You are the biggest inspiration for starting a KZitem account and making air rifle videos. It’s awesome to have a face that present always new handy stuff. I don’t like videos where the person isn’t shown, I can’t build a connection to the video. Big thumbs up for you! Back then I really thought I would need the m3 and sold my mk2 with big loss. A lot of stress just to acknowledge that with some huma air parts I could have had a cheaper setup and would achieve the same things. I always just learn out of my mistakes later 😅 I hope I can upgrade my m3 with some of these power parts 🤪 HUMA R
@Airbuks
2 жыл бұрын
Thx for the support mate 🙏🏻 you can indeed upgrade your MKII to almost a M3 but you won’t be able to upgrade to a dual regulator or quick tune system . That quick tune is kind of handy when you frequently change settings. But good to see that you can bring the MKII up to speed 😉 Good luck with the giveaway
@lawrencecheung73
2 жыл бұрын
Thank you SO much for your informative videos ! You have helped me tremendously with these "HOW TO" videos.
@Airbuks
2 жыл бұрын
Thx 🙏
@kevinstoughton8476
2 жыл бұрын
HUMA R. Thank you!
@bluewater454
2 жыл бұрын
You are right. It does take a lot of time(and money) to tune a rifle to a slug. I’ve been looking into finding a good slug mould to make my own. I think it might be worth it in the long run.
@benjaminpieters507
2 жыл бұрын
The word is HUMA AIR. Love your video on this install, as always. Would really love these peaces on my mk 2, they would work nice with the huma reg i allready have. Had a full HUMA crown mk1 and was a real powehouse! Bedankt voor de goede uitleg!
@Airbuks
2 жыл бұрын
Graag gedaan en succes 🍀
@gerhardpotgieter9091
Жыл бұрын
Wow, i also have the Huma air power kit with the lighter hammer weight but struggle to shoot 34gr slugs past 900fps with a 600mm barrel. That tells me the 72cc plenum and power block makes a huge difference. I'm going to try 30gr slugs to reach my desired velocity.
@Airbuks
Жыл бұрын
Have you installed the softer valve return spring?
@tomlpnexus
2 жыл бұрын
Nice videos always, HUMA AIR is the solution if you want to upgrade or custom your impact to de next level. I put everything from the M3 even the trigger, i have long hands, with the m3 trigger i can put in my fingerprint in the center if the blade.
@peashooter950
2 жыл бұрын
I just installed this in my .177 Maverick. Or that is, last week i put in the dual port transfer port. Today i got the pin probe power kit, put in the pin probe, and got a little speed lift, put in the lightest of the 2 hammer weights, and got a 300 FPS speed lift for 1107 FPS in total. I have not used the stronger spring or the heavy hammer, dont think i need that in a .177. Huma of course......... 🙂 Slugs,,,,,,, Of course .......... 🤠 Sadly do not have Instagram or other social media, so can not play for another kid,,,,, which i could use.
@Airbuks
2 жыл бұрын
If you fill in the word you have found you will still be able to participate 😉
@KevinWood44
2 жыл бұрын
First time seeing the HUMA R slug kit. That heavy spring adds some snap
@Airbuks
2 жыл бұрын
Yes , it add some real power 💪🏼 to be honest it surprised me aswel
@jamesdonnelly3301
2 жыл бұрын
Love the "HUMA AIR" product line, congratulations on your partnership with them. HUMA R is all I saw, watched it twice, did I blink?
@Airbuks
2 жыл бұрын
You might have blinked 😉 but if you wrote Huma it’s fine 👍🏻
@dchung007
2 жыл бұрын
Another great tutorial and HUMA AIR products are quality!
@Airbuks
2 жыл бұрын
Thx
@carlmatera332
2 жыл бұрын
Love the HUMA AIR products. The install video makes it so easy even I can do it!
@Airbuks
2 жыл бұрын
👍🏻 glad the install videos can help
@xaramarcus5796
2 жыл бұрын
HUMA AIR....good product... Very spectacular and informative videos...thanks
@Airbuks
2 жыл бұрын
Thx 🙏🏻
@chrisfigueroa3361
2 жыл бұрын
Awesome I did install.the heavier hammer spring from huma and yes it did not want to seat correctly so I back the adjustment screw almost all the way out I'm using the regular hammer weight with the two washer from slug kit its like 7 gm ...and on power wheel on 3 I was able to shoot 43.5 gr nsa at 965 fps with 150 bar I think this spring is for heavy slug shooting when I tried adjusting the screw in more my pw would not turn
@Airbuks
2 жыл бұрын
Thx for the info , is that with a 700mm barrel ?
