The blind is easy to put up and take down. kzitem.infoUgkxvlQxmcZQzSQSYbJsEgAGvG2DaduKTV99 As a female hunter, the ease of placing and setting up the blind is a plus. It’s more of a wind barrier than a warm quilted blind. Which makes it a lot lighter than our quilted blind. I enjoyed the larger windows/openings. Made for a successful season. It has held up well for the first season and the stitching looks good.
@mountainbuck
Жыл бұрын
Hey thanks for watching! It’s definitely only big enough for one person (and not a big person)
@bryanmcpherson3576
6 ай бұрын
Had mine for over 5 years and still going strong
@mountainbuck
6 ай бұрын
That’s awesome! Thanks for the feedback👍🏻👍🏻👍🏻
@dana44169
Жыл бұрын
What a great job,it just shows what you can do with a little plan,preparation,and a purpose in mind.Really enjoy watching your videos,looking forward to the next one
@mountainbuck
Жыл бұрын
Thanks so much Southern Preacher! I appreciate the support 👍🏻
@kevinburgess6112
3 жыл бұрын
video quality is more the sufficient, thanks for sharing your great idea
@mountainbuck
3 жыл бұрын
Hey Kevin, thanks for the positive feedback! Much appreciated!
@davidthompson1529
3 жыл бұрын
I did the exact same thing w the plumbing on a hard side blind last yr. That is a great shack! Well done. Good luck this season.
@mountainbuck
3 жыл бұрын
Hey David, thanks for the positive feedback! The plumbing really comes in handy haha. I recently made a new blind out of a 1,000 gallon water tank and I’m loving it. Best of luck to you as well this season 👍🏻
@awbernardy
3 жыл бұрын
That is a AWSOME set up you made with a little $$$$ I just might have to make one of these too
@mountainbuck
3 жыл бұрын
Hey Adam, thanks so much and thanks for checking out my channel!!!
@campbellmarty36
2 жыл бұрын
Well .... post Covid.... these little jewels in my area are now fetching in $100 a PIECE range!☝️🙄... that $200 will go a LONG way on new supplies!!!. Maybe I’ll get luck and find some cheaper!!!. Great idea indeed ☝️👍👍!!
@mountainbuck
2 жыл бұрын
Hey Campbell73, thanks for checking out my channel! Holy smokes! At those prices you’re better off building one of these: kzitem.info/news/bejne/yICVmoeoaXmVo3Y - a much easier build and much more room. Best of luck this season 👍🏻
@papawed489
3 жыл бұрын
Nice setup. May have to still your pool noodle idea.👍👍👊
@mountainbuck
3 жыл бұрын
Thanks for checking out my channel papaw Ed! Steal away! 😬
@reaping_rager5231
2 жыл бұрын
this is by far the best set up for little cost good job man. youve given me a few good ideas for my next stand, keep up the great work and happy hunting\
@mountainbuck
2 жыл бұрын
Hey thanks so much, Reaping_Rager. I appreciate the positive feedback! Here are a couple more of my blind builds if you are interested kzitem.info/news/bejne/yICVmoeoaXmVo3Y kzitem.info/news/bejne/0puBt2SKpaeehYo
@OffTheGridAdventures
3 жыл бұрын
That a great idea! Thanks for sharing!
@mountainbuck
3 жыл бұрын
Hey Off the Grid Adventures! Thanks for checking out my channel!
@isaacwalton7283
3 жыл бұрын
I got a couple stands like this. We stacked 3 of the metal outside of them and on the top one I used the plastic piece for the blind
@mountainbuck
3 жыл бұрын
Nice! That’s interesting!
@maxfriedenberger8043
2 жыл бұрын
another awesome idea
@mountainbuck
2 жыл бұрын
Thanks again!
@tonydize3944
3 жыл бұрын
Nice i like the urinating thing i would use something like that
@mountainbuck
3 жыл бұрын
Hey thanks Tony! I appreciate it!
@TheSkinking
3 жыл бұрын
I made one 5 years ago. i used it every year. but up here in Saskatchewan it gets really cold, so you have to run a heater constantly in there, and just a tiny window to hold your heat. Then i found it sweated and dripped on you, needed to put insulation on top and box it in. The worst though is that it is cramped and hard to spend 5-6 hours in
@mountainbuck
3 жыл бұрын
Hey TheSkinKing, thanks for checking out my channel! Yeah, these things definitely don't offer a lot of room! That's interesting that you've insulated it further (I put some spray insulation in any cracks and connections). I bet it helps in that super cold up north!!!
@billy19461
3 жыл бұрын
Love it!
@mountainbuck
3 жыл бұрын
Thanks billy19461! Appreciate the feedback!👍🏻
@btwarner2124
3 жыл бұрын
Very cool man.
@mountainbuck
3 жыл бұрын
Thanks BT! Appreciate the feedback!
@edwfd356
4 жыл бұрын
I’m gonna get a porta John thanks for the idea
@mountainbuck
4 жыл бұрын
Hey Eddie, thanks for checking out the channel! I thought of that too! Great idea!!! 👍🏻
@shandonmeadows8620
3 жыл бұрын
Might just be the best idea yet! Being able to sit in my office, and take out a deer at the same time?! Count me in!
