Got my 25cal a week ago, Best purchase I’ve made!!! Hard to explain how much fun it is til you actually shoot one on these
@psycho6275
Жыл бұрын
Ive had my .22 around a month now and it is a fantastic gun. Been into pcp's for years now and this is by far the best pcp ive ever gotten. Its incredibly powerful for what it is , A semiautomatic pistol that can shoot a 18 gr pellet at around 1030fps turned up. To conserve air id suggest around 900 fps. Also its more accurate too. Over a 1000fps is too fast for a 18 grain pellet
@User-cv2xn
10 ай бұрын
Iv heard its actually more powerfull the 22 lr , is it true?
@psycho6275
10 ай бұрын
@User-cv2xn I'd say just as powerful in some applications but it is up there. The .22 I have is probably more powerful than a 22lr pistol with a short barrel. It's the most powerful air pistol I've ever shot
@milesstover3724
9 ай бұрын
@@User-cv2xn no , factory 22lr can be 170-190+ FPE at higher end of power , GK1 can do a little over 80FPE i think
@arcticairgunner
Жыл бұрын
This pistol is absolutely insane 👍👍👍
@devinpatterson2185
Жыл бұрын
That thing is sweet. Too bad i live in gay assed Canada.
@Boom.Strike
Жыл бұрын
Yes, i feel badly for all the countries that don't have freedom of the fun.
@eiriepyrie2206
Жыл бұрын
Aloha from Big Island Airgunners, that was truly an exciting video. Keep them coming 👍🏾👍🏾👍🏾
@starviptv6544
11 ай бұрын
1000-1200 FPS You can hear it ...
@williamehandyjr.4017
Жыл бұрын
Adding a moderator to my GK1has the point of impact completely off the target at 50 feet. I suspect it is due to the moderator moving the shroud or that the adaptor has to much play and gets shifted. Our red-dot sights are influenced by the shroud stability and positioning due to the way we mounted the optics. My adapter lacks the beveling (centering) that the Huben shroud retainer nut has. My adaptor is from Ares Airguns and is not a Huben built piece. Which adaptor are you using to mount your moderator?
@Boom.Strike
Жыл бұрын
Im using the Ares barrel adapter, not noticed any shifting but im also not using the shroud for my red dot mount, im on the receiver block . How big is the holes in your moderator? Maybe to tight. Is it 3d printed?
@royweatherford64
Жыл бұрын
@@Boom.Strikesame here only problem I’ve got is I can’t feed it fast enough
@toxicmatrix1337
8 ай бұрын
Are you clipping the moderator?
@albertgonzales5244
Жыл бұрын
Very nice!!
@FernandoDornelesdarosa
29 күн бұрын
Comom posso comprar uma e quanto custa
@johnnybbgunner2136
Жыл бұрын
Pricey but very nice.🤠🇺🇸
@豪帅帅
2 ай бұрын
How can we ensure that the firing wheel rotates every time GK1 is activated, instead of remaining stationary?
@Boom.Strike
2 ай бұрын
It should automatically rotate every shot, if not then your ammo is to loose in the magazine and hanging up on something as it tries to rotate. That's my guess.
@royweatherford64
Жыл бұрын
Good shooting
@jeremyhammond5173
11 ай бұрын
How long did it take you to receive your awesome pistol?
@Boom.Strike
11 ай бұрын
I got mine in the first run launch, but i did have it pre-ordered for like 7 or 8 months. Well worth the wait and money, nothing else like it out there.
@1269Dondude
11 ай бұрын
@@Boom.Strikemine is supposed to come in the next week or so. Can’t wait
@Loneokami
10 ай бұрын
@@1269Dondudehow long ago did you pre order?
@1269Dondude
10 ай бұрын
@@Loneokami like 2 months
@sammydewitt4498
10 ай бұрын
i neeeeeeeeed....i neeed..
@MTNPANTS
Жыл бұрын
Like music!
@Ereles00
Жыл бұрын
It's awesome man 👍
@goorant
Жыл бұрын
Whoa! Either you're a crackshot or that gun is unbelievable, or both! Sign me up. Where can u find a compressor to fill to 5000 psi though? = 400 bar?
@Boom.Strike
Жыл бұрын
Probably both, but the gun is super sweet to shoot. You definitely dont need to fill to 5000, i only fill to 3500 and that gets me one mag (17 shots)at 800 fps and a 4500 fill gets me 34 shots. The velocity actually goes up as the fill pressure goes lower, so filling to 5000 doesn't gain anything.
@PAPILLON1975
Жыл бұрын
What type of moderator and red dot are you using?
@Boom.Strike
Жыл бұрын
My own 3d printed mod. And a truglo tru tac micro reddot
@Relaxbadkneeadventures
Жыл бұрын
😉👍🇳🇱
@harleyhall4485
10 ай бұрын
What mount are you using for the red dot?
@Boom.Strike
10 ай бұрын
I have a video on here showing install and details in the description.
@harleyhall4485
10 ай бұрын
@@Boom.Strikeah, I see it now. Appreciate it.
@Boom.Strike
10 ай бұрын
@@harleyhall4485 happy to help, a red dot on this beast of a pistol is so nice to shoot.
@harleyhall4485
10 ай бұрын
@@Boom.Striketotally. This is the route I’m going to go. I like the placement and honesty the mount looks great
Пікірлер: 38