Built your empire by grinding out YT vids and details to then film this series and have it all be a write off…love it! You deserve it from all your sacrifice and hard work. Well done! 👊🏻👊🏻
@matiasbardon7619
2 жыл бұрын
why dont you put the number of the episode in the title??
@joelbuchanan471
2 жыл бұрын
That was amazing. The new lights are bangin. I want to be the tech doing the application of the chip by throwing it at the wall. That looked like fun. So you're going to be welding there too? Great update Mitch. Thanks for explaining it all.
@leonardo3011
2 жыл бұрын
Can't wait for the next episode, Mitch!! See ya
@tkay711
2 жыл бұрын
Can't wait to see videos from your new studio!
@chowceo
2 жыл бұрын
Oh yea I’m glad those divits filled in 😆 I was thinking you’d be happier that being done ✅
@dennisw.2366
2 жыл бұрын
I made it here this early by accident.
@quidsey
2 жыл бұрын
I was losing my mind watching them coat those beams with the holes, etc in them thinking they're going to just leave them like that! I know a bunch about these coatings and they should have filled them all with epoxy, ground down the excess then coated it. When do you expect to be in the new space working?
@davidking3699
2 жыл бұрын
A skim coat of something would have been a superior finish... epoxy, render, whatever would be suitable for the final coat...
@coltengebo4135
2 жыл бұрын
Could’ve just done a quick coat of Ardex over the wall , isn’t very hard to apply either.
@stevey6121
2 жыл бұрын
Exciting to see the great progress. What’s the plan for your garage once the studio is up and running?
@plagueless9829
2 жыл бұрын
Use it
@tylervincent2559
2 жыл бұрын
Video game streaming
@Jennifer_MB
2 жыл бұрын
Good Morning! So excited for this!
@Neptune730
2 жыл бұрын
I'm kind of surprised that you aren't having a washer & dryer for your towels and and such. I would have probably had a stacked washer/dryer.
@pinkapotamus9266
2 жыл бұрын
That was great!! Walls and floor coating!!! Watching them apply the chips was cool, and it did look fun. Can’t wait for episode 7!😄💜💜💜
@ladysha1
2 жыл бұрын
I've never seen chips being applied before and it was cool to watch and definitely looked like it was fun to do.
@philscott1922
2 жыл бұрын
Mitch, I love your outros! One suggestion...please tune that low E string.🙏
@notyou9932
2 жыл бұрын
When is the next episode comming?
@trentwilliams6778
2 жыл бұрын
Awesome that place is coming along
@jaydamanyo
2 жыл бұрын
The dude sanding the concrete floor has some awesome kicks!
@Financial_Awareness
2 жыл бұрын
Built your empire by grinding out YT vids and details to then film this series and have it all be a write off…love it! You deserve it from all your sacrifice and hard work. Well done! 👊🏻👊🏻
@tracyaynes5230
2 жыл бұрын
Looks great...BUT...why didn't they fill in all those holes on the on the side walls before they painted and put the chips on? And what is a 50 Amp welding plug for? Your shop is amazing.
@mdalerodger8844
2 жыл бұрын
I wondered about that as well. Moisture penetration points. In fact, given that this is going to be a high moisture room, I wonder what steps have been taken to prevent mould from growing behind the drywall and elsewhere? I would think that the build should have been treated like a wet room bath given high volume of moisture that will be in that bay. Wondering ....
@shirleypedersen7406
2 жыл бұрын
You’ve probably said before but when is the shop going to be finished?
@bimadwiatmaja9105
2 жыл бұрын
Finally the video that i have bern waiting for, keep up the great work friend 👍🏼
@twoodbeats
2 жыл бұрын
Applying that chip seemed like the most fun part, plus it looks cool
@mozzie22
2 жыл бұрын
I was with you until you textured the ceiling. Why?
@karenhoward8542
2 жыл бұрын
Why did you do a textured ceiling with all the humidity in the air during vehicle washes?