@chrisfigueroa3361
2 жыл бұрын
@@Airbuks yes sir
@MrPonosify
2 жыл бұрын
What caliber?
@chrisfigueroa3361
2 жыл бұрын
@@MrPonosify 25 cal
@SuperKillerJeans
2 жыл бұрын
The word is HUMAAIR.
@Crazyhorseracing461
2 жыл бұрын
Nice video, I always like watching your videos, keep up the good work HUMA R
@Airbuks
2 жыл бұрын
Thx
@Jack11667
2 жыл бұрын
upgrade by Huma Air 👍👍i only use huma air for my impact regulator & upgrade.. the best.. choose only HUMA AIR.. ❤️ it..
@Airbuks
2 жыл бұрын
👌🏻
@sakiskiosses5395
2 жыл бұрын
Always the best videos best regards from Greece HUMA R !!!
@Airbuks
2 жыл бұрын
Thx 🙏🏻
@michaelbattin6717
2 жыл бұрын
Thank you
@peashooter950
2 жыл бұрын
The word i guess are Huma. And BTW i might need more of their products, right now waiting on permit to buy silencer And. I have contemplated replacing the back REG on my Maverick with a Huma one.
@ericeverson6822
2 жыл бұрын
Humra is the word
@duroboat69
2 жыл бұрын
Luv your videos I watch all of them and the red letters spelled HUMA
@Airbuks
2 жыл бұрын
Thx mate !
@james1795
2 жыл бұрын
HUMA R. Thanks for the instructions.
@Mike-yq6jg
2 жыл бұрын
Have done a video on the kit for a maverick
@peashooter950
2 жыл бұрын
BTW if Huma could come up with a bottle adapter for my Vulcan 3, so i could use FX valved bottles on it would be nice. Having to bleed both gun and bottle to get to regulator is expensive on air for us people that do not have a compressor.
@Airbuks
2 жыл бұрын
Thx for the idea , I will pass it on to them 👍🏻
@franckbecanfayeboue4877
2 жыл бұрын
HUMA AIR
@zponige1
2 жыл бұрын
Love the quality of your Videos. Always with the Right Info, would greatly appreciate the Human "H' Kit for Slugs
@Airbuks
2 жыл бұрын
Thx for the support, did you find the word with the letters that are popping up true out the video ?
@GRNYDRKNSS
2 жыл бұрын
H U M A is the word
@petanihunter
2 жыл бұрын
Goood👍👍👍
@seyhmusaltunsoz3675
2 жыл бұрын
👍
@joostvanleersum4332
2 жыл бұрын
Great video again! I think the word is HUMA
@jerekreiser3493
2 жыл бұрын
Making it look simple..huma air!!👌
@Airbuks
2 жыл бұрын
It’s not that hard 😉👍🏻
@DK-TechCorner
2 жыл бұрын
HUMA AIR and thanks to you for another great video 😎👍
@Airbuks
2 жыл бұрын
You’re welcome
@jeanpierrebouxin
Жыл бұрын
merci très bonne vidéo merci très instructive un papy de FRANCE!!!
@Airbuks
Жыл бұрын
Merci pour le support
@thanh10890
3 ай бұрын
The gun still adjustment macro and micro after install hammer.I heard someone said can’t adjustment if install heavy hammer?
