I put a complete H3 interior in my Colorado including the center console and floor shifter. It’s a great upgrade and very comfortable.
@TRAVISM3
8 күн бұрын
Got any pictures of it online anywhere? I would like to see how it turned out!
@navvet4518
7 күн бұрын
@@TRAVISM3 No. this my closest approach to social media. The back seat can be done but it takes some serious fabrication as the H3 is flat in the back and the Colly has a hump for the drive shaft. The console was fairly straight forward and fits pretty well except where it meets the dash but I have a VHF radio that takes up most of the void. The shifter mounted fairly easily and you will need a Colly shifter cable. You will have to identify the brake light lead and connect it to the shifter interlock solenoid and remove the column shift hardware and bypass the steering wheel lock.
@tomfrantz
Жыл бұрын
Love the FOX 2.0. I put them on my Hummer H3 2007. What an improvement. Cool video thank you
@jesscneal
2 жыл бұрын
Looks pretty straight forward. Cool swap 👍
@WrenchChill
2 жыл бұрын
Yeah wasn't too bad other than the rusted parts!
@alfonsopadron3875
2 жыл бұрын
@@WrenchChill how much money you took on parts??
@ScottKirk-Notredcrew
2 жыл бұрын
Cool build, I miss my old lowered 2wd dr colorado
@supergirl109
Жыл бұрын
Here's the thing: I was planning on saving up my money and trade in my 2012 Colorado to get the new 2023 Colorado. Now that it takes too long to come out, I still like mine and changed my mind about the new one and just keep the old one. lol
@bne7486
2 жыл бұрын
thank u guys so much just got a 05 canyon thatt iam looking to build iam def going to do this instead of the 2.25 lift thanks for the inspiration
@WrenchChill
2 жыл бұрын
Thanks for watching and good luck on your Canyon! 🙂
@user-yh5wt3ls1r
2 жыл бұрын
Ayeee a couple that has a colorado and a Z as well! Awesome
@robertocastillo2260
10 ай бұрын
The 2005 Chevy Colorado is beautiful, but Lena's eyes are even more beautiful. Beautiful Border Collie. Nick and Autum share an excellent job with us again. Greetings, Rob.
@TheLotusWeAre
11 ай бұрын
Love it We all need Our Sidekick "hero"
@ashtonmariefranklin725
2 жыл бұрын
The rear wheels need to come out and match the front wheels trac width. And i would put some nice jungle flares on it. But that's what i would do. Bur it's an awesome upgrade over stock and its not a cheap rough country lift kit.
@WrenchChill
2 жыл бұрын
Good thinking! Nick's dad did quickly add some nice flares to it and there are some 1" spacers on the rear. Thanks!
@cbrown596
Жыл бұрын
@@WrenchChill Was the rear left mostly stock besides the 1" spacers, or is it running a lift on the rear?
@WrenchChill
Жыл бұрын
@@cbrown596 we did an add-a-leaf lift in the rear
@ColbyJohnson
2 жыл бұрын
Weird how rust affects different parts on these trucks. For you your torsion bars were seized. For me my upper control arm bolts were seized in the bushing sleeves lol
@WrenchChill
2 жыл бұрын
Yeah the hardest part of the swap was getting rusted parts off! Anti-sieze and CRC corrosion inhibitor went on everything going back together
@dallassmith9617
2 жыл бұрын
Wish yall recorded the reveal
@c.d.k.7108
2 жыл бұрын
Nice! Been wanting to do this on my 05 regular cab
@WrenchChill
2 жыл бұрын
Do it!
@red_stag05
Жыл бұрын
If I had torsion bars I'd do this for sure. I wanna get the h3 front diff bit idk how to wire it up
@maxs.3486
Ай бұрын
It looks good! How can you get the rear stance to match the new wider front stance?
@curtisbull1583
8 ай бұрын
Nice, when are you guys going to do this on my Colorado? Lol
@jamesfkndean
2 жыл бұрын
Making the the Colorado more and more appealing lol
@WrenchChill
2 жыл бұрын
They are great little pickups
@MadeInMyGarage
7 ай бұрын
I have the exact same truck, color and all!
@nf5557
Жыл бұрын
Great video for the swap and instructions! what would you say the total cost of the project was?
