i want to try a piece of that barra swapped mustang with my new lt4 colorado! maybe we can have a repeat of the evo 5 vs r32?
@anthonyjunies8221
4 жыл бұрын
I was having that exact idea🔥
@traxxasslash95
4 жыл бұрын
The other 'rado couldn't even hook with 500hp though...
@octopuswithatrident
4 жыл бұрын
@@traxxasslash95 r32 vs evo 5 was a roll race. I believe they both need some some speed to avoid spinning with those setups.
@anthonyjunies8221
4 жыл бұрын
@@octopuswithatrident yup roll race,winner gets the content
@streetboyz1096
4 жыл бұрын
The gt350 will either gap your Colorado or run straight into you
@gureno19
4 жыл бұрын
"That sounds unlike anything I've ever heard" Oh my sweet sweet non Australian child.
@alecaagaard
4 жыл бұрын
Me: I like tools Adam : Here's my 50K tool setup
@nathanpini218
4 жыл бұрын
its legit like 200k lol 1 of those tiny sets cost $400
@BunkBoiBilly
4 жыл бұрын
@@nathanpini218 409 piece automotive master mechanic set is 9k so he got about 30k roughly lol
@illuminated6712
4 жыл бұрын
cammeron howard that’s the SENIOR mechanic set . So probably 15k for one .
@dieseldabz7104
4 жыл бұрын
@@BunkBoiBilly PLUS the toolbox man!
@ianredman376
4 жыл бұрын
@@illuminated6712 28k for one new senior set on amazon. so yeah.... 84k
@jaylee6936
4 жыл бұрын
Did they send you 200 10mm sockets? Also: I creamed
@jaylee6936
4 жыл бұрын
@Junior Bo2343 it's something adults do when they get excited by a smorgasburg of toolery
@dieseldabz7104
4 жыл бұрын
@@jaylee6936 or vagina..Whatever floats your boat..
@r7kelley553
4 жыл бұрын
You nassty!
@mat8009
4 жыл бұрын
I creamed aswell brother, that engine makes me moist
@jaylee6936
4 жыл бұрын
@@mat8009 right my god cant wait to see this thing flying down the strip
@AutomotiveAnatomy
4 жыл бұрын
All those tools but the 10mm will still not be found anywhere lol
@crimson8135
4 жыл бұрын
fax
@Matty.Hill_87
4 жыл бұрын
You know 🤣🤣
@adellisdevelopmen6593
4 жыл бұрын
Needs one of those toolboxes just for spare 10mms
@Josh_D03
4 жыл бұрын
Knock on wood I bought a Stanley tool set like 2 years ago and still have the 10mm lol longest I've ever had one.
@AutomotiveAnatomy
4 жыл бұрын
@@Josh_D03 haha i always loose them
@97MrFluffy
4 жыл бұрын
I can hear the Australian national anthem while your reving the Barra 🇦🇺🇦🇺🇦🇺
@oldblood_eyes
4 жыл бұрын
6:40 the barra mustang is easily the best sounding car you got. i can tell just by the revs alone. that things sounds rad
@shalakabooyaka1480
4 жыл бұрын
Idk, I still that the GT3 RS in sounds amazing
@_Bonez12
4 жыл бұрын
Hard disagree. Sounds like a twin cam John Deere.
@ddevil4980
4 жыл бұрын
I personally think the s15 sounds better or atleast as good.
@streetboyz1096
4 жыл бұрын
The voodoo engine before the fire and the gt3rs sound better
@davidjameswales
4 жыл бұрын
I wouldn't judge any engines recorded on a camera mic or even a shotgun mic that are as loud as that one even before compression and double transcoding. Recording loud cars is really fucking hard.
@vega_bomb8739
4 жыл бұрын
The barra is easily the best sounding engine I’ve heard. Really makes he wanna do a barra swap in the future
@Michael-jq5pf
4 жыл бұрын
Me too. Better than my RB. I haven't seen a single Barra motor anywhere or in any vehicle here in WA
@TheEndfieldgaming
4 жыл бұрын
it sounds 10x better in person trust me
@uhhrace
4 жыл бұрын
@@Michael-jq5pf lmao it's an Australian motor. Good luck finding one in Washington
@francispaz1567
4 жыл бұрын
You need a 5 cylinder engine in your life sir!