@davidfrank2824
2 жыл бұрын
Really starting to come together. That floor grinder for anyone doing their own floors you can rent one here in the States from Home Depot. Just be aware it is a dust maker. If you don't have a Shop-Vac rent one when you pick up the machine. I like what you're doing on the outside. Really can't wait to see it when it's all done. Good call on adding more outlets. With how your walls are it would be a bear to run wire once the wall is sealed up.
@raven720
2 жыл бұрын
These videos are too short. I can watch this all day
@raphaelszok8561
2 жыл бұрын
Be glad to see where Mike has his mancave.
@georgeking6631
2 жыл бұрын
It’s crazy! I watch this series with such excitement to see the process and eventually the end product. I cannot imagine how exciting and satisfying it must be for you whose dream studio this is! Cheers brother, congratulations!
@geofffikar3417
2 жыл бұрын
He has to be over the moon.
@scarfingdownwitla4891
2 жыл бұрын
It’s coming along nicely 🙏🏾♥️
@huckleberry5330
2 жыл бұрын
AWESOME!!! So excited for you Mitch!!! Can’t wait for the finished product!! Looks AMAZING so far!!! Love from Cali ❤️
@Johndoe-eg6en
2 жыл бұрын
Congratulations!!! Can't wait to see it all finished!!!
@sherylrankin1562
2 жыл бұрын
Looks amazing Mitch
@mfrmxcv
2 жыл бұрын
Very fun to watch!
@mpetrie
2 жыл бұрын
Not gonna lie... I'm very curious to know how much this is costing you. A fantastic business investment, though!
@dirtydogfpv1159
2 жыл бұрын
I'm having issues with the plumbing rough-in....especially the water heater. They can still get the pex tubing looking plumb level and square with the world.
@stehouwercamping6585
2 жыл бұрын
Good idea on the 50amp plug. Never know when you may need a car charger. LOL
@marymadigan9707
2 жыл бұрын
Omg fabulous workmanship great job 😎🇮🇪
@danedmonds
2 жыл бұрын
This was definitely one of the more satisfying videos in this series for me. Lol. I loved watching the scraping and cleanup of the floor chips.
@super-human1628
2 жыл бұрын
I definitely love the guitar playing at the end of the video! You should also make a music channel as well!
@dtulip1
2 жыл бұрын
My trying to multi task: Mitch, so the brush off the loose chip and then vacuum the chip Me: the what?...oh CHIP.....carry on >.>
@gkienenb
2 жыл бұрын
Yay a new episode ❤️
@elizabethannfarrow1971
2 жыл бұрын
Them guys doing all the work probably wouldn't say it's a 'fun' thing 2 do ...talkg a out the chipg. Todays retro...Its Sweet home Alabama...I can't wait 4 him 2 get back to his piano.lol! I hv a flute honestly say I cant play the thing.
@Demy26
2 жыл бұрын
Very interesting. Quality work
@shazzorama
2 жыл бұрын
That was a very satisfying CONFETTI PARTY to behold!🥳
@rickramdofor
2 жыл бұрын
I love these videos !
@Lothy49
2 жыл бұрын
Oof, watching that fella using the floor grinder without any PPE... He's probably going to suffer from silicosis one day.
@tobygathergood4990
2 жыл бұрын
Looking great! The $$$ you're spending must be considerable!
@lianaramirez6377
2 жыл бұрын
Just curious, but would you ever consider making a video about your products/tools and how each should be used once your new studio is complete? Or possibly make it a series? For example: when to you use the drill brushes, on what type of materials and with which products/chemicals? Just a suggestion 🤷♀
@harmzuay
2 жыл бұрын
Seems like you'd want to patch those gaps before applying that, no? Edit: Watch the video before commenting. lol
@MeepMeepFergie
2 жыл бұрын
Hello. I'm new to your channels. I'm not a detailer. I just enjoy watching your transformations. I'm kind of surprised you didn't install a 2 or 3 compartment sink in-line or up stream of your interceptor (or as you call it, a pit) to clean your instruments and/or for when you take smaller trim items out to clean instead of bending over to the floor. But then I guess it comes down to cost and/or feasible usage verses expense. Same goes with a track on the ceiling or wall for your pressure washing hose so it doesn't get dirty. But then again, I don't know much about cleaning cars and if you knew how I cleaned my car you might cry. Please don't take my remarks above the wrong way. I think you do a great job and your shop is coming along nicely. All that matters is that it what you want and what works best for you. I can't wait to see the final reveal.