@fitsector4271
Жыл бұрын
Awesome upgrade !!!
@aarontyrrell2931
6 ай бұрын
Looks good
@raysno8367
2 жыл бұрын
new uppers n lowers for me , upper control arm bolts a real pain so cut off , 40$ a bolt ! the big bushing on bottom won't back out unless you drop the whole axle or cut out the body flange ?
@ArturoMartinez-sv4be
Жыл бұрын
Me. Gusto. Como. Quedo. Buen. Trabajo
@shanewright6958
2 жыл бұрын
Great job guys 👍👍🇨🇱
@WrenchChill
2 жыл бұрын
Thanks shane!
@johnnylocke7599
Жыл бұрын
Doesn’t putting longer outer tie rods mess with the steering at all.. Thanks. Did you also have to change the inners.
@rayphillips332
Жыл бұрын
I have a 2012 gmc canyon 4x4 with 58k miles on it.
@tyronemosley6810
2 жыл бұрын
Awesome video👍
@WrenchChill
2 жыл бұрын
Thanks Tyrone! 😊
@danieldressel2548
Жыл бұрын
Can this be done on a 2020 colorado?
@Mendoza.jo3
7 ай бұрын
How much would you charge if I wanted you to do that to my truck? Or do you have any recommendations on what shop could do it?
@Evdrad
Жыл бұрын
Can you fit the hummer caliper on these trucks with out doing a different rim size of doing a hummer suspension conversion
@hectorperez6293
Жыл бұрын
Hi guys,your colorado run smooth or hard,I have one an run really hard,thanks for the video
@Pitman556
10 ай бұрын
Can you use the oem Colorado brakes? So 15in wheels can clear? Or with these mods you have to run the h3 rotor?
@americorivera3843
11 ай бұрын
Very Nice! how much money you took on parts?
@donpelucas
2 жыл бұрын
awesome .... what do you mean by braket lift ... y just got my self a 2005 colorado Z71 will do that upgrade ... part num for those shocks please cant find any fox shock that fit a colorado in stock position like those... will 16 inch wheels fit whit those brakes..... thanks ... nice job.....also what year hummer h3
@Curtissnowintha419
3 ай бұрын
Have u done the rear or no
@GarrettMaffenbeier-tv9uv
Жыл бұрын
How did you fit those wheels aren’t the centre bore smaller or where they the same
@somethingtowatchhere
6 ай бұрын
I am curious, if you know if this can be done with a 2 wheel drive. I know that the suspension (springs) are different, at least
@WrenchChill
6 ай бұрын
If it has torsion bars up front then yes. If it has coils up front, then no
@somethingtowatchhere
6 ай бұрын
@@WrenchChill it has coils
@user-uy6rb3bc9j
Жыл бұрын
IS everything same for 2011 Colorado v8 z71 model ? What's up with that lifted silver colorado supsension mods lol any videos on mods to that looks sick
@matgarland8347
2 жыл бұрын
Do you happen to know anything about long travel kits and weather or not i would have to find one for the h3 or the colorado if I did this?
@johnnyrichmond8359
8 ай бұрын
What did that cost ya brother
@blessingstevens6697
Жыл бұрын
I know this is an older video, but would this conversion use an h3 lift kit if I decided to go taller after?
@WrenchChill
Жыл бұрын
Yes but your chances of finding one of the 4" lifts for an H3 are slim since they don't make them anymore
@alexnordbeck144
Жыл бұрын
Is the stock colorado differential used in this situation how did you convert the h3 cv axles to the canyon did I miss something ?
@WrenchChill
Жыл бұрын
Yes stock Colorado/canyon differential. The H3 CV's fit the Colorado differential
@johncastillo6083
Жыл бұрын
Would a 06 H3 work on a 2010 Chevy Colorado?
@xxkaiserxx2505
2 жыл бұрын
My bro can you share the link for the conversation kit pls my bro
@hunterweston3259
2 жыл бұрын
Best place to buy all these?
@WrenchChill
2 жыл бұрын
The used factory parts came from Ebay, and the new parts came from O'Reilly or Rock Auto 🤘
@_ZATI_
2 ай бұрын
Can you do this on a 07 2wd?