@hamster9135
4 жыл бұрын
A 5 cylinder is just a baby 10... they do sound great though! Howver, I loved that insane V10 that BMW put into their M5s.
@Guips96
4 жыл бұрын
It's great to hear you're gonna compete in Pro 1 this year man. I'll be cheering for you, dude! I saw the post on the FD twitter as soon as they posted, was pretty stoked tbh.
@joee4894
4 жыл бұрын
Its messed up to say but he's about to put FD on the map even more then it is. He brought so much attention to pro2 can only imagine pro1 all I can say is I'm glad our sport is growing and I can't wait for this season!
@Guips96
4 жыл бұрын
@@joee4894 Oh, for sure. He'll bring a whole lot a attention to FD this year. There's also a Brazilian driver, not even near as popular as Adam of course, but he'll bring a lot more attention too from us brazilians since he's pretty well known here among the drift fans. It's João Barion.
@alexflorea43
4 жыл бұрын
I can just imagine Alberto in two weeks: So I really like this ratchet, because the head is like long, and it goes tick, tick tick
@scottcol23
4 жыл бұрын
I totally read that in his voice and accent.
@sparkycooper6621
4 жыл бұрын
My dad used sk tools for 20 years and never let him down and I've used them my whole life. This made my day!!!
@Lisa4Me2
4 жыл бұрын
My dad too and that was over 50 years ago. Among the BEST pro-level mechanics tools you can buy.
@stylestealer
4 жыл бұрын
Adam turning his manual car to auto. The 12 year old car guys: 🤯🤯🤯🤯🤯
@heyitsdurancitooo5212
4 жыл бұрын
Lol
@streetboyz1096
4 жыл бұрын
“Car guys” The ones that somehow have millions of followers on IG that post “1000HP Supra vs 1000HP GTR” lmao
@simeonrf7047
4 жыл бұрын
Imagine if he left them all on the floor so that he never looses them
@Jxrd99
4 жыл бұрын
Bruh, them tools gotta be worth more than like 80% of this audiences cars
@raffighookassian1724
3 жыл бұрын
That's gonna be just shy of 100k in tools
@stephenmitchell3569
4 жыл бұрын
Wow brings back the 70's when S-K was Big Dog! Makes me feel fuzzy!!! Nice! Motor sounds like my built 64 XKE BIG 6?! RUMBLE+++++!
@k2svpete
4 жыл бұрын
As an Aussie I love seeing the enthusiasm you guys have for this project and I'm hanging to see it mobile.
@simeonrf7047
4 жыл бұрын
*Laughs in $100 tool set aha*
@tylergalikaev2142
4 жыл бұрын
That’s too real man
@remar-6
4 жыл бұрын
😂😂😂😂😂😂😂😂
@dieseldabz7104
4 жыл бұрын
I have wrenches that cost more than $100 each..
@ricoslidin9822
4 жыл бұрын
DieselDabz710 wow ur so cool dude
@wyfiswanson
4 жыл бұрын
you can build a car with a $100 harbor freight tool set. I've done it.
@GoldCoastComposites
4 жыл бұрын
I live in Australia. I currently have 13 Barra motors in my shed. And yes they do sound like a big balled 1.5jz or a bag full of angry drop bears used as a soccer ball.
@MahiasImdrup
4 жыл бұрын
ItsJustA6 Adam LZ Collab with SK Tools a sponsor :D
@z32mike
4 жыл бұрын
that’s what i was thinking!
@DonisGP
4 жыл бұрын
Dude I love itsjusta6. If they collabed it would be awesome
@jesserojas2576
4 жыл бұрын
Yee!
@ryansmith8255
4 жыл бұрын
Lol does he know who itsjusta6 is
@jesserojas2576
4 жыл бұрын
Ryan Smith lol!
