It's awesome! Well done. Just got a HSP Fury, very exited.
@petergoodwin2465
5 жыл бұрын
Very in formative, thinking of buying one of these , parts and upgrades are everywhere in Australia. Very cheap as well, will be watching this video a few times for sure . You've done a great job on this HSP.
@birminghamgtrc
5 жыл бұрын
Nice nice. You should mate their well worth it and as you see I did almost every Upgrades to it. Ok it cost me say 2times the cost of car but it look so cool and drive well. But yh do check out my other video on HSP I try to give as much info on does and don'ts
@petergoodwin2465
5 жыл бұрын
@@birminghamgtrc I will buy one for sure after learning from your videos. Great channel, I can't believe how fast they go. When we were kids they did 15 kmh. The planes are all electric now , got plenty of batteries. I'll get one from eBay , $158 , bargain, then I'll upgrade it. Thanks for the great information mate . These are great value and I have a massive park out the back . Need to watch all your videos. Thanks mate .
@collisswaby8773
5 жыл бұрын
Just done a 3s brushless on my XTR.. ur an inspiration matey, will be upgrading all my parts very soon 😊
@birminghamgtrc
5 жыл бұрын
Cheers bruv much appreciated sry for late reply I just saw this but let me know how you got on you gonna upload a vid of it 👌🏾😉
@Flame6332
5 жыл бұрын
Almost done with my binge watch of all your videos on this fantastic little buggy, really inspired me man to get back out there and tune up my old buggy that I got 7 years ago, I never imagined you could push it this far! My main concern with going any further than 2S high discharge was that I didn't think the drive train could manage it!
@catcancrunch7260
3 жыл бұрын
Nice review mate
@RCHobbyShed
5 жыл бұрын
Awesome buggy. Great work! 👌😎 Subbed!
@birminghamgtrc
5 жыл бұрын
Respect 👊🏾
@CmwSpeedrunUk
4 жыл бұрын
Think I’m going to buy one of these great modifications , looks proper
@birminghamgtrc
4 жыл бұрын
thanks bruv. yes defo a nice little buggy for the money and parts are cheap and loads to choose from in different colours.
@CmwSpeedrunUk
4 жыл бұрын
Birmingham GT RC iv had a few tamiyas in the past , I think this is going to be the new toy , yours is bang on , I like the fact you have upgraded everything POSs lovely blue , Might have to pic your brains soon , keep doing what your doing great videos and rc 😎👌🏽
@birminghamgtrc
4 жыл бұрын
@@CmwSpeedrunUk yes sure just ask bruv if i can help i will no problem. but you'll find a lot of tips on my older video on this buggy. but i still need to find stronger dog bones as they will bend on 3 s or 4s if you push to hard as there thin but on speed runs their fine just when your pulling of hard a lot the bend or like tweets.
@CmwSpeedrunUk
4 жыл бұрын
Birmingham GT RC will defo be watch all your videos , your car / buggy mate is outstanding the hole job is 👌🏽👌🏽👌🏽👌🏽👌🏽, if I buy one straight out the box where do u purchase upgrades .
@ady110fv
3 жыл бұрын
Very nice been on the nitro path but fancy something like that well done nice job
@birminghamgtrc
3 жыл бұрын
Respect 💯👊🏽
@TonysRcTechboom
5 жыл бұрын
First 😜 very nice chassis with the CF look, great upgrades its looks Sick, too good to drive lol 😜 video bro, if am honest think it looks good with the black arms because it sets off the other colours other the details will be lost but that's only my opinion bro, fantastic video again Brother 👍😍👍
@birminghamgtrc
5 жыл бұрын
cheers mate. yh i do like the black arm but im thinking why stop their lol might aswell go all in lol
@doboldobrax1418
3 жыл бұрын
Nice tyres
@Flame6332
5 жыл бұрын
Hey man, one more thing I think you could do is purchase the upgraded high down-force wing or try 3D printing a custom designed one! In my opinion, I would want to showcase all of the work you've done with a transparent body! You don't have to completely redo the air-cups, just make some cut outs here and there!
@bennysandow207
Жыл бұрын
cracking job mate, only thing could be a high performance spoiler!
@antoinejohnson2799
3 жыл бұрын
Nice ride
@birminghamgtrc
3 жыл бұрын
Respect bruv 💯👊🏽
@delschier1419
3 жыл бұрын
I am in the process of upgrading everything with blue metal CNC parts. I didn't want to use the new blue metal adjustable linkage rods but made a tool to press the silver metal insert holding the ball in further, that fixed the play in them. I haven't yet figured out how to put the tie rod under the idler arms or make the servo saver work. I see you have the tie rod underneath so it clears the transfer drive. I haven't figured that out either. Spent the whole day on it and still working on the front. I would have been nice if there were some instructions, even Chinglish ones :)
@birminghamgtrc
3 жыл бұрын
So sorry for late reply was on an unexpected break but yeah leave link stock that good.
@Keukhc90
Жыл бұрын
Hey man what kind of adapter did you use to put 1/8 tires on a 12mm hexagon nut. Normally they ar 17mm right? Im thinking about bigger tires to but stil thinking how to do it.
@antoinejohnson2799
3 жыл бұрын
Cool
@tkullberg2776
2 жыл бұрын
Wanna put up a list of whats you have under the hood? I have a 3300kv motor but damn its slow..
@rcflashcars
3 жыл бұрын
cool!
@birminghamgtrc
3 жыл бұрын
Respect 💯👊🏽
@davidguille5992
4 жыл бұрын
Dude could u list the upgrades and tell where u bought them from please, I've just got the same buggy and want to hop it up as much as I can. Cheers David
@delschier1419
3 жыл бұрын
I got a set with more than this guy has except for the differential cases from Alibaba for $70.
