Thank you. I was having a hard time finding any information on the Sonata ignition breakdown. Your video gave me everything I needed to diagnose and fix my daughters car. Your description of each component goes further than most self help videos. Great Job.
@John_Conner222
Жыл бұрын
Same for me. That switch that he pulls out on the backend of the cylinder is what I need to replace. Car has power but will not turn over or click. Fuse and battery continuity is good so it has to be that white plastic switch. Just can't find anyone showing how to get to it. If I can fix it it would save hundreds of dollars in towing and repair.
@xcmskim4
Жыл бұрын
Back when Hyundai/Kia made quality all metal key ignition assemblies. Starting in 2011 some genius at Hyundai/Kia decided to make the ignition switch out of plastic instead of metal. This allowed the key cylinder to get easily removed without the use of any tools hence it being stolen with USB cords. The models with the metal assembly (seen in this video) does not have an immobilizer but you'll tools and a lot of force to start the ignition.
@jrider1378
Жыл бұрын
I just want to say thank you for this tutorial. I was struggling like crazy on how to assemble the center guide into the ignition switch in the back. I spent 5 hours trying to do that not knowing about the security lock for the gears. installed the guide, put it in reverse, it locked it in. Thank you bud!
@Unexpectedperspectivesnow
9 ай бұрын
what do you mean???
@streetsmarts1893
3 ай бұрын
Thank you, sir bumping the key in with my hand was enough to get it to turn and come out. Thank you so much.
@jadenriveras8683
5 ай бұрын
No, this is four years later, but just wanted to say amazing video for minutes and I realize what I needed because you did the hard work of pulling out the whole column with the center punch tool I may be able to just pull out the lock cylinder when I come back from Harbor freight getting a center punch tool again life saving video
@garrycelum4750
2 жыл бұрын
Great video, you saved me a bunch of money. Your "tap-the-cylinder- while-turning-the-key tip" worked like a charm. Thanks for the video.
@Kai-cl6jc
Жыл бұрын
Thank you so much. I'm a Hyundai tech and I couldn't get the key cylinder out, and this helped. Thanks, again
@dianeenfinger2143
6 ай бұрын
Very helpful…. My husband got everything out and put everything back in and everything works on car except car engine won’t crank. Ac works, radio etc. just not engine.
@davidg5704
Жыл бұрын
This was very educational at a time that I need to do this to my 05 Optima. Not going to remove column but drop it down to gain access to those security bolts. Why couldn't they just used security bolts instead. Ugh... Thanks for the video.
@davidsookram489
3 жыл бұрын
I had the same problem,what a disgrace ,Hyundai should have that as a recall and refund money to those who suffered inconvenience
@michaelscott356
2 жыл бұрын
Great video, James. You had me as soon as I realized that both you and I are TWO of the only SEVEN people in North America who realize the company's name rhymes with SUNDAY. (Why they never used that in an ad campaign, I'll never know. Oh well.) My challenge to you, and any of your hundreds of followers, is, I think even simpler than the problem you've solved here....and that is: WHAT IS IT THAT NEEDS FIXING IF MY 09 SANTA FE WILL "START" WHEN I SIMPLY TURN THE KEY TO "ON"? Oh, and how do I DO whatever it NEEDS? Based on what I see you doing here...I'd HOPE it's as simple as removing and replacing the "ignition switch"....that white plastic thingy you remove beginning at 9:00. D'ya suppose that's all I need? And if "Yes", is it just the part? Or is there any "exotic" programming or compatibility BS I need worry about? Thanks, James.....and/or anyone else who can kick in 2c worth!
@deedeefaulk9790
3 жыл бұрын
Thanks so much for a great video. You saved my life !
@explorer909
2 ай бұрын
2:06 - But where to you find replacement bolts once you take those off?
@franciscocastro4666
Жыл бұрын
Thanks soo much for that video man .👍👍👍👍👍👍
@CJ-xv7rw
8 ай бұрын
you can use hammer and screwdriver or hammer and chisel
@davida871
Жыл бұрын
Thank you this helped me immensely 👏
@Unexpectedperspectivesnow
9 ай бұрын
I have the same problem with my Hyundai ATOS from 2002 (manual transmission). I guess the components are very similar! But what part of this assembly should I suspect?? The thing where the key sits, or that long thing "downhill" (behind) from that? That thing which is aligned in the same direction as the key! Please please give me some hints, because I really need to solve this problem ASAP! The key is very worn I should add. We can unlock the steering lock, but cannot turn the key further to ignition position or start!
@morales0510
2 жыл бұрын
would the tapping of cylinder work in reverse to try and get it into "acc"? Someone tried to steal the vehicle and damaged the lock cylinder.
@jr42bomber3
Жыл бұрын
Can’t find that spring button for the life of me it’s like a complete different car
@MemeKing44
9 ай бұрын
that was great, really appreciated it, however you didnt explain what part you replaced to make it work. this was helpful for me because my hyundai tirburon was stole, they removed the lock cylinder, and the ignition switch, and i need to decide weather i need to replace that housing or not. as i am ordering parts, and purchasing a new lock cylinder.
@alexanderheilman2526
2 жыл бұрын
I thought you said you couldn’t move the key…hints why you pulled the steering column. ??? You didn’t have to pull steering column to turn the key?
@jakubrojek3652
8 ай бұрын
Do you really need to take entire steering assembly to remove the cylinder? Is there any other way?
@arzannagwaswallafc1550
8 ай бұрын
Hey my Hyundai accent had the same issue where the switch cylinder (white mechanism at the back) went bad and my car needed programming, the mechanic bypassed the system and played with the wiring to add ignition and accessories switch along with a push start. This was my first experience and my car was stuck midway where the mechanic assisted me just wanted to know how much would it cost me if I need to do the complete ignition change along with programming??