@MichaelAverycarhauler1969
4 жыл бұрын
Very cool with the SK sponsorship, they've literally been around FOREVER. Congrats LZed & team!
@_Furbz
4 жыл бұрын
we could hook you up at the fire department with sponsor?
@jkalash762
4 жыл бұрын
I've been saying it for weeks. He really needs to invest in some fire suppression systems. They're not very expensive especially when it potentially saves your car from burning to the ground or saves your life. Sure it's a mess to clean up when you need to use it but that's a lot better than you or your car being engulfed in flames. He's had way too many close calls to just keep relying on extinguishers.
@trainer2018
4 жыл бұрын
I'm a big SK Fan myself. Been using their tools for years. Thanks for the discount code, I picked up some flexzone impact sockets and some other impacts. Can you guys show all the boxes you have? I am thinking about purchasing one. I would like to know the specs of the boxes.
@DriveLineZ
4 жыл бұрын
Toolgasm gang, damn son!
@Chazileezy
4 жыл бұрын
Congrats to LZ doing Pro1 this year 🤙🏼
@RlineRacing
4 жыл бұрын
Little disappointed that he didn't announce it himself.. but sill big congrats to him
@eliasbergstrom5300
4 жыл бұрын
8:32 you can actually see things flying arounf behind Adam when he shot it to limiter lmao
@P4FElton
4 жыл бұрын
from what im seeing... even his 3.4 2jz pro drift car wont be aible to play with that beast... i mean it still will be lighter and more prepared overal i guess but raw power... his FD car can go like 1000-1100 hp... that shit will be at 1000 because he wants to... he could put almost 1500hp in that shit...
@kellyven1069
4 жыл бұрын
P4F Elton you’re an idiot
@justinpowers8714
4 жыл бұрын
kelly ventresca you trippin lmao the mustang gear ratio is much better for top end power and speed compared to the s15 and the mustang might even have more grip in a straight line
@P4FElton
4 жыл бұрын
@@kellyven1069 well that engine is more robust than 2jz's so yeah... im the idiot...
@kylegilmore3810
4 жыл бұрын
That was from the blow off valve
@fsfabrication7816
4 жыл бұрын
Haha they’re freaking out how it feels and every Aussie watching is like “I drive the kids to school in a 4 door powered by one” 🤣🤣
@Greg....
4 жыл бұрын
Yep, my family car is a falcon with a barra, difference is my kid can fit in the back seat.
@fsfabrication7816
4 жыл бұрын
I’m currently in the process of getting shit sorted to do it to a patrol just bogan up the morning commute haha
@Greg....
4 жыл бұрын
Dunno man, a td42 in a patrol is probably equally as bogan as a barra. You just cant fit 37s under a falcon i suppose.
@joshchaffey
4 жыл бұрын
Exactly! So weird watching from downunder! 🤣
@fsfabrication7816
4 жыл бұрын
greg lol I already own one expensive kettle thank you I don’t need another although a ZD isn’t exactly a prize either haha
@nathanbaxter2329
4 жыл бұрын
I literally just got a job at a shop. I’m gonna spend to much money with that discount 😂
@scottmoore6131
4 жыл бұрын
Nathan Baxter plus you’ll be able to get tools through snap on or matco if they get the truck.
@nathanbaxter2329
4 жыл бұрын
scott moore Nah we don’t have any that show up. It’s a little lube and brake shop. I’m still in high school so I don’t have the kind of money to buy off the trucks
@scottmoore6131
4 жыл бұрын
Nathan Baxter understood, try going to pawn shops you can get sockets for Uber cheap ratchets and other automotive tools , plus boxes. You could outfit a decent box of lifetime tools for $200-300 depending on what all you get.
@nathanbaxter2329
4 жыл бұрын
scott moore I have a bunch of sockets, and ratchets already. I need to start building up other things. Like pliers, good screw drivers, etc. but I definitely plan on checking out some local pawn shops
@peterf557
4 жыл бұрын
@@nathanbaxter2329 Buy good pliers, it's worth it. My Snap-on side cutters were one of the best buys I've had.