@kenrowe5386
2 жыл бұрын
You should get the workers a big pot of Tim hortons coffee 👍👍👍👍❤️❤️❤️
@mv3780
2 жыл бұрын
Ok stupid question. And I am sorry if you have already answered this. Two water lines at the toilet 🚽?
@SuperRtrtrtr
2 жыл бұрын
I don't know about you Mitch but I'm craving a hot fudge sundae with sprinkles.
@alexandreleite2541
2 жыл бұрын
👏🏻👏🏻 very well thought. 👏🏻 you better wear sunblock all the time because those lights.
@stephaniemebis8053
2 жыл бұрын
Playing video catch up… but this was terrific! It’s looking real good 😊
@karenbleemel9732
2 жыл бұрын
How exciting for you. Love watching your progress with your dream shop.
@xXtheyeti1Xx
2 жыл бұрын
Great build
@jerryhoschouer5131
2 жыл бұрын
Looks great 👍
@saracaswell8004
2 жыл бұрын
Coming right along. Bet you are super excited for future first vehicle detail. Hmm. Will it be the raptor? I can't wait
@Alicia_Kanis
2 жыл бұрын
Seeing those chips made me think about my days working at Sherwin-Williams. 😁
@RelentlesslyBrave
2 жыл бұрын
That was interesting. I always like seeing how much goes into creating things. Love seeing this journey of yours & I also love when you play that riff😊
@reecestewart6181
2 жыл бұрын
Hi mate the studio looks brilliant but one thing I would maybe look up on is the regs for the plumbing I don’t know how different it is over there as I’m from Northern Ireland but I’m pretty sure it’s meant to be copper coming off the cylinder/water heater not pex but the regs might allow pex. Also maybe get a clip on that gas line as if it got knocked hard enough it could twist. Not trying to discredit the plumbers who done it just want to make sure you get a good job mate
@robygreen7041
2 жыл бұрын
All I could watch was them handle those dangerous tools with bare naked hands and light sneakers shoes 🥲 why people don’t care about personal protection equipment. Isn’t it illegal? 🤔
@spaceman7915
2 жыл бұрын
Mud and tape??? Do yah mean drywall plastering? Mud is made from clay or dirt, plaster is made from gypsum & lime.
@FireCracker3240
2 жыл бұрын
That chip looks so cool! What exactly is the purpose of it is along the sides of the walls? Is it just cosmetic or functional?
@ChatMotorsport
2 жыл бұрын
the beams.. did they throw all that surplus chip away? seems a waste of money to me, the garage is looking cool though. bet you cant wait to see it finished :)
@crazyleo-ca
2 жыл бұрын
Why don't you do a painting room aswell to work not only with detailing but with restoration aswell? It's so uncomfortable to see those rusty cars, hire Mike to be your painting guy 😂
@chrishealy2059
2 жыл бұрын
I can't believe how they installed those chips. Looks like it's on the sill too. Taking shape. Enjoying the process. I notice you went with a smaller water heater. Is that just for the half bath?
@catgirl8845
2 жыл бұрын
Looking good!