@brannonbrown7720
2 жыл бұрын
Thanks for another informative video humar
@Airbuks
2 жыл бұрын
You’re welcome
@zxveleno
Жыл бұрын
Congratulations your videos are very beautiful, I have had an M3 for a month and I would like it to shoot well slug I have a 700mm superior heavy 22 barrel 1:18 which slugs are more suitable and which speed should I use thanks and congratulations
@Airbuks
Жыл бұрын
Hi thx for the support . Prepare yourself 😉 getting slugs to shoot good isn’t as easy as pellets 😉 First thing you want to do is ask yourself what kind of weight slugs you want to shoot ? Lighter ones will give you a bigger shotcount and heavier less offcours but also puts more demand on your system. I would always advise a good lead base slug like the Javelins or the ZAN slugs But these have a price tag offcours The little cheaper option and still a very good slug are the Knockout slugs by JSB or the H&N slugs . They are not pure lead based but I have very good experience with them In terms of speeds there is no magic number I am afraid. Every gun/barrel likes it a little different, but between 980-940 is what you are aiming for . Try the slugs you have chosen in that velocity range at different speeds and see what performs the best . And then I haven’t talked about the tune yet that has to be in balance/ harmony 😉
@zxveleno
Жыл бұрын
@@Airbuks Thanks for the answer, in Italy there are no expert people like you and I find myself with an FX M3 that has many adjustments and a lot to adjust to shoot very well. And I thank you and your videos which are useful for me to optimize my stupendous FX .Thank you
@Blade-du3jt
2 жыл бұрын
Very informative. HUMA R
@thaireesj41
2 жыл бұрын
Waiting for Huma Air to get the larger plenum before I can upgrade my mk11. The letters I saw are IRAU hope that’s right. Had to watch it again and set up an instagram account so I hope it’s worth it 🤪 HUMA AIR.
@Airbuks
2 жыл бұрын
You final answer is correct 👍🏻 good luck 🍀
@Airbuks
2 жыл бұрын
Hi Adrian ! Congratulations you are the winner of the give away !! Please contact me true instagram to exchange the details and send you the price i cant find any details to contact you
@BobbyAlimardani
Жыл бұрын
Thank you so much for the great demonstration. Unfortunately, when I add my tungsten hammer weight the c1 measurement is at 8.5 mm and when I replace the original hammer weight I can reach the required 6.5 mm. I am not using the HUMA Air slug power kit but I am using the FX one. The FX one does not have the slightly longer spring, could this be the issue?
@Airbuks
Жыл бұрын
If you can’t reach to the proper measurement it means your hammerspring pretension is to high and you need to lower it . With the tungsten hammer you anyway cat use the max setting or the impact won’t cock but the er tea weight in the hammer makes up for it
@BobbyAlimardani
Жыл бұрын
@@Airbuks You are absolutely correct, I have set my micro wheel to the max at 16. Thank you this helps me a lot. So what max setting can I set the micro wheel at?
@Airbuks
Жыл бұрын
@@BobbyAlimardani with the tungsten hammer installed I think it will max out at 3,5
@BobbyAlimardani
Жыл бұрын
@@Airbuks Cheers
@josh9465
2 жыл бұрын
I got HUMA and a R left over?
@Kaipocamarao
2 жыл бұрын
Love the videos, keep em coming!
@Airbuks
2 жыл бұрын
Thx
@Arrax90
2 жыл бұрын
powered by HUMA AIR ofc. Love yours kontent.
@Airbuks
2 жыл бұрын
Thx mate
@lesmo9627
2 жыл бұрын
Huma air, and excellent video as always
@Airbuks
2 жыл бұрын
Thx 🙏🏻
@ralstonraz
2 жыл бұрын
MIRAU... 😊👍 What's that? Nice video BTW.
@Airbuks
2 жыл бұрын
Thx
@unballisticr.i.pdadloveand7055
2 жыл бұрын
Great video with great details have you noticed much difference between the mk2 and mk3 HUMA AIR👌👍
@Airbuks
2 жыл бұрын
If you upgrade the MKII like i did it’s actually a M3 without the second regulator 😉 so no power difference
@TsRide83
2 ай бұрын
Can you change the hammer with out taking the top half off
@zacatecano1986
2 жыл бұрын
I have the m3 , so I don’t need to install the rubber ball ?
@Airbuks
2 жыл бұрын
Yes that’s correct, the new valve knob had a similar thing installed in it from the factory, adding the rubber ball will limit your max velocity 👍
@sedatuzuner2280
2 жыл бұрын
Formulation Power= airbucks+huma+fx formula results successful
@Airbuks
2 жыл бұрын
😂 thxx
@JohnJohnson-ol6oj
2 жыл бұрын
HUMA
@Airbuks
2 жыл бұрын
Give away is over , sorry
@medicnine398
2 жыл бұрын
Great video as always! HUMA R
@Airbuks
2 жыл бұрын
Thx
@dirkkeuleers9522
2 жыл бұрын
weer een knappe to the point video houden zo!!! HUMA R
@Airbuks
2 жыл бұрын
Thx
@daiwangel
4 ай бұрын
Good afternoon, my fx impact m3 barrel 800mm huma tungten hammer which is the best weight, I use 27gr slugs second 150 bar
@MasonStormSunny
2 жыл бұрын
Why do you promote Atlas bipod counterfit?