@ab37858
4 жыл бұрын
It's probably been mentioned but I'm surprised you couldn't control the gearbox with the Haltech. I think they run the zf 6 speed autos pretty good.
@oldblood_eyes
4 жыл бұрын
insta bois already know what's up
@jacobbrown9418
4 жыл бұрын
Bruh when i saw the s15 i thought it was some one else until i saw the color of the bars
@Janglless
4 жыл бұрын
Yee yee, S15 got a makeover, she's lookin pretty now, although I kinda liked it better in the low-key colour
@sebaflow_arg
4 жыл бұрын
@@Janglless it also has a livery coming its way, so the color is just the beginning
@Janglless
4 жыл бұрын
@@sebaflow_arg oooo, OK, yeah, I thought It looked a bit wierd just the plain colour, livery would make such a big difference
@SHMUNKY_21
4 жыл бұрын
Hell yeah
@Rysgarage
4 жыл бұрын
Soo glad to c u guys messing around with our good ol barra need more of u guys in the states to jump onto barras
@nolsi-ew5gn
4 жыл бұрын
Adem: "we will fill you in on mustang stuff a little bit later" Instantly skips to mustang stuff #BARRA # AussiePower
@Lisa4Me2
4 жыл бұрын
SK Tools!! Holy crap!! My favorite hand tools. These go WAY back and were always among the best tools a person could get their hands on. High quality pro-level mechanic tools. My dad had these when I was a kid. I mean over 50 years ago. Excellent mechanics tools. What a deal!! If I were looking to buy new mechanics tools, it WOULD be SK.
@rudyrobbin2499
4 жыл бұрын
“This thing can take the hubs off a 747” best line lmao
@matthewdonaldson5464
4 жыл бұрын
Not really??
@rudyrobbin2499
4 жыл бұрын
Matthew Donaldson I cant have my own opinion? wow what’a world we live in.
@KurtK207E92
4 жыл бұрын
It's the zf 8hp that's most commonly used with the GCU unit I believe. They do some really cool stuff with those setups
@yellowha2011
4 жыл бұрын
Very proud to see where adam is now. So stoked for you dude. Been watching you since the old how to bmx videos man just super rad to see where you are now
@HiggyRSQ
4 жыл бұрын
No replacement for displacement, the Barra is good for HP as well as Torque due to the stroke. Forget the clutch when initiating, just floor it.
@JaredR1996
4 жыл бұрын
That Collette edit tho 😂
@grahamefreestone5309
4 жыл бұрын
@@pennycopperhatch9315 or "Boom".. ;-)
@mdawsonh
4 жыл бұрын
Timestamp?
@rick-hj3jg
4 жыл бұрын
💀😂😂😂
@JaredR1996
4 жыл бұрын
Hydrific 14:36
@jazzmangocats
4 жыл бұрын
Have a bit of a Google of de-stroked Barras. Reducing capacity slightly (and perhaps with the use of lighter pistons/rods) yields a much higher redline for even more top end and a way angrier sound! Keep in mind for when you blow this one up sometime in the future :-)
@SgtRock4445
4 жыл бұрын
Damn the Barra sounds like a monster!
@ShadowtheRagdoll
4 жыл бұрын
can't wait to see the first rips in this car. I'm in New Zealand and own an XR6 Turbo, so I know first hand barras are torque monsters
@mattsanford5007
4 жыл бұрын
I’m a heavy duty diesel mechanic and those “huge” sockets are small to me😂
@randomchannel4886
4 жыл бұрын
Lol they work on cars not fuckin dozers💀
@mrpoopybutthole6314
4 жыл бұрын
The HTG GCU is used most commonly with DCT transmissions from bmw M4/M3’s. So it’s pretty much a full sequential. When being used with an Auto it does also have a transbrake feature.
