Yes. Always take care of your tools. Watching this, I realized my tap and die set is now 40 years old. My parents gave it to me for Christmas when I was 18.
@josephfine3394
3 жыл бұрын
I recall the Hurst Super Shifter was spring loaded. The Comp Plus was not. The Super Shifter shift arms were wider, and the mostly straight-line rods had reinforcement sleeves welded on. Super Shifters sat up very high to allow the rods to be straighter. You had to cut a big hole in the floor for clearance. Later on, they sold the Street Super Shifter which was spring loaded, had the good arms, but otherwise was similar to the Comp Plus. Your aluminum shift arms look wonderful but are much too soft. They'll strip right out. Even the original hardened steel arms get worn from racing, causing gear clash and lockup between 2 gears. I wonder if there will be trouble with your soft aluminum shift rods also. Hurst did make a very expensive NASCAR shifter with Heim joints and steel rods. I liked the Mr. Gasket shifter because you could set it up for super short throws out of the box. It was common to already have a butchered floor in an old muscle car anyway, back in the day...haha
@edgonzalez7500
2 жыл бұрын
Love this setup, will you rebuild my Hurst shifter on a Top loader installed in a 1966 Mustang. I particularly like your rods design.
@haroldhprittjr7007
2 жыл бұрын
Killer video the tips are price less I remember my dad teaching me some of those things and if have end mill an lave wow yeah you can really make some nice things I had a super T-10 I have a M-21 for my 327 in 68 swb c10 haven’t got to the shifter yet but your video is very intuitive but if you get under the car and see somthing like what your making it’s very special and you realize how much time and effort was put into it good tips on the lave I ran one for a little bit at a machine shop building mine equipment lave is very useful but dangerous if you don’t know what your doing can’t be careful enough around one love the stand idea also nothing like a good four speed I love them I’m 47 my brother-in-law got me into them great job thanks for sharing it’s nice to see these things
@scarecrowoven9446
3 жыл бұрын
Very well documented thank you for this video. I wish we were neighbors your awsome
@mountainsgarage
3 жыл бұрын
I am always building my dream neighborhood, welcome!
@derekdeckens2559
3 жыл бұрын
What a great video! I am in the middle of trying to get my Mr. Gasket Vertical Gate shifter to work on my Chevelle. The bushing and lever arm slot are worn out and it keeps popping out of 4th. Finding a new lever arm and larger Mr. Gasket bushing are all but impossible... Thanks for posting this!
@mountainsgarage
3 жыл бұрын
Glad to help!
@petermullin5387
4 жыл бұрын
Need one of those for my 833 when I get to my street rod project.
@mikeshaw4462
4 жыл бұрын
If you don’t get an offer to host a motor related TV show there is no justice in this world !
@JohnSmith-qn3ob
3 жыл бұрын
I can't find all of my tape measures, has anyone seen them?
@kittypigeonclueless5566
3 жыл бұрын
Seany, that was beautiful to watch! You got a subscribe from me. Not sure how many videos you have, but I'm gunna start watching. I really, really, really like that straight shifter rod set up you make. The next time someone asks me what I mean when I say "sweet" I'm gunna direct them to this video right here. Also...it's nice to hear what you had to say about the super t-10. I was initially disappointed when I found out my project had one. I was all geared up (see what I did there? These jokes write themselves boys, pay attention) for a muncie. Now I don't know nothing about nothing when it comes to automocars but the more I learn from fellas like you, looks like the super t-10 is a bit of alright. Certainly easier to rebuild than the muncie, looks like. Before I go, I just gotta say, I hope some of your videos show some of those sweet rides you were talkin' 'bout. 'Cause I wouldn't mind a bit to put my eyeballs on them and goggle for a bit.
@mountainsgarage
3 жыл бұрын
Thanks for watching! Lots more videos!
