This is factory recommended jack/lift points on Hyundai Ioniq. However, I'm looking for a way to put the car on 4 jack stands using just a floor jack. any idea?
to put it on jack stand i ended up doing this. i drove the ioniq up on rhino ramps. front bumper is low and it barely cleared. once on the ramps you can see the sub frame . i put a floor jack there and jacked it up till the front tires were high enough to pull out the ramps. once high enough i took the ramps out and then put jack stands where the side jacking points are and lowered it onto the stands for the rear , i used 2 floor jacks and put one on each of the control arms and jacked it up evenly at the same time. then i put jack stands on the rear jacking points and set it down on those . now this woks great assuming you have rhino ramps and 2 floor jacks. my ioniq has 30k on it now and i have done it 5 times already this way with no issues . i have to do my 2020 civic the same way. the subframe is in the rear now and the car is so low its hard to get a floor jack under it without putting it on ramps first
@MattSeals
5 жыл бұрын
Wow, gorgeous video. Thnx ...
@pnv8477
4 жыл бұрын
Is there a video on how to jack up the car and have it on jack stands? Maybe I have to figure it out and make a video?
@55ting55
4 жыл бұрын
PNV Rivera please do so, that will make my life a lot easier.
@pnv8477
4 жыл бұрын
To jack up this car for tire rotation or maintenance you could use 2 low profiles jacks but would not be able to use a jacket stand or 2 low profiles and a regular jack. I found a spot in the back to hold up the car. They sure made this non diy friendly
@peterc2452
3 ай бұрын
Do you place the Jack on the actual rail with the two markers on it so it only touches that rail or in the space (rectangle) closer to the exterior of the car ?
@55ting55
3 ай бұрын
On the actual rail.
@lordflick895
4 жыл бұрын
I see the lift points but no jack point. Every season I just jack the car up and swap out the wheels. This year I wanted to do things properly.
@55ting55
4 жыл бұрын
Lord Flick there is no jack point, according to the manual. I wish it has, that would make my life a lot easier.
@lordflick895
4 жыл бұрын
@@55ting55 that's disappointing. I can't help but think that's intentionally done.
@pnv8477
4 жыл бұрын
Lord Flick Of course. No reason not to do it. They went out of there way.
@mike4071
2 жыл бұрын
You need to buy or make something like these that uses the same pinch weld jack points to lift the car as jack stands at the same time. kzitem.info/news/bejne/z6WGtqeemJeKY44
@LivingLife128
4 жыл бұрын
i wonder if there is a center jack point
@55ting55
4 жыл бұрын
Whyme123 No, according to the manual. I wish it has, that will make our life easier.
@mike4071
2 жыл бұрын
You need to buy something like these that uses the same pinch weld jack points to lift the car as jack stands at the same time. kzitem.info/news/bejne/z6WGtqeemJeKY44
@lordflick895
2 жыл бұрын
@@mike4071 brilliant! Thank you
@mike4071
2 жыл бұрын
@@lordflick895 It's really dumb they don't have a center jacking position but this is the next best thing. You can make it yourself if your handy with your hands. I've also seen youtube videos of people making a wooden version though a different design.
@lordflick895
2 жыл бұрын
@@mike4071 that sounds equal parts interesting and sketchy. I hate that modern engineering is about going against an owner's right to service their own stuff.
@youtubesque
2 жыл бұрын
I am searching how to put my ioniq ev on 4 jack stands too, did you found the best method ?
@55ting55
2 жыл бұрын
Nope, I still can’t do that. However, I don’t need to. If I wanna change oils, I use ramp. If I wanna change tires, I jack it up corner by corner. To rotate tires, I use two jack.
Пікірлер: 22