@spar8334
4 жыл бұрын
Impact swivel i use all the time especially on bellhousing bolts
@alexmmed
4 жыл бұрын
14:39 I'M DEAD 😂😂😂
@ForeverLoco4
4 жыл бұрын
The impact swivel sockets are amazing
@reidmyers1541
4 жыл бұрын
SK sponsorship? Barra GT350 vs ItsJustA6 GT350 or GT?
@marvinbenjamin.
4 жыл бұрын
The hellephant would spank all of them.
@elibearden2754
4 жыл бұрын
Marvin Benjamin did anyone ask, Hey Marvin Benjamin how would a hellephant compare to those cars? No. Stfu.
@marvinbenjamin.
4 жыл бұрын
@@elibearden2754 they still would get spanked on the track.
@elibearden2754
4 жыл бұрын
Marvin Benjamin ok? Cool
@elibearden2754
4 жыл бұрын
Marvin Benjamin I hate fords I was just wondering who asked about a hellephant
@dodgingspice55
4 жыл бұрын
As an Aussie that owns a Barra may I ask what exhaust you have because it sounds so much crankyer then anything I've heard
@SnuffySpaghetti
4 жыл бұрын
“My GT350’s Voodoo went up in flames so I put a 1000hp Barra in it.” Imagine being able to say this.
@tylerlandry6652
4 жыл бұрын
Blows my mind to see how far you’ve Come, especially with your team as well. Props to you sir.
@Oldhotdogwater
4 жыл бұрын
“Look how big these sockets are!” *Laughs in diesel tech*
@robspec9788
4 жыл бұрын
Forklift tech here. I use those on a daily basis 😂
@reaganthompson5499
4 жыл бұрын
I feel that
@jimmyoakeslift4374
4 жыл бұрын
I laughed when they were fan girling over a 3/4 ratchet haha, that’s still a little baby socket
@BeninoisAxel
4 жыл бұрын
I agree, I use 1” ratchet daily 😅
@phatboizbackyardkustomz9006
4 жыл бұрын
SK is nice tools been using their stuff for years.Used to be a independent tool guy in your area that did SK don't know if he's still around.
@demamp
4 жыл бұрын
Fastest click of my life...
@crimson8135
4 жыл бұрын
same
@Sean_Farmer
4 жыл бұрын
SK Tools are top notch. Everything I've ever owned from them has been great.
@hyper_gamerpro1014
4 жыл бұрын
I love the Barra swap into the mustang keep up the good work
@Rozza43
4 жыл бұрын
I use to use all SK, until I no longer had a dealer around me, so I made the switch to snap on. Still have quite a few SK tools in th box tho.
@Burtonomous62
4 жыл бұрын
Motionautotv: 2jz mustang Adamlz: hey Trevor im happy for you and all but BARRA Yall should meet up and get drifty
@Binford2500
4 жыл бұрын
I was just looking at that controller to help me run a ZF 8hp90 in my 335d. The stock transmission (ZF6hp26 a good tranny for it's time) is only rated for 446lbft (6lbft over standard output) and people often run into issues even just with tunes. It would be awesome to do a compound turbo setup with a good transmission that will hold 1000lbft, and shift a bit faster.
@memorialberry2861
4 жыл бұрын
Can’t wait to Hear the mustang drive 🥵🤤
@caseyb65
4 жыл бұрын
I am even more hyped for the dyno 😍😍
@simonsays4171
4 жыл бұрын
That barra sounds amazing!!! But whats with the turbo? Is it even boosting???
