Sometimes things don't go to plan, like in this video! >>>>>> kzitem.info/news/bejne/14CZzqh7oX1enoY
@GardenTractorBoy
Жыл бұрын
It was great to see your mill in action especially cutting large boards like those. Great video, thanks
@BuildALotAcres
Жыл бұрын
Thank you sir. It feels good to get milling again. Finally some nice weather
@happeningoutmybackdoor
Жыл бұрын
I had 95 pulp cord of white pine harvested from my property this past year. I had a problem finding anyone willing to purchase it, but finally did. I have more left to harvest, some as large as 38" breast height.
@BuildALotAcres
Жыл бұрын
@@happeningoutmybackdoor Good luck in your sale 👍
@BuildALotAcres
Жыл бұрын
@@happeningoutmybackdoor Good luck in your sale 👍
@ganprottas6259
Жыл бұрын
Gorgeous logs there, you looked like like a pro running that mill.
@BuildALotAcres
Жыл бұрын
Thank you very much 🙏
@OrangeismyNewGreen
Жыл бұрын
You milled some nice pieces Case 👍🏻, great job 👍🏻🙋🏼♂️
@BuildALotAcres
Жыл бұрын
Thank you sir 🙏
@firewoodathome
Жыл бұрын
Nice stick to mill.
@BuildALotAcres
Жыл бұрын
Thank you sir 🙏
@grammymae8481
Жыл бұрын
GReat job. Every time we mill pine we seem to hit metal.
@BuildALotAcres
Жыл бұрын
Haha. Right on the money there. Check this one out!!! kzitem.info/news/bejne/14CZzqh7oX1enoY
@kirkkeller2871
9 ай бұрын
Just a thought. Once cut #1 is complete, I have had great success with cut #2 exactly square to #1 by flipping the log so the cuts align perfectly. No need to be concerned about how the log “sits” against your stops for your second cut. Most of my milling is for cants.
@BuildALotAcres
9 ай бұрын
Thanks for the advice 🙏
@noelstractors-firewood57
Жыл бұрын
Nice. Lots of firewood in those slabs. How did you get it square Case after the first cut. The backstops are not very tall. And what is the thing on the ceiling at the end of the cut that swings back and forth. Great video. I like watching that. Have a great day.
@BuildALotAcres
Жыл бұрын
Thanks Noel. I just get it flat against the stops and eyeball it. I have used a framing square in the past, but don’t feel it’s necessary for framing lumber. The thing swinging is the hoist controller. 👍🙏🍺
@grazynazambeanie5963
15 күн бұрын
I'm superman , I don't need safety protection
@theshadow4292
Жыл бұрын
Sawmills are no different than any other consumer product that has multiple manufacturing competition. (i.e.) The old adage, "You get what you pay for" is not just a slogan, it's a recorded factual truth within all commercial and industrial corporations. As such, anyone who is thinking about buying a sawmill should think long and hard about what their plans are for the mill, why they are thinking about purchasing a specific name brand and model, how long they expect the mill to last, what size of logs will they be cutting, have they got extra cash for breakdowns or will they be getting a good insurance replace and repair policy with the mill they are about to purchase, will they have a sufficient supply of tree logs to cut, if you are cutting for profit, will you have customers and/or mill competition, etc. etc. etc. The list goes on and on, so be careful and take your time, and most of all, consult with a long time sawyer before making a final decision to purchase a mill !!!
@BuildALotAcres
Жыл бұрын
All great points and very true. I brought up many of these things in a video I did about 6 months ago.
@bruceguidosh2120
Жыл бұрын
How fast are the rpm's you're running? Just listening, it doesn't sound as high as what the working load rpm usually sounds like!
@BuildALotAcres
Жыл бұрын
Good ear. The throttle isn’t allowing the rpm’s to go as high as I’d like. I want to adjust it
@bruceguidosh2120
Жыл бұрын
@@BuildALotAcres Yup! May improve performance of the mill !
@doc3356
11 ай бұрын
Yes, definitely get the rpm's up. Enjoyed the video though.
@terryatpi
10 ай бұрын
Was going to say the same
@dustinsmith7353
9 ай бұрын
Try checking the throttle cable near the motor. Sometimes it needs adjustment from the factory. SawingwithSandy has a video with this same mill and he shows how he adjusted his after assembly. Great looking outfit though.
@jgfjhdgfhjhf1081
11 ай бұрын
Im interested to buy this kind of mill
@robertcalaway4970
10 ай бұрын
Why didn't you use the tractor loader instead of the winch to turn the log that is what I use. I have nothing over my mill
@BuildALotAcres
10 ай бұрын
Good question. I do use the tractor quite a bit. I guess sometimes I just prefer the slighter movements of the winch.
@h.w.kueckelhan2322
Жыл бұрын
Don't you have your log stops in backwards??
@BuildALotAcres
Жыл бұрын
I don't believe so. The angle goes in towards the log so when you roll it, the log rolls easier and doesn't catch on the corner of the stop.
@ericjohnson6456
Жыл бұрын
This may be too late, but I've had a generator that wasn't putting out electricity before. I started the generator, plugged in a drill and turned the drill by hand backwards while holding the trigger. Steve goes over it here: kzitem.info/news/bejne/22iVz42rn6iJlnY
@BuildALotAcres
Жыл бұрын
Thank you sir. I flashed this generator before when I had this same issue and it worked then. It was used up until not long before this video. Nothing is made to last anymore. I appreciate the link 👍
Пікірлер: 34