@WrenchChill
2 ай бұрын
Only if it has torsion bars
@valarmorgulis6504
2 жыл бұрын
What is your opinion, possible to install upper control arm from colorado to hummer h3 ?
@WrenchChill
2 жыл бұрын
It will bolt to the frame, but it won't work with the h3 spindle and it's shorter. Why would you want to put a Colorado upper control arm on an H3?
@valarmorgulis6504
2 жыл бұрын
@@WrenchChill i think that arm from colorado more reliable. And possible to change only ball joint.
@stevencarnes7790
2 жыл бұрын
I have a question so Im building a 2012 Colorado 4x4 5.3L V8. Should I use the 2010 h3t hummer upper,lower control arms and parts that would fit the 5.3L hummer to accommodate the extra weight from the engine?
@WrenchChill
2 жыл бұрын
No they are all the same as far as the donations parts go that you would use. Just get them from any version of the H3 that you can find
@stevencarnes7790
2 жыл бұрын
@@WrenchChill Thank you for the info. I have to get the engine and transmission rebuilt first. I hope the stock ecu can be reprogrammed if I decide to upgrade the stock 5.3
@supergirl109
Жыл бұрын
a 2012, nice! got a 2012 Colorado too!!
@kennyboi01
Жыл бұрын
How much do you want for that Colorado?
@stevencarnes7790
Жыл бұрын
@@kennyboi01 Not for sale that's my dream truck and its going to be awesome when I'm done in 5 years 😂
@lelson5176
2 жыл бұрын
Any issues with the ABS after splicing the wires?
@WrenchChill
2 жыл бұрын
Nope!
@littledutchboy3531
6 ай бұрын
What’re the fox shock part numbers front and rear
@dustinadams877
Жыл бұрын
Does this work for the canyon?
@WrenchChill
Жыл бұрын
Yep!
@_donpowers
Жыл бұрын
Will the 15”s still fit?
@WrenchChill
Жыл бұрын
I think 16" is the minimum wheel size that will fit
@derekreilly1039
Жыл бұрын
We're the shocks for an h3 or colorado?
@WrenchChill
Жыл бұрын
H3
@WrenchChill
Жыл бұрын
On the front
@derekreilly1039
Жыл бұрын
@@WrenchChill thankyou!! That's a sweet build..so the fox show are for an h3 so regular h3 show will work in place of the stock along with the other parts
@355offroad7
2 жыл бұрын
Hey I’ve been thinking of doing this for a while. Already swapped the rear end from an h3 so now I want to do the front Do you think this would work with the existing 4” tuff country lift for the Colorado with out having to find the equivalent 4” lift h3 steering knuckles? I’m concerned that lowered control arm mount would mess up geometry. Thanks
@WrenchChill
2 жыл бұрын
Unfortunately that won't work. Can't use a 4" lift without the H3 knuckles unless you do a lot more custom stuff
@355offroad7
2 жыл бұрын
I figured that might be the case, thanks for the reply!
@OscarRodriguez-uc8mh
2 жыл бұрын
Will this work on a 2wd Z71?
@WrenchChill
2 жыл бұрын
Yes it will
@OscarRodriguez-uc8mh
2 жыл бұрын
@@WrenchChill Thanks for the reply. Just wondering if not having the axle nut on the spindle would cause an issue?
@WrenchChill
2 жыл бұрын
@@OscarRodriguez-uc8mh it might be a good idea to run a large bolt and nut through the hubs to take the place of a cv axle just to be safe.
@OscarRodriguez-uc8mh
2 жыл бұрын
@@WrenchChill just bought all the parts for the swap I plan to leave the axle stub and nut on there since I got axles for cheap. Now I’m wondering if some 2wd Silverado hubs will work with the h3 knuckle. Thanks for your help
@zeriqr7098
2 жыл бұрын
@@OscarRodriguez-uc8mh did you get your 2wd z71 all figured out? Would love to do this on mine
@valarmorgulis6504
2 жыл бұрын
And i need your help , please answer one qwestion. I'm trying to find new door w'strip 25931888 for hummer h3 , but wuthout sucsess. I think , that w'strip 19210208 from colorado absolutly same shape. Can you check ?) Thanks.
Пікірлер: 101