its pretty crazy you can make this one handed. just imagine what you can acomplish with 3 hands! one hand to hold the camera of course. one hand to build the project. and a 3rd hand to make hot pockets.
@Kristi98
2 жыл бұрын
🤣🤣🤣🤣🤣just imagine..!!🤣🤣
@aguilarruel5638
2 жыл бұрын
I'm your subscribers my friend
@jacksonvilledrivemap4012
2 жыл бұрын
Too much jittery movement of camera. It’s a headache just to watch. Nice idea but bad and too much moving video.
@Kristi98
2 жыл бұрын
Thank you very much i will make sure to fix that in my upcoming videos
@cyberblade6669
3 жыл бұрын
99 cent store has phone tripod for a dollar
@Kristi98
3 жыл бұрын
Yeah I know...but its not DIY.!!
@darkshadowsx5949
2 жыл бұрын
@@Kristi98 make a tripod out of wood. i've done that before in a pinch. or better yet make a hydrolic tripod!
@prestonian1066
Жыл бұрын
Is that not false advertising then! ;-)
@Kristi98
Жыл бұрын
Exactly
@rsz90182
Жыл бұрын
This thin is now a suicide jack.
@ChandraKumar-ns3bj
Ай бұрын
Can i get the total cost and requirement for this project?
@Kristi98
Ай бұрын
I dont know the cost...i had the parts for this depends what you have you have the motor!??you have a jack you have the mettal the wires!??And it depends you can find those things localy at second hand car parts...the motor and maybe the jack
@abdallahhachem4985
Жыл бұрын
how would you bring it down ? i want to work on something similar to that
@julio9618
Жыл бұрын
Con peso no anda
@Telectronics
3 жыл бұрын
Is there a problem If the motor runs without limits or will the hydraulic jack break the motor when it´s at the end ? I want to design a press with that.
@Kristi98
3 жыл бұрын
You should stop it manually in this design....but if you do a press you can put a terminal switch to cut the power just before its on its limit and neither the jack nor the motor will have any problem...
@ale_ethio4753
22 күн бұрын
👏👍👍👍👍👍👍👍👍👍👍👍👍👍👌👌👌👌👌👌👌👌👌👌
@Chaudhary-concrete
3 жыл бұрын
outstanding
@Kristi98
3 жыл бұрын
thank you very much my friend
@julio9618
Жыл бұрын
Sin peso anda bien , con peso no anda, hace videos que sirvan para algo
@aguilarruel5638
2 жыл бұрын
What are the materials this video because I need for research report my friend
@Kristi98
2 жыл бұрын
The materials you will need are a Hydraulic jack,a 12 v windshield wiper motor...a base for these to mount in my case wood but you can make it from steel and weld the base together and some pieces of scrap steel so you can make the arm and motor mount Some thick wire to connect it and some small ball joints you can get from automotive or tractor spare parts store and finally some relatively thick wire.!!
@calisthenicspis5103
3 жыл бұрын
hii sir , how much is the rpm that you been used in this motor?
@Kristi98
3 жыл бұрын
I don't exactly know my friend the rmp it is a windshield wiper motor....but i am guessing around the 50-100 rpm range ..!
@ramasamyramasamy5181
Жыл бұрын
Thiss misen good I want pH number and price
@jeromeborromeo5334
Жыл бұрын
ano pong tawag dun sa naikot na motor?
@Kristi98
Жыл бұрын
It is a motor from a car...it is a windshield wiper motor.!!
@toptenkiller3531
3 жыл бұрын
Need report for this project ☹️
@Kristi98
3 жыл бұрын
What it the problem...what do you need my friend.!?
Пікірлер: 31