@zaiikgo3377
4 жыл бұрын
everyone: wow cool motor Adam Yohan: hehe barra go brrrrrrrr (i might have spelt Yohans name wrong correct me if im wrong)
@JuanMartinez-zw4tn
4 жыл бұрын
I’m also trying to figure out how to spell it, I think it’s Johan. But sometimes it sounds like John
@celeroon89
4 жыл бұрын
@@JuanMartinez-zw4tn Johan is a hebrew name and is spelled with J, but if he does idk :P
@joelpena8890
4 жыл бұрын
It’s spelled Johan, i have him on instagram which is how i know lol
@jonathanklenner2678
4 жыл бұрын
Hey Adam did you know there's a better do it all tool im a dairy farmer i have lots off them but I have a problem were they skip a tooth ones I have lock into place so they won't skip a tooth
@billwatson6844
4 жыл бұрын
So can someone tell me how to get a tool sponsorship. I need this. 😂
@gordowg1wg145
4 жыл бұрын
I sure hope their quality control on their socket sets has improved from back in the day! My first 3/8" socket set was S-K - ***ing expensive but a prize for top 'Prentice that year - the 9/16 split in half putting it on the bolt before even applying torque, a couple of others shattered with moderate torque on the OEM 'strong bar', which later snapped the pivot bolt under a little more torque - and at the time I was a skinny teen, so not even that strong. Don't recall any problems with the spanners, and still using them. Haven't bought and of that brand since, but that full kit looks cool! BTW, if that chap thinks the 3/4" stuff is cool - wait till he sees 1" drive stuff - biggest I've used was 2 1/2" drive, that used hydraulics, and there is much bigger stuff out there.
@MightyMushroo0m
4 жыл бұрын
Lucky guy getting a tool sponsor, having to spend thousands over the years just to do my job really sucks
@scottmoore6131
4 жыл бұрын
Mew I know your pain I’m retired from mechanics life I ruined my back racing.
@Dabagel100
4 жыл бұрын
Did you at least claim it against your income so you did not have to pay more taxes. (Assuming Murican viewer, if not carry on because I have no idea how other taxes work lol)
@billday762
4 жыл бұрын
Actually it sounds like a Sydney Taxi with a broken exhaust. Was that valve cover green before the pink paint job by any chance. ?
@BarteXtreme
4 жыл бұрын
Hell yeah, HTG FTW!
@scrythis1
4 жыл бұрын
That is a HEALTHY engine. That's the way engines are supposed to sound
@aidenanderson4343
4 жыл бұрын
When you realize that itsjusta6 got two full sets of sk tools🤫🤫🤫
@jamessuman2151
4 жыл бұрын
Please re run the turbo water feed it come out of the bottom of the thermostat housing off the metal pipe, not out of the top! Top is for header tank bleeding!!
@Dominic-kt9wy
4 жыл бұрын
Who else liked before watching?
@gtgodbear6320
4 жыл бұрын
That sound seems like it fits a Mustang. It'll sound a lot better driving and hitting boost and blow off valves. Do they make stroker kits like a 4.2-.4L.
@eelispalok
4 жыл бұрын
Early gang boissss
@Garrett_LCD
4 жыл бұрын
I’m sooo jealous. SK tools are hands down the best. I have owned them for 20 years and never broken a single one yet.
@MrMonkeyworld9
4 жыл бұрын
unfortunately i was only the second like lol
@Anon.G
4 жыл бұрын
Unfortunately I was only the 464th like
@Rafhael91345
4 жыл бұрын
Nothing to ashmed
@FlameTM
4 жыл бұрын
@@Anon.G Unfortunately, I was only the 928th like.
@codyw.3928
4 жыл бұрын
Honestly it sounds EXACTLY like a turbo 4.0 out of an early body (pre 99) Jeep Cherokee! I love it
@martynhicklin9848
4 жыл бұрын
Been looking at that gcu for a while really interested to watch this build
@bvonroth
3 жыл бұрын
This video makes me smile so much and feel so proud to be an Australian. I’ve had a cammed Windsor V8 and my Barra turbo absolutely shits all over it. No wonder the techs who created the turbo motor called it the seagull, they knew it would shit on everything built and sold in Australia
@nielssen21
4 жыл бұрын
Been following LZ, from Norway for 1,5 years now, and now I started my own channel :D You really encourage me to do this, Adam! So wish me luck! Peace!
@seangreene64
4 жыл бұрын
Love SK tools very expensive where I live. Still have a complete 1/2 drive set from the early 90’s.
