I've just bought a 435 and love it . The anti vibration is excellent, when I think back to when I started with a danarm 110 and how my hands would tingle for days with no anti vibration it's a whole different world now 😊
@MrRealtorJim
4 жыл бұрын
I have this model and love it. Very reliable. I also had another brand chainsaw before this one that was temperamental. My wife surprised me with this Husqvarna 435 and I tell her from time-to-time that she made an excellent choice.
@jjohnson2553
Жыл бұрын
I have a 435 but If it has any sort of decompression device on it, then it doesn't appear to work as this thing is extremely hard to pull considering it's size. I had a much larger Husky saw prior to this one and it was much easier to pull even though it was about twice the size.
@tristinstorm5858
Жыл бұрын
Hi Jim my brother bought me a 435 a few years back it was my first brand new chainsaw so I babied the hell out of it cleaned it after every use regular maintenance and one day oh about 6 months after I got it I was running it just fine I shut it down and havent been able to get it running since. I pulled the cord until I broke it put in a new one and broke that one to. I got a carb rebuild kit changed everything out made sure the jets were clean checked hoses they were fine bought new spark plug air filter put it all back together and pulled the damn cord on that thing until i wore it down and broke it again. So I put it on the shelf and left without hurtling the damn thing at a tree. So finally I said screw it and ordered a brand new carburetor hoses the works and put it all in and still nothing, when i pulled the plug it was dry as a bone, i cant even get it to start with starting fluid and it doesn't seem like fuel is getting to the chamber, when I push the primer bulb it fills with gas but then its like theres a clog on the line because after 3 pumps the bulb gets really hard to pump and gas starts squirting out from behind the bulb if i try and push it. So i tore it all again and manually inspected the lines blew air threw them and the carb and they were fine, put it back together and the same thing no gas to the chamber. Im at my witts end here and if i pull that damn cord one more time im going to lose it and take a sledgehammer to it.
@cowichecanyonranch
3 жыл бұрын
I’ve put and 18 inch on my runs well?
@floriceeel
8 жыл бұрын
i've been using this little saw for the last 6 years with a 13" bar as an only saw.I did a muffler mod and it runs perfect ,it's light and easy to start.The only problem I had was a loose oil pump pin which I fixed it easily.They seem to be better built than the 340/345/350 series with no loose bolts coming off.
@MemphisMojo15s
7 жыл бұрын
floriceeel what do you mean a loose pin?
@floriceeel
7 жыл бұрын
the oil pump assembly has a pin mounted in the crankcase.mine fell off and the pump stopped pushing oil.
@MemphisMojo15s
7 жыл бұрын
floriceeel ok, thanks. mine has been stingy on oil. I cleaned everything out and mixed 5W30 synthetic oil in with my bar oil, changed the bar, and now mine seems to be oiling just fine. I was worried it was the oil pump but now it's fine. my pin seems ok too. thanks again
@johnkomosa4089
4 жыл бұрын
Hi, what muffler mod did you do? I am refurbishing a used saw.
@Scott.Farkus
7 жыл бұрын
Good video. I just bought the 435, nice to know it's a step above a homeowner saw. Haven't used it yet, but it starts easily and runs well, seems like a good saw.
@markschlemmer3633
6 жыл бұрын
Ken Quesenberry n by
@denisgamache4642
8 жыл бұрын
Tanks a lot !!! I just bought one based on your infos. I took an Oregon Pro Lite 15" bar and Oregon chain with it. So far I'm realy pleased with it. It's exactly the cainsaw I needed.
@josephsilvajr.6185
3 жыл бұрын
I have a Husqvarna model 435 chain saw that is hard to pull the starter cord. It feels like that the timing is advance. The spark is going off before the piston gets into position. I was wondering could I have a damage flywheel assembly. Could it move enough? It seems to me if the pin bent a little that it could only be a few degrees. Would this be enough to mess up the timing to make it hard to pull the starter cord?
@Gorlami90
3 жыл бұрын
I remember my first year doing full time lawn care/landscaping my hands would be shaking all night
@1208bronco
4 жыл бұрын
This there a heat barrier in the saw , unlike my older Husqvarna 235 it starts to not run right when it heats up.The fuel starts to turn to vapor before the carb. There should be some kind of heat shield between the carb andfuel lines. Wondering if there is one or do I have to make one myself ? Any answers would be helpful.
@schneider1492
3 жыл бұрын
What do i do if my buddy stripped out the screws that hold the recoil starter on?
@Ducktruckful
4 жыл бұрын
Does this have the 66 DL chain? what would be the advantage of 450 if you wanted to stay with 16" bar?
@joesjunkgarage
11 ай бұрын
Excellent project knowledge video!
