This is a 2012 residential Husqvarna RZ5424 with a Kawasaki 24hp engine and 54 inch cutting deck. It has been a fairly decent mower over the years as I've made sure to keep up on yearly maintenance to give me trouble-free service - things like keeping up with oil changes, greasing zerk fittings, air in tires etc. A couple of quips I have include the tires and the seat. The tires are good for mostly flat surfaces but go downhill fast (literally and figuratively) when going around a slope sideways and if there is any moisture present on the grass. This is not an issue of old tires or something that developed over time - this has happened from the time when the mower was new. The issue with the seat is that it's from the bargain bin and it could use a taller back and some armrests. I cut about 1.25 acres with this mower.
Something I'll be repairing in this video is adjusting the neutral control. The neutral control keeps the mower from slowly creeping when levers are in the neutral position. If your mower creeps in neutral, the neutral control needs to be adjusted, and I'll show you how it can be done on your Husqvarna RZ5424.
How to adjust the Neutral Control on your Husqvarna RZ5424
1. Jack mower rear end.
2. Take off wheel.
3. Take off linkage.
4. Loosen adjustment screw.
5. Start mower.
6. Rotate nuetral control bracket adjustment until there is no rotation.
7.Tighten adjustment screw.
Негізгі бет Husqvarna RZ5424 Review, Maintenance Tips, Neutral Control Issues, and Nuetral Adjustment
Пікірлер: 50