@ericeverson6822
2 жыл бұрын
Man how do I get in on this my 22 caliber m3 should be coming in and would love to win this!
@Airbuks
2 жыл бұрын
Look true out the video for some random red letters that you can make a word with , post it in the comments. Also make sure you are subscribed to the channel.
@streetfighter3k144
2 жыл бұрын
Rust on the original hammer probably because of your shooting outside in cold and humid environment? A stainless steel hammer should prevent rust… groeten, Marc. (Bestaat de kit ook vr Maverick?)
@Airbuks
2 жыл бұрын
Hey mark , ja dat zou kunnen het is een natte winter geweest 🤔 was snel gefixt met wat polish 😉 De kit bestaat idd ook voor de Maverick, vul het woord maar in mocht je dan winnen regel ik het wel met Huma dat je de juiste kit krijgt 😉 www.huma-air.com/FX-Maverick-Slug-Power-Tune-Kit-By-Huma-Air
@streetfighter3k144
2 жыл бұрын
@@Airbuks huma ir is wat ik gezien heb al is dat niet logisch natuurlijk 😀 maar de wereld zit al lang niet meer logisch in mekaar. Schiet wel vreselijk consistent, die Impact van jou. Nu ja, ik mag niet klagen vd Maverick. Wel nog niet met slugs geprobeerd. Succes nog met de verloting en tot een volgende video. Zeer duidelijk allemaal en goed in beeld gebracht! Gr. Marc.
@Airbuks
2 жыл бұрын
@@streetfighter3k144 je kan gelijk hebben 🙈 met een last minute aanpassing is er een letter verdwenen 🤬 , maar geen probleem het eerste woord is voldoende 🤫
@saturmartinez14
2 жыл бұрын
The word is HMIRAU. Great video. One question : I have installed in my M3 the power slug kit from FX, then Is it enough to install the hammer from Huma Air or it's necessary all the set? Thank you very much and great job
@Airbuks
2 жыл бұрын
I don’t think it’s meant to be mixed together, if you open up your impact any way I would install one or the other kit
@jandilla6129
2 жыл бұрын
@@Airbuks which best two?
@justinhromek73
2 жыл бұрын
You are the man! I don’t have the confidence to open my m3 up like that. Are you using a Slug liner?
@Airbuks
2 жыл бұрын
Yes I do 👍🏻
@robertcarrier6237
2 жыл бұрын
HUMA R is the magic word ! I noticed you were using a single shot loader! What make is it please ?
@Airbuks
2 жыл бұрын
Hi , the single loader is my design from several years ago . I gave that design to Huma and they make and sell them 👍🏻
@jonahchua
2 жыл бұрын
@Airbuks I just installed the Huma Pin Probe and I found when I close the bolt slowly it gets caught on the mag is this normal? Thank you
@Airbuks
2 жыл бұрын
Hi , no that shouldn’t be like that . Have you checked if the probe and the probe holder screws are tight
@jonahchua
2 жыл бұрын
@@Airbuks thanks for the suggestions, turns out the pin was too long which caused the jams. I was wondering if it’s normal for the hammer to no longer free float when not cocked on higher hammer spring settings 16/2.5 and up? Thank you
@cgceballos
2 жыл бұрын
Great video and explanation, as always. HUMA R or HUMA AIR ?
@Airbuks
2 жыл бұрын
Thx
@kevintravis2154
2 жыл бұрын
great video. HUMA R
@Airbuks
2 жыл бұрын
Thx
@AboveTheSystem
2 жыл бұрын
What about .177 (4,5mm)?
@Airbuks
2 жыл бұрын
I have no experience with 177 , sorry
@robbypro3370
2 жыл бұрын
I need one of these kits. HUMA R
@Airbuks
2 жыл бұрын
Maybe you will be the lucky winner ?
