Liked the video? Help us make more at www.patreon.com/SmartIrrigation
@iixmattyboy3791
4 ай бұрын
First time irrigation installer, couldn’t for the life of me figure out how to get the water flowing the right direction. This video helped BIG time as I didn’t realise you could rotate the pop up section. Thank you!
@SmartIrrigation1
4 ай бұрын
Great to hear!
@donwheeler1683
10 ай бұрын
Finally after 10 years of occasional use, I'm repairing and upgrading my Hunter spray nozzles, so this video was really helpful for me. Recently purchased quite a variety of underground riser parts and nozzles for the unknown and damage caused by moles and their tunneling along the patios and underground piping. Now I feel comfortable in getting a bit wet knowing how to adjust this efficient irrigation system.
@SmartIrrigation1
10 ай бұрын
Glad to hear the video helped!! Good luck!!
@mojepokoje_real_estate
Жыл бұрын
This is great, your explanation with drawings is the best on YT. Thank you!
@SmartIrrigation1
Жыл бұрын
Thank you very much!
@michaelschwartz9485
Жыл бұрын
Chris, you should make videos about EVERYTHING! Your humor chills me out when messing around with my sprinklers. Another great video, thank you!
@SmartIrrigation1
Жыл бұрын
Thanks Michael! Glad the videos helpful! Haha I wonder what topic I should tackle next then?!
@TherapeuticConnection
5 ай бұрын
Best video on Hunter adjustments by far!!!
@SmartIrrigation1
4 ай бұрын
Wow, thanks for the kind words! Glad you enjoyed it!
@robertmclellan3541
11 күн бұрын
Great explaining how to adjust the MP 1000. Thanks so much. Now I am headed out to adjust my nozzles!
@juanlemos80
Жыл бұрын
Thank you! Great tutorial!
@SmartIrrigation1
Жыл бұрын
You are most welcome!
@ixus9020
Жыл бұрын
Very good description!
@SmartIrrigation1
Жыл бұрын
Thank you! Cheers!
@williammiller4786
7 ай бұрын
Good explanation. Thank you!
@SmartIrrigation1
7 ай бұрын
You are welcome! Glad it was helpful!
@qwertyebable
Жыл бұрын
Thank you, kind sir.
@SmartIrrigation1
Жыл бұрын
You are most welcome!!
@fuidiehockn4599
Жыл бұрын
thanks!
@SmartIrrigation1
Жыл бұрын
You bet!
@arvydasbudvytis1080
Жыл бұрын
Chris, very valuable information. Thank you for the story!
@SmartIrrigation1
Жыл бұрын
My pleasure!
@Robert-gg2vk
17 күн бұрын
Great video. Just one thing. When I was adjusting distance it changed my right stop too I think. Do I need to hold nozzle when adjusting screw for distance? You do in the video but did not mention it so I am not sure whether it is necessary.
@romaindappe4139
3 ай бұрын
The last attempt at adjusting wasn't worth getting wet. Now i know ill get wet while actually getting something done. Thanks
@SmartIrrigation1
3 ай бұрын
Haha, thanks and I'm glad you'll now be prepared for the adjustments once the water comes on!
@LOX311
Ай бұрын
Thanks Sir
@SmartIrrigation1
Ай бұрын
You are certainly most welcome sir!
@mamihorie926
15 күн бұрын
Thank you for the useful instructions! I have a question for you. When I wanted to decrease the radius by using the orange tool (and tried the flat head screwdriver) it didn’t seem to reduce the radius. When it reaches the maximum of 25% reduction, does the screw stop turning when I turned it to clockwise?
@mojepokoje_real_estate
Жыл бұрын
Have a question, when setting a left stop position, can I turn/operate with MP rotator both sides?
@SmartIrrigation1
Жыл бұрын
Yes, when setting the left stop, you can turn the riser/stem in either direction until the left stop us where you want it. Then you can use the dial silver ring to adjust the right stop
@marcusl594
Ай бұрын
What are the color tops indicating on the sprinkler heads? Is it just psi flow allowed and art ankle?
@SmartIrrigation1
Ай бұрын
Each color on the top shows the radius (distance) the spray is designed to shoot. You can check out our article on spray nozzle selection on smartirrigation.com for a run down of the different colors and distances
@ryanhulsey3460
27 күн бұрын
The contractor that built my house just used the regular black spray bodies for the MP rotators instead of the one with the gray head for 40 PSI. What is the PSI for this head? Will changing to the right body make my stream spray further?
@SmartIrrigation1
25 күн бұрын
The regular black heads aren't pressure regulated, so the pressure is just what your system happens to have (many many factors affect this). With the black being unregulated, that would mean if your system had 50+ psi, your rotators might actually spray further with the black head rather than the grey head. Changing to a 40PRS head will reduce the distance if your system has pressure over 40 psi, or won't change the pressure if your system already is running at or below 40 psi. Hopefully that helps
@alessiotius283
11 ай бұрын
Hi I have both the MP rotator 3000 and MP 2000, but I notice that the radius of the MP 2000 is not up to spec. I use them at 3 Bar and they should do 6.1 meters but they don't even reach 5 meters I don't have this problem with the 3000 series. I don't understand what it could be?
@SmartIrrigation1
11 ай бұрын
Hmmmm that's strange. It could be that the 2000s are turned down with the adjustment screw at the top. Also, you could build a guage system to measure dynamic pressure (pressure with flow coming out of rotators) at the spray head to make sure the pressure there is 40 psi. Otherwise, there might be more complicated trouble shooting needed. Check out our patreon if you are interested in supporting us and more in depth levels of help! www.patreon.com/SmartIrrigation
@alessiotius283
11 ай бұрын
@@SmartIrrigation1 Thanks for the reply. I already did the tests and I'm at almost 50 psi. The only thing that comes to my mind is that having put them in a line of 4 sprinklers I wouldn't want the pump inverter to struggle to keep the pressure constant for a small flow rate (about 13 litres/minute) in fact the motor modulates a lot .
@SmartIrrigation1
11 ай бұрын
Since the 3000s use a lot more water than the 2000s, if the 3000s work at specd distances it is likely an issue with the 200p heads themselves
@inspektor.
Жыл бұрын
Perfect!
@SmartIrrigation1
Жыл бұрын
Thanks! Glad you liked it!
@ZekeMagnum
10 ай бұрын
How many mp3000 210-270 do you think i can run with 74 PSI? 3 maybe 4?
@SmartIrrigation1
10 ай бұрын
How many will mostly be based on how much flow you can support at 40 dynamic psi. On a 3/4 line, I'd say probably 3-4 but hard to know without being there
Пікірлер: 48