@kittypigeonclueless5566
3 жыл бұрын
@@mountainsgarage Listen, I hate to be a pest, but you mentioned a scattershield. Now, I had never heard of one of those until three days ago, but I did some looking, and like you said, it's nice to keep your feet. I had no idea a clutch or flywheel could do what they do. Anyway, my 75 vette wants one of these things, do you have a recommendation of what and who to buy from?
@mountainsgarage
3 жыл бұрын
@@kittypigeonclueless5566 Lots of Chevy ones around used, I buy them when I find them for $200 or less. They sell new for $4-500, but cheaper than surgery!
@kittypigeonclueless5566
3 жыл бұрын
@@mountainsgarage ok. guunna keep my eyes open for a deal!
@aarvolaredonjunior1032
10 ай бұрын
Wanted to know if the super shifter will work on A-body 76 Duster Is there a way I could get a template from you? I would like to do the same.
@delcole8321
3 жыл бұрын
I have a 67 Camaro with a hurst competition plus shifter it would be great if you offered a kit
@mountainsgarage
3 жыл бұрын
I will work on that! Good idea!
@jodsta0695
3 ай бұрын
How fast can you shift with the hurst comp shifter ?
@wuptedo
4 жыл бұрын
I used to have a Hurst V-Gate in my 65 Mustang Coupe street car (shoe-horned Cleveland and top loader) - I had some of the funnest times with that car. I cant believe those sifters are so pricey now. What size rod-ends are you using?
@mountainsgarage
4 жыл бұрын
wuptedo Its crazy!
@speedfreak1161
4 жыл бұрын
Looks cool 👍🇦🇺
@gregwarner1225
3 жыл бұрын
Can you provide the dimensions for the rods you made, and the source for the end links? Or, do you make and sell them for specific applications? By the way, I love this video. I must have watched it 5 or 6 times already to see if I could make them myself.
@mountainsgarage
3 жыл бұрын
The rod material is 5/8 aluminum from amazon or ebay. The rod ends are 3/8-24 left and right hand. If you search for 4 link they come cheaper in sets of eight on either site. Same with the 1/2” flat bar for the bracket. I started buying old shifters and selling them after last winter, I have a pile of them to do again. Thanks for watching!
@mountainsgarage
3 жыл бұрын
I can measure the length if you tell me your shifter style. For a Muncie or T10 anyway.
@gregwarner1225
3 жыл бұрын
@@mountainsgarage Well, I'm putting in a new Autogear/Muncie M22 (with wide ratio gears) in a '68 Camaro. I have a used Hurst Competition Plus shifter and handle from my '69 Camaro. I just prefer the idea of straight rods to the factory bent rods. Thanks for the details.
@gregwarner1225
3 жыл бұрын
@@mountainsgarage OK, so I purchased and received the rod material and the rod ends. Do you have the lengths you used for the 1-2, 3-4 and R rods? I have measured 12.5", 16.5" and 8" center to center, respectively, on an M-20 with the original rods in place and in neutral. Will the lengths be any different on my Autogear/M22? I think it is similar to a Super T10 since it only has 3 mounting bolts for the shifter bracket. And, do you recommend against using the original shifter levers? Lastly, was it necessary to make your own shifter mounting bracket, or did you do it just because you wanted to?
@donatocantu7738
Жыл бұрын
How long are the 5/8 aluminum rods you order ?
@mountainsgarage
Жыл бұрын
I buy it lengths that are still UPS compatible. Less then 8 ft.
@davidshoemaker4195
3 жыл бұрын
Ok Shawn tried to find other videos but this will do, u called my m23 a rock rusher trans,are there any other cool names for munchies back then, another question,my buddy had a 350 Chevy with 5.11 gears and kept spinning off balancer at high revs and ran 3 grand at 50 , never solved but got rid of car following year, u still da man
@mikef.1000
2 жыл бұрын
The invention of the automatic transmission was a sad day, that's for sure ;-)
Пікірлер: 32