@gav12784
3 жыл бұрын
Mine doesn't idle and is a nightmare to start, especially after a stall!
@ChrisJones-vd2cl
4 жыл бұрын
I’m just wondering how to adjust the idle.
@moparfreak77
4 жыл бұрын
the idle screw
@tvs3497
3 жыл бұрын
I'm trying to repair the trigger that broke when my knee landed on it. That plastic is hard, but not as hard as my knee.
@ChadRevels
4 жыл бұрын
Do you have a video on idea adjusting?
@3232myke
6 жыл бұрын
When I bought the new chain it was a 16" chain but when I put it on its too long it doesn't fit n its the one that is for the 435
@steppoffaith8426
5 жыл бұрын
It should be 66 links.
@TitoTellsTheTruth
2 жыл бұрын
Why can’t I get the cover back on? The metal band doesnt want to fit over the metal wheel
@davidhoward9986
2 жыл бұрын
It could be the break is on I just watched a video on that
@caryg4810
Ай бұрын
it took me 10mins of frustration to understand the break release allowing it to pop right off...
@3232myke
6 жыл бұрын
So I have a 435 Husqvarna this same model I bought a new chain bit its too long n the chain says 16" so why doesn't it fit?
@mica122213
5 жыл бұрын
dunno
@trwilkinson4623
3 жыл бұрын
Count the original chain, number of drive links. Sometimes different bars need more / less drivers to fit / adjust correctly. Make sure right pitch / gauge of chain.
@3232myke
3 жыл бұрын
@@trwilkinson4623 thanks for reply but , Ive had that fixed since , it was lowes fault they gave me wrong chain ⛓️
@brandonbullock831
5 жыл бұрын
How do I rewind spring on husqvarna 435
@WarlockCore
5 жыл бұрын
I know this is an old vid, anyhow I have that same model for some reason I cannot get it to start this year, I changed the spark plug, filled it with fresh fluids, but nothing won't even turn over, any ideas what I should look for?
@JohnDoeEagle1
5 жыл бұрын
I would start with the carb first. If you weren't using the premixed ethanol free fuel in it and used it a lot you probably tore up the gaskets and or diaphragms. You can get a rebuild kit for it (less than $15) or just junk it or get a new carb for under $40.
@WarlockCore
5 жыл бұрын
@@JohnDoeEagle1 hey thanks , I'll look into that 👍😎
@bushcraft_guy_
5 жыл бұрын
Can I put a bigger bar on this model?
@mica122213
5 жыл бұрын
yes
@johnkomosa4089
4 жыл бұрын
I think this saw could use a 20" bat if you knew what you were doing? Did you go bigger? And if so how did it do? I'm at 16"
@richardschaffling9882
3 жыл бұрын
I have a 435 and it shuts off when you let off the gas and the dealers we have two are not worth a diddly
@pork4U
3 жыл бұрын
Dude!!! You were doing such a great job showing it off! How about some PREVENTATIVE MAINTENANCE PROCEDURES that's what I'm looking for, as mine right our of the box is finicky and I'm not terribly impressed with how I must keep screwing with stuff
@jimmynichols1795
3 жыл бұрын
My saw chokes when revving
@TimKollat
9 жыл бұрын
Husqvarna 435 or Echo CS-352....which one should I buy
@chrisbrug7924
7 жыл бұрын
not ECHO
@Scott.Farkus
7 жыл бұрын
The Echo looks very similar to the Husqvarna, but Echo is heavier, partly why I bought the Husqvarna. I've also heard a lot of good things about Husqy saws, so I was leaning that way to start with.
@mica122213
5 жыл бұрын
435 i been cutting the hell out of trees with it.. amazing.
@tristinstorm5858
Жыл бұрын
Well what a waste of fking time asking a question as all of the questions are yet to be answered.
@wesragnar5372
3 жыл бұрын
No oil adjuster an oik everywhere first time use. Dont like it
@williamsidis5489
2 жыл бұрын
Yeah doesn't oil enough for sure .
@erwinraffetseder4541
2 жыл бұрын
Same here. Not oiling at all
@arockin55
Жыл бұрын
Not impressed and Husqvarna Tec support, NOT GOOD. Owned 5 saw over 40 years, so I do know something about saws. The manual shows you to grease, oil the clutch needle bearing by turning it on its side and dripping oil around the shaft with the clutch installed? Got ahold of Tec support asking them about this, even the Tec guy was not sure, and sent me the videos on how to adjust the chain and grease the bar sprocket! Nothing about the needle bearing, Tried putting a pin in the center shaft to see in this is a grease port, but seems to be solid. Also the saw is very touchy on the chain adjustment, no oiler adjustment, cheap carbutator, not a good saw in my mind, no wonder you can pick them up all day long on eBay re built.
Пікірлер: 54