@camrowdrone6497
5 жыл бұрын
Love your car,add a go pro👍🏻
@birminghamgtrc
5 жыл бұрын
Cheers bruv. Might do if I get my hands on one. But for now I'll have to settle with shooting from my phone mounted on controller. But weather is bad right now need to wait till it warm up as it to cold.
@camrowdrone6497
5 жыл бұрын
Birmingham GT RC go pro on your car👍🏻
@tanglfc
4 жыл бұрын
Hello mate. Been watching your upgrade videos of your HSP XSTR. It looks brilliant! I've recently just bought the Pro brushless version, but I'm quite new to it all. Where do you buy your upgraded parts from ? Do you just search for hsp upgraded parts ? 🙈😂 Cheers mate
@birminghamgtrc
4 жыл бұрын
Cheers bruv yes just search hsp xstr parts on Ebay their loads and good choices of colors 👌🏾
@tanglfc
4 жыл бұрын
@@birminghamgtrc great stuff, thanks mate 👍
@traxxas13spiros
5 жыл бұрын
Hey..that's nice!I want some information!can you give me a link for the shafts and the wheels and tires?
@birminghamgtrc
5 жыл бұрын
Thanks 👌🏾 Ebay mate their loads for hsp. Look for universal dog bones and the shaft came standard fitted when I brought buggy but check in your user manual for part numbers and you should find loads on Ebay.
@hankyspanky724
2 жыл бұрын
Hey mate, what sort of shock ball stud did you use?
@birminghamgtrc
2 жыл бұрын
Are that a good question I will have to check but I think I did find change them I need to check and see if I can help you if you have found out now as I was a way a while 🙏🏽
@ibbyb21
3 ай бұрын
Yo I got rc car like this bro I want to upgrade it any recommendations I seen ur other video the cars fast for little kid bro
@jordifontcrawler2822
3 жыл бұрын
Hello were you get the stability bars?
@birminghamgtrc
3 жыл бұрын
The sway bars are from 1/8 hsp they fit straight in
@antoinejohnson2799
3 жыл бұрын
Were u get the sway bars
@birminghamgtrc
3 жыл бұрын
I cant remember were as it was so long ago but it was sway bar from different rc
@CmwSpeedrunUk
4 жыл бұрын
Hi mate , just looking at hsp ,where do u source your up grades from , Thanks
@birminghamgtrc
4 жыл бұрын
Hey. Yeah I get them all from Ebay
@CmwSpeedrunUk
4 жыл бұрын
👌🏽
@kiddykidd13
3 жыл бұрын
Hi mate what pin do you use for front arm to connect with front bumper
@birminghamgtrc
3 жыл бұрын
Stock pin bruv
@kiddykidd13
3 жыл бұрын
Birmingham GT RC link I can’t find
@birminghamgtrc
3 жыл бұрын
@@kiddykidd13 yes their very hard to find bruv. Don't know why but can be easy to make if you buy same thickness steel rod and cut to size.
@scarfacerivera7867
3 жыл бұрын
What is the name of them tires ?
@birminghamgtrc
3 жыл бұрын
Gt sweep 1/8 Road tyres belted from wheelspinmodels.co.uk
@jonnylaris
4 жыл бұрын
Hey mate what's the benefit of bigger wheels?
@birminghamgtrc
4 жыл бұрын
Better handling and more speed and I like the look but mostly as well they make better road tyres in 1/8 scale wheel their belted wheel for over 100mph.
@jonnylaris
4 жыл бұрын
@@birminghamgtrc thanks for the quick reply. Should I glue the wheels or just keep them with the foam inserts? Also if you had a link to the ones you have that would be great. I can't seem to find the exact ones on eBay.
@birminghamgtrc
4 жыл бұрын
@@jonnylaris always leave foam in tyres and always make sure their glued. I got mine from Ebay or wheelspin model or model sport
@RcAction
5 жыл бұрын
Batterie how much mAH ?
@birminghamgtrc
5 жыл бұрын
100c
@RcAction
5 жыл бұрын
@@birminghamgtrc thank's 👍
@MrAllancord
5 жыл бұрын
where did you buy the sway bar?
@birminghamgtrc
5 жыл бұрын
ebay but i had to buy sway bar for 1/8 and i had to cut the end of the rear as was to long i cut abut 10mm off each end but when i got the front it dont fit so swap front to back and it fit prefect. i talk about it in my earlier vid if you check back. but ebay mate.
@deltaforce6086
5 жыл бұрын
Hi bro, size of the wheels?
@deltaforce6086
5 жыл бұрын
Size of wheels ?
@birminghamgtrc
5 жыл бұрын
1/8 100m bruv.
@birminghamgtrc
5 жыл бұрын
17mm hex
@deltaforce6086
5 жыл бұрын
@@birminghamgtrc oh i understand but i have hex 12mm
@birminghamgtrc
5 жыл бұрын
@@deltaforce6086 you need 17mm hex adapter to change size from 12mm hex up to 17mm hex. Adapter are very cheap on Ebay.
@ferniclestix
Жыл бұрын
Ahh so jelly jut got a fresh HSP meself and man she is crying for upgrades, especially the sloppy steering :P
@joepalmer8198
3 жыл бұрын
Mines faster ✌️
@birminghamgtrc
3 жыл бұрын
Nice nice I've not really gone for maximum speed as I was new to speed running back then and now it more a shelf queen as I upgraded so much and that never really helped Speen just look nice 👍🏾
Пікірлер: 77