@defresurrection
2 жыл бұрын
When I hit the 👍 button it went from 1.9k to 2k!!! I've been waiting to see that happen! Do I get a prize? Lol
@JohnSmith-xl9bo
2 жыл бұрын
I really dont get "STUDIO". Looks like a nice garage to me. :)
@RWJSJG
2 жыл бұрын
I'm here ⭐
@jaywillet-cruz
2 жыл бұрын
Hey Mitch, Wow😯, it is looking great so far. Stucco ceilings, nice pick. As Always Amazing!!!😍❤❣
@zacharymendiola6593
2 жыл бұрын
I enjoy your content and use some of your methods on my cars. I want to support your business however your company does not ship to my location. Would you consider shipping in the future? Keep up the awesome work.
@darrellbrixey5341
2 жыл бұрын
Thank you for another awesome video🤙🏻🤙🏻
@TS_Mind_Swept
2 жыл бұрын
I know there was a lot of work done in the time of the video, but it just felt so short..the chocolate chip glitter was fun to watch though :p
@jamie-leegoy882
2 жыл бұрын
You look so happy ... I'm so proud o you and ebreything yout doimg .....it looks geeat x
@maykevin5
2 жыл бұрын
I'm assuming you will by hiring someone for that big space?
@schoonergirl2658
2 жыл бұрын
Looking great, can’t believe how good the beams look! You shouldn’t be short of light anyway, it’ll be easy to see the dirt on those dark winter days.
@carlosgaricaresendiz
2 жыл бұрын
Hey bro
@StGeoRUSH619
2 жыл бұрын
Bring on episode 7... it's really starting to come together... love it !!!
@tyl3r_cov3y44
2 жыл бұрын
How long until this whole process is finished? I can’t wait for the results and it’s not even mine. I can’t imagine how pleased you are
@paulrebel8043
2 жыл бұрын
The job got done but they should’ve back filled all those holes & cracks and they wasted a lot of flakes (That you pay for)
@adrianbanks4487
2 жыл бұрын
Hey Mitch are you gonna put a car lifter in the new place. Sorry if you’ve mentioned this I may have missed it
@strongfoundationsautodetai7534
2 жыл бұрын
Love the update Mitch! Thanks for sharing!
@lisaowens1960
2 жыл бұрын
Looking awesome, are you going to an accent wall if so, your logo definitely should be used for your accent wall 😊
@AlexSanchez-fd1oh
2 жыл бұрын
Amazing working you are doing to your shop,, if you were thinking about doing some tile work in the restroom would be glad to instal
@andidede3653
2 жыл бұрын
How long before they finish the studio and if you don't mind me asking how much will it cost roughly?
@Polin-dx5ru
2 жыл бұрын
I’m not sure if you have talked about this or not but I was wondering if you’re gonna turn this into a detailing business like hiring another person or two and really crank out details etc.
@davidvasquez7603
2 жыл бұрын
Hey For the Floor Boards can you save the chip's and Reuse them?
@alabamaoutdoorlife9050
2 жыл бұрын
Playing a little Alabama at the end…nice touch 👌 keep up the good work man
@jessiebullock
2 жыл бұрын
Ooooohhhh!!!! I love the color and the chip! I have the same color and chip in my garage!
@moniquefondse9748
2 жыл бұрын
You must be soooo te ready to put al you're stuff over there and clean al the cars in you're own studio. I love it! When do you think you can work there?
@BrianaGettings
2 жыл бұрын
When do you hopefully expect to be settled in the new shop? Im sure i cannot be the only one wondering 😅 looks great by the way!
@LuckyOJB
2 жыл бұрын
Couldn’t you have just poured the concrete a little bit rougher originally and save that money? Or is that not an option
@TripleGAutoDetailing
2 жыл бұрын
Epic!! What a coincidence there is such an attention to "detail"... 🤔 #luv_it 🙏🏻
@digsindirt4490
Жыл бұрын
I’m binging this series and loving every bit of it. Awesome job.
@davidhocking561
2 жыл бұрын
I think when you're finished with this you should do another video showing beginning to end that would be fun I know what would be long but it would be exciting to watch.
@tomlanko2547
2 жыл бұрын
Why didn’t you choose a spray foam insulation for the walls?
Пікірлер: 275