaledmaher6602
3 жыл бұрын
you can fit 45cc engines too
@claudekim7876
11 жыл бұрын
I think he forgot to loctite
@bombakdik
11 жыл бұрын
Seems like the engine isn't too good in the low revs?
@nicholasspears8052
6 жыл бұрын
"There is no danger of over priming the engine" is HORRIBLY wrong!!! You can easy flood an engine by over priming. other than that this video is spot on. But that comment is waaaayyy wrong, don't over prime ever. Over priming will foul plug and cause huge headaches!!!
@BajamanCam
12 жыл бұрын
Do you know anything about 2 stroke engines? A 4 shoe clutch does not improve high rpm, and a stuffer crank actually decreases top speed. I don't believe 85kph, put a gps on it or use a radar gun, and you'll get no more than 70kph... If you're running stock gearing that is. Obviously top speed does depend on track/road surface and tire choice as some have a different diameter, so don't point out the obvious mate. Good luck getting 110kph...
@savagefluxe
11 жыл бұрын
cool
@zamiercarmichael7405
8 жыл бұрын
does it have a ideal
@jakelettera4443
9 жыл бұрын
anyone watching in 2015
@WillBilly.
8 жыл бұрын
nope 2016 but i have watched this in 2015
@radmund17
7 жыл бұрын
Will Brewer I have to
@nanithefuck
7 жыл бұрын
2017 tho
@hallobyebye699
5 жыл бұрын
2019🤦🏾♂️
@MultiSniper70
12 жыл бұрын
mate 91% octane can be used on high compresion engine like the 30.5cc engine which need a different oil mix ratio 32.1 mix any thing under 91% octane will screw a expensive engine so use 91% or 95% thats if you can get it becasue our gas staions in the uk have 91% and thay have 97% octane in other places but my nearest sells 91% octane which is plenty for what i need for a 30.5cc engine upgrade for a lozi 5t
@sreelalroy_v
6 жыл бұрын
Where do I get hpi Baja RC in India... Please reply
@hallobyebye699
5 жыл бұрын
sreelal roy aliexpress. And here is a tip. Get a killswitch... and a better battery 3000 to 4600 mah is good!!!!. And!! Upgrade the steering servo.... jx 2060 is a good one and is pretty good for the money. And for gas!!! 40ml oil for 1L of fuel. And buy a good transmitter... i have a spektrum DX4C but there are cheaper ones. If you get these things my friend you are set!!! And!!!!! Better battery charger the IMAX B6 mini is prefect. Not the fake one butt the real one!! Check on youtube how to spot a real and a fake one. Have fun my friend!!!!!
@GriffXJ
11 жыл бұрын
What about 87 octane? That's standard in my area (87, 89, 93)
@watuhenk7398
8 жыл бұрын
where can I buy baja 5b ss?
@ayansheikh1744
11 жыл бұрын
can we use the fuel from petrol station or we should make it plzz help
@MrGooseG
8 жыл бұрын
Yeah nah yeab nah
@28minecraft
11 жыл бұрын
They run on petrol (gas) and that 2 stroke oil!
@johnboymcdan6786
8 жыл бұрын
Can it make a cup of tea?
@kreizmann2943
7 жыл бұрын
and some biscets?
@kreizmann2943
7 жыл бұрын
typical british xD
@johnboymcdan6786
7 жыл бұрын
Nice BAjA :0)
@Jaketunnell
6 жыл бұрын
Krispy I'm British
@hallobyebye699
5 жыл бұрын
Can it go to the shop for some krisps
@josezenteno4231
2 жыл бұрын
Dónde se consiguen?
@09166226xx
12 жыл бұрын
i am living in VietNam,so can you ship it for me???
@deletingsoonbye
10 жыл бұрын
95 octane? Nigga dis ain't a race track. Supreme is only 92/93 depending where ya go
@puella_meiberu
10 жыл бұрын
Where I live, 95 is everywhere.
@reinier7865
9 жыл бұрын
race fuel is 102 to 105 octane 95 is standard pump fuel
@flattabang
7 жыл бұрын
Well.. here 98 octane is kinda standard. :)
@12th.jahlil
10 жыл бұрын
Hey can you guys do a breaking in video
@tylarfoster3601
9 жыл бұрын
It's not hard to break it,in, just drive it around slowly and use a full tank and then it's all good
@12th.jahlil
9 жыл бұрын
Tylar Foster now i know that. but im not getting an hpi product
@KL33CHRY
5 жыл бұрын
Does it have a reverse gear ?
@TJ-ux6ng
5 жыл бұрын
Joseph Geoji no only forward and brake
@GGobblin
9 жыл бұрын
Standard octane is not 95 ! That is among the highest.... Let's be accurate...