@jlsol
2 жыл бұрын
The letters are HMIRAU to make HUMAIR!!!
@Airbuks
2 жыл бұрын
Perfect but the winner was already announced 😉
@jlsol
2 жыл бұрын
😲😪😢😭
@arjanboetting8659
2 жыл бұрын
Nice video .. huma air
@Airbuks
2 жыл бұрын
Thx
@nss-diver
Жыл бұрын
Another great vdo. Which country do you live in?
@Airbuks
Жыл бұрын
Europa, where the French fries and chocolate come from 😉
@nss-diver
Жыл бұрын
@Airbuks Owww you're from Belgium une fois 😁😁😁
@Airbuks
Жыл бұрын
@@nss-diver Flemish part 😉 no French
@nuangel
2 жыл бұрын
HUMA AIR !!
@Manavis36
2 жыл бұрын
very good job guys!! 🌶👌🏼
@Airbuks
2 жыл бұрын
Thx
@dc8cappie167
2 жыл бұрын
Huma Nice video.
@richardfletcher4704
2 жыл бұрын
Huma R great video
@Airbuks
2 жыл бұрын
Thx
@AlwaysCovered1227
2 жыл бұрын
I tried the Huma hammer in my M3 357 and it wouldn’t cock so I had to put the original one back in what can I do about that
@Airbuks
2 жыл бұрын
When the hammer and spring was in did you try to reduce the hammerspring tension to see if it would cock then ?
@AlwaysCovered1227
2 жыл бұрын
@@Airbuks no I didn’t today was my first time ever taking it apart and working on it
@Airbuks
2 жыл бұрын
@@AlwaysCovered1227 it is possible if you have to much hammerspring tension the hammer can’t go back far enough to engage the sear .
@AlwaysCovered1227
2 жыл бұрын
Okay thanks
@AlwaysCovered1227
2 жыл бұрын
@@Airbuks do I make that adjustment with the micro wheel or the macro wheel
@FamilyFun183
2 жыл бұрын
Hi! Do this probe work for pellets to? Or do i have to change to the regular?
@Airbuks
2 жыл бұрын
It works for pellets to but I prefer to swap if I shoot pellets
@FamilyFun183
2 жыл бұрын
@@Airbuks Thank you 👍
@ab4171399
2 жыл бұрын
😎👍
@SHShahab
2 жыл бұрын
Hi, which word ? can you explain more please?!
@Airbuks
2 жыл бұрын
I have explained in the video 🤷♂️ there are some random letters hidden during the video that can be put together to make a word you need to put in the comments
@MajTom128
2 жыл бұрын
HRAU
@icuppu2
2 жыл бұрын
HA
@MrPonosify
2 жыл бұрын
Is this 6.35 cal?
@Airbuks
2 жыл бұрын
Yes it is
@MrPonosify
2 жыл бұрын
@@Airbuks My maverick does the same. 700mm barrel 6.35 inch 150 bar reg. Impact should be stronger?
@Airbuks
2 жыл бұрын
@@MrPonosify impact is a little stronger in my opinion, in the video I am using a 600mm barrel
@MrPonosify
2 жыл бұрын
@@Airbuks Yes, but you also tested with a 700 mm barrel and I have identical results on this one. I wanted to buy Impact but I don't see the point.
@Airbuks
2 жыл бұрын
@@MrPonosify The impact has some advantages in tuning that gives you more control , in stands configurations power wise they will be on part
@nokainketerakum7267
2 жыл бұрын
Who win?
@Airbuks
2 жыл бұрын
I made a follow up video picking the winner , don’t remember his name 😉
@natosakita7522
2 жыл бұрын
Huma
@jonahchua
2 жыл бұрын
@Airbuks Is the huma transfer port necessary to work with the huma pin probe or will the stock fx dual one work? Thanks
@Airbuks
2 жыл бұрын
The stock one will also work , the Huma one is just slightly bigger 👍🏻
@jonahchua
2 жыл бұрын
@@Airbuks thank you
@derrickmitchell39dm
Жыл бұрын
I'm about to do this install tomorrow. Anyone with advice?
@Airbuks
Жыл бұрын
What are you planning to do ? Except you want 30cal slug I would always install the lighter hammer the heavy on is only for 30-35 cal in my opinion
@derrickmitchell39dm
Жыл бұрын
@Airbuks it's going on my .35.