@rodwanbornaz1282
2 жыл бұрын
very useful, thanks for the effort.
@Theundisputedtruth
7 ай бұрын
My car was vandalized and stuck in lock so any other way ? 😢 my key did work and stop the day of replacement with my luck , please help 🙏
@jakubrojek3652
8 ай бұрын
How did you move the key to accessory position? Mine won’t move…does that mean I won’t be able to take it out at all?
@22kpar1xcyberdyne9
2 жыл бұрын
When you dont have the luxury of having column out, first insert steering lock gently. Finesse it into place. Index the round plunger dot at 5-6 o clock. Once it fully seats you can easily feel the bottom side. It will be at a 2 oclock position. Then finesse the white switch into place. Then screw it down. Now you can get the key lock into place and it will finally seat into position allowing the lock pin to engage.
@peteryeung111
2 жыл бұрын
Thank you so very much for making this video James. I have the exact same issue. Are you able to provide the part number for the replacement cylinder? Thanks again!
@filmfreaken
3 жыл бұрын
Do you have an explaination for removing the switch plug at 5:23 ? :)
@randyfisher873
3 жыл бұрын
@Jagger Owen yea, I have been using Instaflixxer for since november myself :)
@scamchan
2 жыл бұрын
I was just wondering are all these ignition switches the same that look like this one??? So I just ordered one for my car looks simple to install without removing all the panels.
@osamadawi3543
4 жыл бұрын
Good job ..... 👍🏼👍🏻
@diamondlove1279
Жыл бұрын
My kia was stolen. I have my ignition switch but it wont fit in the chamber cause they used a screw driver so i need that part replaced. What is the name of that peice that the ignition switch goes in
@ludigracic
Жыл бұрын
I have Hyundai accent 2000year and I lost the key. Car is in lock position and I cant get it to accesory mode. Im trying to break a pin for a 2 hours and nothing seems to work.
@arturos571
2 жыл бұрын
drill 2 holes in bolt head and use snap ring pliers
@michaelscott356
2 жыл бұрын
Sounds a little more...."complex", shall we say? But definitely sounds workable. (Providing, of course, the "fingers" of the pliers are long/deep/rigid enough to extend down to the bolt head without being interfered with by the walls of the inset)
@Brando-n3t
3 жыл бұрын
I just bought a entire new ignition piece and when I put it in my car it turns it over but won’t start it
@fyb3x890
2 жыл бұрын
U have to reprogram it
@tnamen1307
3 жыл бұрын
I can't turn the i20 key to on position. It's stuck at off and steering wheel is locked. So, how to remove the ignition cylinder whenever this situation happens??
@juancovarrubias8555
Жыл бұрын
Did you fixed it ? Currently have the same problems
@tnamen1307
Жыл бұрын
@@juancovarrubias8555and what's your model and year?
@tnamen1307
Жыл бұрын
Yes i already fixed it
@tnamen1307
Жыл бұрын
@@juancovarrubias8555 how do I contact you? I will help you
@tnamen1307
Жыл бұрын
@@juancovarrubias8555 you can see my details
@bigdude8654
Жыл бұрын
So why didn’t you just remove the shear bolts while the column was still in the car? Unnecessary work.
@LOCO2009hec
3 жыл бұрын
I have a question for you. I changed my ignition cylinder key lock and replaced by a new one, put it on accessory and the new part do not turn lock so I can’t remove the key. Any idea what’s going on?
@ericmeredith1096
Жыл бұрын
What if you can't get the key into accessory position?
@ericmeredith1096
Жыл бұрын
I tried with the hammer but it won't turn
@shawnpulsipher5019
4 жыл бұрын
Does that solenoid also control any of the starting functions other than when the car is in Park? My car will sometimes not start and other times it will start and if left in Park or Neutral the starter will randomly engage. I was thinking it was the solenoid that needs to be replaced. What are your thoughts?
@dogwood3851
4 жыл бұрын
Excellent video, in all respects. Thanks !
@drekostackz3172
3 жыл бұрын
How much does it normally cost to get a new one
@MrDavew402
3 жыл бұрын
Why do you say turn key to ON position to take the switch off, and all the other videos changing the switch, say turn it to ACCESSORY ? Can do it either way ?
@scamchan
2 жыл бұрын
key cylinder and switch are two different parts to remove
@samuelcantu2967
4 жыл бұрын
I bought a new lock cylinder and it still locks up on me
@gratefulhooker909
3 жыл бұрын
How did you fix it? What was it?
@JoshMcKenna
3 жыл бұрын
Ditto, I have the same problem. I haven’t yet figured it out.
@alexandrepelletier1884
2 жыл бұрын
@@JoshMcKenna so what happened one year later i have the same problem
@alexandrepelletier1884
2 жыл бұрын
So whats th solution ?
@JoshMcKenna
2 жыл бұрын
@@alexandrepelletier1884 I ended up donating my car for a local non-profit that fixes up and gives away cars for people stuck in a cycle of poverty due to unreliable transportation. They have better tools and experience than I do to fix it right. Problem is a piece inside that ignition cylinder that sticks and jams sometimes. That, and a plastic piece inside the steering column that catches it. Unfortunately, that part in the steering column is inaccessible behind breakaway bolts.
@thirstyviaduct
3 күн бұрын
Is the steering plunger brass? I think I sheared mine with my ass.... I was getting in my wife's car. She has short legs. I hit the steering wheel hard. It went into steering lock. Now it won't release no matter how much I jiggle or wiggle.
Пікірлер: 65