@foryourentertainment1109
Жыл бұрын
Great job.
@mountainbuck
Жыл бұрын
Thanks so much! I appreciate it 💪🏻
@foryourentertainment1109
Жыл бұрын
@@mountainbuck I have been thinking about doing this. Lucky me, I found your video. Once again, awesome job.
@mountainbuck
Жыл бұрын
I have a more detailed version in case you are interested. Thanks again👍🏻
@rubenrenegado3355
3 жыл бұрын
Nice job man 👍
@mountainbuck
3 жыл бұрын
Thanks, Ruben! Much appreciated 👍🏻
@raymondhoagland4976
3 жыл бұрын
Love it, Great job !!!
@mountainbuck
3 жыл бұрын
Hey thanks Raymond! I appreciate it!!
@HangImHigh
2 жыл бұрын
How many cans of paint ? And also did you paint the inside?
@mountainbuck
2 жыл бұрын
Hey David! Thanks for checking out my channel. I believe I used a total of five cans or so for this build and yes, I painted the inside black👍🏻
@HangImHigh
2 жыл бұрын
@@mountainbuck nice thanks i’m getting started on mine this week
@mountainbuck
2 жыл бұрын
@@HangImHigh That's awesome man! Here is a full build video that might help kzitem.info/news/bejne/0puBt2SKpaeehYo Best of luck!!!
@A.C.71
3 жыл бұрын
Great idea. May I suggest hooking the end of the urinal pipe to a container and seal the connection..when you leave the stand take the container with you, you don't really want to put your human piss scent around your deer stand.
@mountainbuck
3 жыл бұрын
Thanks for the feedback 👍🏻
@colequick6136
2 жыл бұрын
Could you do or show a video on how the door was made and framed?
@mountainbuck
2 жыл бұрын
Hey Cole, thanks for checking out my channel! I’d have to take some video in November as the stand is around 5 hours away. I basically cut the plywood to fit and installed hinges in the aluminum frame and door (then added the sliders for the window)
@hunter69707
3 жыл бұрын
Nice!
@mountainbuck
3 жыл бұрын
Thanks Clark! Also, thanks for checking out my channel!
@twinsoutdoors2247
4 жыл бұрын
Awesome!
@mountainbuck
4 жыл бұрын
Thanks guys!
@dereckbeaupre
3 күн бұрын
Can these be build with out the metal cage? And why do u need the cage?
@mountainbuck
2 күн бұрын
Hey thanks for watching! I’m not sure it would hold up so well without the metal. If you wanted just plastic, I’d go with a bigger water tank and cut windows and a door out of it (I have a couple videos on that design as well).
@carfvallrightsreservedwith6649
Жыл бұрын
The cage can be unscrewed from the base negating the need to cut it.
@mountainbuck
Жыл бұрын
Thanks for the heads up! I appreciate you watching and for the info👍🏻
@flushot6513
8 ай бұрын
Lol awesome
@mountainbuck
8 ай бұрын
Haha thanks man👍🏻
@mountainbuck
3 жыл бұрын
- Check out the IBC Tote Hunting Blind full build video: kzitem.info/news/bejne/0puBt2SKpaeehYo - Also be sure to watch the Water Tank Hunting Blind build here: kzitem.info/news/bejne/yICVmoeoaXmVo3Y
@nathanrasbaugh7873
3 жыл бұрын
5:15 - Where did you get the pieces of molding for the window? Where could I purchase something like that?
@mountainbuck
3 жыл бұрын
Hey Nathan, thanks for checking out my channel! Hook me up and hit subscribe, if you could! I got the molding for the plexiglass window from Home Depot. Here is a link to product: www.homedepot.com/p/Stabilit-855-1-4-in-x-1-3-8-in-x-96-in-PVC-Composite-White-FRP-Divider-Moulding-10002-ZW096CB/205347156
@stevenhallo3629
3 жыл бұрын
Did you cut the top off both of the plastic part of the totes
@mountainbuck
3 жыл бұрын
Hey Steven, thanks for checking out my channel! Hook me up and hit subscribe if you could! Check out minute 1:10 of the video. This shows how I cut both totes. I cut the bottom plastic on one tote and the top plastic on the other. I kept the valve for the bottom, so I could run the piping to the ground and kept the top screw piece as the very top of the blind.
@michaelkay3945
3 жыл бұрын
Where did you get your molding for the plexiglass?
@mountainbuck
3 жыл бұрын
Hey Michael, thanks for checking out my channel! Hook me up and hit subscribe, if you could. I was walking through the moulding aisle at Home Depot and found something that I thought would work. It was something like this (maybe even this exact item): www.homedepot.com/p/Stabilit-855-1-4-in-x-1-3-8-in-x-96-in-PVC-Composite-White-FRP-Divider-Moulding-10002-ZW096CB/205347156
@hunterhorton3492
10 ай бұрын
How much room do you have to move around
@mountainbuck
10 ай бұрын
Not much room at all. If you’re a bigger dude, it probably won’t work for you.
Пікірлер: 72