@Airbuks
Жыл бұрын
@@derrickmitchell39dm then i would definatly put the heavy one
@derrickmitchell39dm
Жыл бұрын
@Airbuks ok I'm on it. Thanks.
@Airbuks
Жыл бұрын
@@derrickmitchell39dm did you got it installed?
@asshofakhumairoh2713
2 жыл бұрын
Smoga bisa beli snapan tu sya dari indonesa ingin punya tapi syang blom bisa beli smoga dapet di kasih dari si omnya 🙏🙏🙏
@Airbuks
2 жыл бұрын
English?
@asshofakhumairoh2713
2 жыл бұрын
Translet aja pa
@asshofakhumairoh2713
2 жыл бұрын
From indonesa
@Airbuks
2 жыл бұрын
@@asshofakhumairoh2713 if you want to communicate, then you should translate 😉
@asshofakhumairoh2713
2 жыл бұрын
Smoga saja saya dapet senjata dari bapak hehehe kepengin banget punya senjata fx impex m3 pak
@sarhanalhabsi
2 жыл бұрын
HMIRAU
@sarhanalhabsi
2 жыл бұрын
That including the H when you were giving example how the letter will look like. So if that shouldn’t be included then it will be MIRAU. THANKS
@sarhanalhabsi
2 жыл бұрын
Mix them up to1 word will be “ Humair “
@gioanbuzzo3472
2 жыл бұрын
harm
@Airbuks
2 жыл бұрын
?? That not all the letters and you still have to put them in the correct order 😉
@RevolutionIsTheOnlySolution
2 жыл бұрын
HUMA AIR
@rmbprathnayaka2625
7 ай бұрын
I installed the tungsten hammerweight on my fx impact m3 gun but the gun will not load after that.pls help me
@Airbuks
7 ай бұрын
Reduce your hammerspring tension
@rmbprathnayaka2625
7 ай бұрын
@@Airbuks thanks ur rply.its work well
@lnylee6449
2 жыл бұрын
HUMA
@bluewater454
2 жыл бұрын
Love the nuts & bolts videos. You do a great job with camera focus and angle. Watching some of the other channels “how to” videos is like learning surgery from a distance. Nice work.
@Airbuks
2 жыл бұрын
Thx for the support, I try my best to bring it as clear as possible 😉
@alialmahfudi7498
6 ай бұрын
Very interesting
@阿翔朱
Жыл бұрын
Do you have huma air Electric watch for sale
@Airbuks
Жыл бұрын
No
@spartanslugs8765
2 жыл бұрын
Huma R 👍🏼 , great channel , goodluck hope one day i can send you our slugs to review them !
@Airbuks
2 жыл бұрын
Thx for the support, always welcome to try your slugs
@12VALVETORQUE
2 жыл бұрын
thank you for the video! I saw two words HUMA R and ELEMENT NEXUS ;-)
@Airbuks
2 жыл бұрын
Will do 👍🏻
@AlwaysCovered1227
2 жыл бұрын
Do you install the transfer ports ?
@Airbuks
2 жыл бұрын
Yes I did 👍
@jasonknott8477
2 жыл бұрын
Huma air
@OneidaKestrel1
2 жыл бұрын
HUMA AIR
@Airbuks
2 жыл бұрын
Correct but the giveaway is already over 😬
@johnbridges6760
2 жыл бұрын
As usual, another great video. I just added the Huma-Air or R dual port and pin probe last weekend to my Mark II. Had a very noticeable increase in power. Next is to as the spring an hammer. If I don’t win it, no problem, I’ll get it any way. LOL. I’m not sure if I want to upgrade my MKII to a 3 or just buy an M3. Probably cheaper to upgrade but I could give me m2 to my Son, he in love with it. Anyway, always looking forward to your videos.
@Airbuks
2 жыл бұрын
Your son will love the MKII and he can also upgrade it it slowly as he wants , it still is a awesome gun . And you can almost make a M3 out of it 😉 Good luck 🍀 with the giveaway
@davekent658
2 жыл бұрын
All i saw was HUMAIR, but as always very interesting video and knowledgeable.
@kakappawpmaiangche7090
2 жыл бұрын
Never miss out. Lots of love from India. Keep it up
Пікірлер: 272