We bought a V6 that had one and it always rattled ever since we had it (ever since 2012). When reaching any speed above 60 MPH, it would just start rattling really loud and had to keep grabbing the shifter to stop the noise. Turns out it was super loose, didn't have the rubbers behind the bolts. Did a quick fix with some rubber and tightened both bolts real good. If only I knew it was this easy to fix. Thank you so much.
@its8bpm554
Жыл бұрын
Put some loctite because the bolts get loose over time from vibrations
@adammortezof2591
2 жыл бұрын
I had a hell of a time getting that front bolt lined up with the Barton. Well worth the time spent! Day and night difference. Great Job!
@FloydLarck
2 жыл бұрын
Excellent video, just ordered one for my wife's '08 and this gave some good pointers. I liked how you omitted the tedious parts, sometimes people show every second of trying to work something into place. Your son's camera work was good too.
@simcoecountygearheads
2 жыл бұрын
Thanks!!
@FloydLarck
2 жыл бұрын
@@simcoecountygearheads Whoo! as Ric Flair would say. Put the car up on jackstands and did after watching your video. Shifter went in easy as pie and made a tremendous difference over the factory shifter. Thanks!
@TratzPatratz
2 жыл бұрын
Came looking for this since my 2005 GT (same seats. Nice!) shifter has been slop. Excellent video. Thanks.
@chidrole
3 жыл бұрын
Your son did an excellent job as a cameraman! 👍🇨🇦
@sweetassugar2076
3 жыл бұрын
Nice job ! That bad Larry shifts on a dime now good job filming 👍🔥
@larrybenthall2325
3 жыл бұрын
Awesome job! The shifter looks great. I hope the shifter solved your shifting issues, it looks very comfortable in the car...
@79beans347
3 жыл бұрын
Shifter looks good , I like a short throw shifter, I put one in my t5 that I put in the pinto and I have it adjusted all the way down as short as it will go , so now I can: shift with the flick of the wrist 😁🚗💨💨
@79beans347
3 жыл бұрын
Ive still gotta get used to your new name, everytime I see it i think that it is some other channel 😂
@simcoecountygearheads
3 жыл бұрын
😂
@michaelgallant7615
3 жыл бұрын
Looking good ..Why not just get your boy to help you when you need extra hand...He did a great job with the camera...My son also loves the roblox...I dont even bother to ask him for a hand if hes having a serious game of the blox...
@keithbellair9508
Жыл бұрын
These things are always harder than they show becuase they want to sale this junk…. It might have been a bit easier if you took the plastic center console off?
@simcoecountygearheads
Жыл бұрын
Maybe but I didn’t want to do that 😆
@keithbellair9508
Жыл бұрын
@@simcoecountygearheads i know everything is a pain, but that was only 2 screws to take off
@K.Hgarage
2 жыл бұрын
It's hard to tell on the video but it looks like you've got the ball joint backwards, the serrated/grooved section where the shifter handle mounts should face the passenger side
@AndrewBurtonS-group
3 жыл бұрын
wow that shifter is so much better than the OEM one. Im surprised at the difference. I wonder if they make that ring for the boot for a T5... I just have a zip tie holding mine down lol
@alfredulaj3985
2 жыл бұрын
Does this shifter work on the t5 trans
@simcoecountygearheads
2 жыл бұрын
No you would need one for the t5 which hurst makes also.
@NoFox_Given
3 жыл бұрын
I hate working on the ground makes most stuff much harder
@AnythingGasoline
Жыл бұрын
thats still quite a short throw even for a stock shifter!
@Zilxnce
3 жыл бұрын
Are you able to switch the shift knob if you decide to put a new one on it?
@simcoecountygearheads
3 жыл бұрын
Yeah you can change it. Just make sure the thread size is correct on the new knob
@jon8283
3 жыл бұрын
Just finished installing my Hurst shifter last night and wow I must say it's a pain to get in. I ended up dropping trans mount by an inch to get it past. But as a question I can go into each year fine but in neutral it doesn't freely move it just stays wherever I put it (left, right, center) is that normal or are the bolts to tight? Just wasn't sure how yours was since you have same car and shifter.
@simcoecountygearheads
3 жыл бұрын
It should move freely for sure. Double check everything and go from there
@cjthomas7138
2 жыл бұрын
Will this fit v6??
@simcoecountygearheads
2 жыл бұрын
No this is for gt cars only
@K.Hgarage
2 жыл бұрын
They made a V6 version, it's harder to find but they're out there. I'm running one right now
Пікірлер: 30