The leveling jacks on my 2000 Winnebago needed to be replaced due to slow return when retracting the jacks. I purchased the springs directly from HWH Corporation website.
I’ve seen several videos that used cut up paint stir sticks... so I tried this with much frustration and gave up. I made a pry bar with a sliding hook and threaded rod... so much easier. The pry bar is a 1-inch steel tube, with a 1-1/4” tube that slides over the outside of the 1” tube. This tube has hooks on each side because each jack has two springs... one on each side. Lastly I drilled a 9/16” hole and inserted an 8” threaded rod. This allow full adjustment for pry length and height respectively.
Негізгі бет HWH Leveling Jack Return Spring Replacement
Пікірлер: 11