@frankmuniz2249
4 жыл бұрын
Congratulations on your new sponsors. When I went to mechanic school when I first got my real mechanics job at a dealer i n s k tools I love those tools and I'm glad that they make it here in America
@Getsum-ii
3 жыл бұрын
Why did you pull the whole motor out for the torture converter.? Jack the car up drop the trans fill the torture converter with oil slip it on the bolt the trans up ??
@ivyleaguesupport
4 жыл бұрын
I'm so thankful to hear your taking over Tommy's merch. It took me 6+ months and many many messages to get my merch from the last giveaway!
@jameswhiteman6901
4 жыл бұрын
A utube god and a pure genius.... Australia loves you mate. . .!!!😍😍😍😍😍😍😍😍😍😍
@christopherbarclay7482
4 жыл бұрын
Adam thats what 4 litre six turbo Barra sounds like . Nothing like a 1jz or 2jz as the engine isn't holding back lol . The Barra will change minds wherever you take it . Us Aussies know how to make massive power from a 6 banger . The rest of the crew will finally see how mad the Barra really is . Adam do you use distilled water when filling the cooling system ? Tap water has too many minerals in it to work as well as distilled water . Plus why do you not use a coolant or waterless coolant to help keep engine temp down ? Have just upgraded my radiator on a 2003 VY Commodore sedan to full alloy and know that electrolysis is the killer for radiators . The consequence of using tap water is less cooling capacity . Know you lot are smart but not sure if you know of this . Aussie Barra for the win lol .
@sethray1704
4 жыл бұрын
Adam there are some amazing long nose pliers you need. They have a curved end on them so you can get them on radiator hoses or any other hoses. Just look for hose pliers they are the best thing ever.
@Master_Psyper
4 жыл бұрын
Awesome job on the sponsorship Adam, and to get a 25% discount for the community? You’re the hero that Gotham needs
@tdlaustralia7791
4 жыл бұрын
So cool to people doing stuff with barras over there.
@jaredanthony8070
4 жыл бұрын
Actually sorta surprised that the new current sk ratchets look a lot like the old style which is great because the old ones feel great in the hand! AND THEY HAVE SCREWS SO YOU COULD TAKE EM APART TO REPAIR EM AND GREASE EM!
@dapperdanbuilds
4 жыл бұрын
I love seeing how far you've come as a car guy! BTW, Grant is moving to FL. He's not allowed to go back!
@donarcher7002
3 жыл бұрын
Big thing with teeth is referred to here in Oz as FAFT (Fits any F--king Thing), where as a FAS (Fits All Sizes) or Shifter is what we call an adjustable wrench
@skidoorox555
4 жыл бұрын
no replacement for displacement, sick build man cant wait to see it rip
@chaseherbst7197
4 жыл бұрын
Will the hood need to be modified to close?
@deannaedwards1788
4 жыл бұрын
It's awesome to see you finally have some awesome tools for those incredible boys of yours who are masters in my eyes in the car world. And that engine sounds bleeping amazing!
@GIGABACHI
4 жыл бұрын
BARRA start begins @ 5:49. You're welcomed. 👋🏻
@barrykeer9892
4 жыл бұрын
Hi Adam , got my gt350 shirt today and rocking it here in the U.K. .
@terry2387
4 жыл бұрын
Sick swap man! Ford should take notes 📝
@jessetate4641
4 жыл бұрын
Adam trust me, after it's tuned unplumb the waste gate and put a 2.5" screamer on it. You won't regret it.
@bubbalee9237
4 жыл бұрын
@Adam LZ that monster set you opened @4:50 is just like the “REAL” Craftsman set my dad gave me that he bought in the late 70’s. He said he paid over $500 for it way back then so no telling what that is in today’s money...✌🏼👊🏼😷
@charlessmyth467
4 жыл бұрын
as a fellow car guy... my mouth is watering at the assortment of tools
@gabehotho7649
4 жыл бұрын
The swivel impacts are amazing, I inherited my grandfather's and they make life good
Пікірлер: 1,4 М.