⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzitem.info
@rondapierson9313
Жыл бұрын
No long drawn out video short simple and straight to the point thank you great video 👍🏽
@tarkusnj3
Ай бұрын
Good video but I want to know how to determine which solenoid to replace and the method/procedure to figure that out.
@richardshalla
5 ай бұрын
That is very helpful. I am thinking on doing this job on my 2010 santa fe sport AWD. On occasion I get a high Rev hard shift into I believe 2nd to 3rd. Seems to happen when I am coasting along not if I'm hard accelerating. I am looking for videos that will show me the way and helpful tips and info. Thanks for your help.
@thomasrivera1557
2 ай бұрын
Hello guys I got a A6FM1 4WD. My transmission has problems on 3rd gear shifting to 4th. It’s does not shift on time and the rpms go up and once goes into gear will bump hard but if I let go of the pedal will shift almost normal. Which solenoid do I need to replace ? What would you guys recommend for repairs ?
@shark70007000
2 жыл бұрын
Of course, the thumbnail picture is at the end, where 4 links for other videos come up, so I can't see it in the video. But those look similar to the VVT solenoid for my 5.7 Hemi. The original screen broke apart on my engine. Then the Dorman replacements keep having one of the new style screens pop loose. It then slaps around at the edge of the valve, causing it to malfunction. I've discovered that the Dorman is junk. I've had to replace that solenoid on my VVT 5.7 Hemi, 4 times already. Since it's under warranty, I keep using the same replacement. But I put a retaining ring over the screens this time, similar to the new replacement from MOPAR. The thumbnail picture, just made me want to share about the Dorman garbage, that I have had to deal with. Guess I should have gone to the dealership and ordered the right part. LOL
@aliciahill7482
Жыл бұрын
Very thorough video Thank you
@DragonThruster
13 күн бұрын
Is this accessible from underneath the car? Or do I need to remove the engine and everything to replace the solenoids?
@poonhandler520
3 ай бұрын
No one wants to take off the front end and radiator. To fix their vehicle transmission problem. However informative content. Might convince my coworker to do this on a weekend. His car has been having issues. Too bad Hyundai didn't design the sensors on the outside of the transmission. So you could easily access them
@chicagoui9299
Жыл бұрын
Auto repair guys, can I do this cleaning to the VVT selenoid on the exhaust side as well? I replaced the intake vvt selenoid and I'm still getting an engine light for bank b. Any help would be amazing. I have a 2010 Santa Fe v6 3.5
@williammahan3838
4 ай бұрын
after you clean and check each solenoid should you hit the valve body with the same cleaner
@williammahan3838
4 ай бұрын
i need to replace the lowest solenoid on the valve body as it sits in the transmission but cant find it on amazon with your link can you help
@crystalanderson2456
10 ай бұрын
My car is going in drive n first then second then third it’s like I’m driving a automatic stick shift. Is it the soloneid
@abdulrahmansalim9773
2 ай бұрын
Hyundai amica 2002 automatic 1L. No movement drive or reverse symptoms? Shift lever smooth ok 😁
@franciscogotay8748
Жыл бұрын
Hello, my name is Francisco Gotay, I'm from Puerto Rico, I have a 09 hyundai accent and it has problems with the transmission solenoid, code p0760.the car when it stays in gear 3 but you turn it off and on and it takes all the gears until it detects the problem
@markflo2842
6 ай бұрын
did you find out what it was?
@jjbogart37330
7 ай бұрын
Do you know the torque specs for 2013 2.4 gdi bellhousing bolts
@jouaxiong1989
Жыл бұрын
What does it mean when stuck on 4th gear. I cant recall the code. I'll look it up again
@vibin_headbanging
9 ай бұрын
P0741, I have the same issue.
@markflo2842
6 ай бұрын
Bad speed sensor, im going thru the same. did you find a fix?
@nalsulimani
4 ай бұрын
good day my friend i have sonata 2009 gls 2.4l with transmission problem on D not working properly Fails when switching form first to the second gear but its working with tiptronic properly SHIFTING SOLENOID make this problem?
@ericseddon4573
Жыл бұрын
Okay so how do you add the fluid you took out theres no dipstick in mine?
@jeffkovene4420
2 жыл бұрын
What if that ground wire was for the transmission control solenoids?
@k2par
Жыл бұрын
Which one controls 1,3,5 7 gears? My transmission for my 2016 is only working in 2nd, 4th, and 6th gears (and Park and Reverse). Or is that a different problem?
@thabangmaphutha6673
Жыл бұрын
Did you get it sorted cause mine is taking 3,5,7 and park
@k2par
Жыл бұрын
@@thabangmaphutha6673 not yet and it looks like this guy doesn't respond anymore to his channel
@chinaboss6683
7 ай бұрын
Check and replace solenoid or wire harness.
@ejusdem_generis
3 ай бұрын
I’ve a Santa Fe which only goes in reverse..
@k2par
2 ай бұрын
@@ejusdem_generis Sorry to hear that. Mine transmission just went out 2 weeks ago and is probably not worth replacing :(. You won't see me ever owning a Hyundai again
@psychomaniac189
Жыл бұрын
you have to take the engine out to do this?
@chinaboss6683
7 ай бұрын
No.
@thomasedwards3372
2 жыл бұрын
Slow down😉
@topshottadondada6805
Жыл бұрын
Cant find your video that has the diagram that explains which is which. NOTHING on the internet is showing me either
@yvonnesurls5720
Жыл бұрын
Does this apply to 2007 Elantra?
@josechi.6560
10 ай бұрын
thank you for the video but the accents just wont let me pay attention, sorry
Пікірлер: 37