Runs well. Looks like your chain was perfect! I've never ran a 543, picked up another ported 241 a couple months ago, probably going to sell my modded 242xp. Have a great weekend.
@poparamiro
Жыл бұрын
Thanks! Runs well and it is light... All the best!
@vladionut3079
Жыл бұрын
Un rezultat super bun,atât la sunet cât și la taiere! Numai bine Ram🤝🤝
@poparamiro
Жыл бұрын
Bine spus, toate cele bune!
@adrianlupu3316
Жыл бұрын
Foarte bun clip, o treabă super faină ai făcut cu acest Muffler Mods 👍. Drujba a dat rezultat excelent 💪. Spor la toate🤝🤝🤝
@poparamiro
Жыл бұрын
Mulțumesc pentru vizionare si comentariu! Toate cele bune!
@daig1984
Жыл бұрын
Much better
@poparamiro
Жыл бұрын
Thanks for watching!
@EugenTechTips
Жыл бұрын
Super fain a iesit mestere! Pai cum sa lucram cu scule stock! :D:D:D
@poparamiro
Жыл бұрын
Multumesc! Adevarat ===))) :D
Жыл бұрын
Fain rezultatul de la final.😮 Cred că e una din cele mai spurcate tobe. Dar după mm se vede considerabil nervozitatea ei. Mișto tăieri, te salut.
@poparamiro
Жыл бұрын
Urata toba, nu mai vreau alta 🤣🤣 Noroc ca a iesit bine.. Salutare si toate cele bune!
@rommelgsp1
5 ай бұрын
Do you notice bar oil leakimg from the bar nut area on the outside of the cover when running the chainsaw? Thank you.
@Memry-Man
Ай бұрын
So to be clear you justf remove the spark arrestor and drill through to the bottom? Definitely been considering this course of action, you have convinced me
@poparamiro
Ай бұрын
Yes, be carefull to clean all debris...
@Memry-Man
Ай бұрын
@@poparamiro yes compressor on stand by 👍
@Memry-Man
Ай бұрын
@@poparamiro OK! that was amazing! Super super easy task! My saw can breath now! Running and cutting better then ever!
@gabrielemangiavacchi
7 ай бұрын
Hello and congratulations on the change😊 With the subsequent carburetion as you adjusted, did you leave the original carburetor?
@poparamiro
7 ай бұрын
Hi! Yes, original carb... Thanks for watching!
@mihaiileana5373
Жыл бұрын
Salutare! După modificarea unei tobe trebuie neapărat și alt reglaj?
@poparamiro
Жыл бұрын
Salut! Da...
@shaun4bigblocks993
Ай бұрын
I am thinking maybe that is a non-EPA saw and with out a catalytic converter. I wonder what country he is in. All of these saw videos and nobody ever shows the serial tag for reference. I can get an EPA version for US 125 but after some reading I heard it is not a true Husqvarna by design, but rather labled Husqvarna.
@adrianstefan23
Жыл бұрын
👍👍👌👌
@poparamiro
Жыл бұрын
🤝🤝🤝
@christianlonnberg7975
8 ай бұрын
Can you help with 543xp muffler mod? U remove the baffle, drill a hole trough the muffler? But not trough the whole thing? Do you weld the baffle back on?
@poparamiro
8 ай бұрын
Remove the deflector and make a big hole through the all layers Braze a new deflector
@matteoraab1484
6 ай бұрын
Hello, how is the fuel consumption now with the muffler mod? Does it burn more fuel?
@poparamiro
6 ай бұрын
Hi! A little more, yes... Thanks for watching!
@eugenopincariu3229
Жыл бұрын
Super👍🏻👍🏻👍🏻👍🏻👍🏻💯
@poparamiro
Жыл бұрын
Mulțumesc pentru vizionare si comentariu!
@gabrielstroemer4690
20 күн бұрын
my won’t fire up after this what should i do
@poparamiro
19 күн бұрын
Check the spark...
@garengtutorial8923
Жыл бұрын
👍👍👍 bagus
@poparamiro
Жыл бұрын
Thanks for watching!
@iliecirciu1251
Жыл бұрын
👍👍👍🤝🤝
@poparamiro
Жыл бұрын
🤝🤝🤝
@crazyfeller5704
Жыл бұрын
👍
@poparamiro
Жыл бұрын
🤝🤝🤝
@francopoggi7579
8 ай бұрын
It is to much noise now whit the exaust open?
@poparamiro
8 ай бұрын
No, due to big deflector installed... Thanks for watching!
@alexandrupuiu1985
Жыл бұрын
Destul de vizibilă diferența după MM! Enervantă tobă, "strato"
@poparamiro
Жыл бұрын
Foarte greu de facut, dar a meritat efortul... 🤝🤝🤝
@antochibogdan7090
Жыл бұрын
Cool 🫡
@poparamiro
Жыл бұрын
🤝🤝🤝
@oscaradrenalina1
Жыл бұрын
Ta pila bez tej modyfikacji kreci sie na 14000. Niczego nie osiągnołeś
Пікірлер: 48