@arttupiira9282
9 жыл бұрын
+GGobblin It is in Europe
@gpaje
7 жыл бұрын
95 Octane RON, it similar to 91 Octane US rating system.
@AB-80X
5 жыл бұрын
It's 95 RON, not 95 AKI.
@nitrorcfreak100
12 жыл бұрын
That car looks bad ass fuck where did you buy that. I liked and I loved all of your videos so I had to subscribe. SONG??????????????/
@Sloppyjoe96
11 жыл бұрын
what would happen if i ran the same gas from my weedeater in it?
@leeadamaa
14 жыл бұрын
standard 95 to 98?!!?!?!?!? i only get 89-92 octane content???
@PommyDownUnder98
11 жыл бұрын
its the same stuff. im not sure about the ratio mix you use but the engine is basically the same thing.
@MrTRISTANCOOL
12 жыл бұрын
do i need to break it in?
@hallobyebye699
5 жыл бұрын
Juppp
@SUPERFORMIAN
12 жыл бұрын
Seems like they totally disregarded the break-in process. A fat birdie told me to break-in a Baja's gas engine, let it idle for 6 tanks. That's what I call time consuming.
@BajamanCam
12 жыл бұрын
110kph? Yeah sure... Unless you are running different gearing or a 2 speed. A standard baja will go no more the 60-70kph.
@eathynpatrick1601
4 жыл бұрын
Is hard to put a 2 speed on them bro?
@bombakdik
11 жыл бұрын
Why Fuelie and not Zenoah?
@hallobyebye699
5 жыл бұрын
Saving money
@Imperial_Wing
4 жыл бұрын
Put the car in the ground with the ra-radio turned on
@HOOD-FM
2 жыл бұрын
تصدقون ي اعيال ان السياره الي ف المقطع معي
@ibraheemalawnih7304
Жыл бұрын
بتعرف فيهم ؟؟؟ .... انا من جديد شريت سيارة 29cc والبوجي يضل ينحرق .... في سبب معين لينحرق ؟؟؟
@kuwarchabba7624
3 жыл бұрын
He said back and forward it doesn’t even go back 9:25
@Hpj007
12 жыл бұрын
there really isnt a break in rocess. and its not idiling 6 tanks of fuel. for the first tank you run it less then 3/4 throttle and very the entire tank. after that just run it like ya stole it.
@x-flight1015
9 жыл бұрын
100th comment!
@Benny__4x4
12 жыл бұрын
Baja.
@unknownguy1123
9 жыл бұрын
Is the hpi stock radio reliable???
@quin1150
7 жыл бұрын
JRC i've had a runaway with it, so I don't use it anymore.
@HaloofBlood1
10 жыл бұрын
receiver pack lasts for 15 mins and loads for 6 hours lol
@tarikparis11
9 жыл бұрын
no , 1h
@ethanmarsingill
9 жыл бұрын
no 55 min
@gbh7749
9 жыл бұрын
+tarikتث paris 1كدسسبظبللدج
@DashzRight
8 жыл бұрын
+dickvancock1 I also was like wtf, one gas tank of about 700ml and a "supposed" 2000mah battery last for 15 minutes powering 2 servos? But I also think he said FIFTY and not fifTEEEEEEEN
@puffmonster689
11 жыл бұрын
go with the setting they say 25:1 50:1 will hurt it
@marclupian7544
7 жыл бұрын
1/5 rc car large scale
@MARTINLARSENF0X
11 жыл бұрын
if your unhappy with the speed. you can buy 62 cc engine, instead 26cc that comes with it. deal with it nooby.
@Story-Taller-T
10 жыл бұрын
US $619.99
@bradleymilton9372
7 ай бұрын
Hahaha this is ancient
@TeaBagger5000
11 жыл бұрын
They seem so boggy and kind of gutless.
@Redrocket2012
12 жыл бұрын
those engines are generally broken in in the factory. but hpi is lazy and doesnt do it for you
@matteedstrom
9 жыл бұрын
WRONG!! There is one danger issue with over priming the engine, and that is if the intake of the cylinder is open and you prime it full then pull the cord. Most unlikely to happen but it can. Then you can actually bend the piston shaft! If unlucky.
@SnookTuned
6 жыл бұрын
WRONG!
@MARTINLARSENF0X
11 жыл бұрын
i looked it up, and i hate it. its ugly and uncool.
@1091jordan
12 жыл бұрын
I never said it definitely goes 110km/h, i said i could go up to 110km/h. Im running a stuffer crank and a lauterbacher 4 shoe racing clutch. My engine would maybe reach 85km/h but i have never cheked the actual performance of it. It also depends on what tyres your running and what conditions your running the baja on. If you use slicks and your on dry road then you willget a higher speed than if you were using dirt buster on grass or dirt. So when did you learn to troll fuck flaps
@blueharibo1
11 жыл бұрын
What put a geek on it? And a boring as hell voice commentator?
Пікірлер: 153