Do I need it? Absolutely not. Do I want to have one? You betcha
@ProfaneGod
10 ай бұрын
So much for refusing plow trucks huh.
@ryansbigideas
10 ай бұрын
Fun fact about GDI.. IF the injector seal that goes into the block is bad, it will sound like a machine gun or a Subaru..
@ZackCarlson
10 ай бұрын
It's like you read my mind...
@kurtvanluven9351
10 ай бұрын
Wasn't "boring" at all.
@slowride55
10 ай бұрын
Customer: “So what’s the problem?” Wes: “I checked the oil through the #2 spark plug hole.”
@turbocobra
10 ай бұрын
crazy to think we live in a time of $30,000 disposable cars.
@WatchWesWork
10 ай бұрын
iPods with wheels man!
@gqinc1202
10 ай бұрын
@@WatchWesWork ipods have lasted longer then that motor
@JHACbiz
10 ай бұрын
yep still have my og ipod and it works fine. @@gqinc1202
@DusterNutbar
10 ай бұрын
My iphone 6 has twice the miles n still works good
@kingofthepod5169
10 ай бұрын
I installed rytec doors at a Hyundai dealer and they had seven parking spaces devoted to spare engines. When I say these are lousy I have proof.
@superbaardman2141
10 ай бұрын
Like they say: Every machine is a smoke machine if you operate it wrong enough.
@aserta
10 ай бұрын
It's a special feature that allows the operator to check the crank shaft through the spark plug hole. Engineers. They think of everything. :)
@Lnmwr
10 ай бұрын
LOL
@Hey_Its_That_Guy
10 ай бұрын
Looks like the plug did a little wire EDM on the piston. You sure get some strange stuff, Wes. Thanks for sharing!
@tourettes4893
10 ай бұрын
Put some spark plugs in the exhaust, it won't help, but it will look cool driving to the scrapyard.
@thesteelrodent1796
10 ай бұрын
that's how you go to prison - aka very much not street legal
@dangerline95
10 ай бұрын
@@thesteelrodent1796you must be fun at parties
@AmericanLocomotive1
10 ай бұрын
I was going to ask why a 2019 Hyundai wouldn't still be under the 10yr/100k warranty - then I saw 112,000 miles. Someone sure drives the wheels off that thing.
@Nebbia_affaraccimiei
10 ай бұрын
is 25k year a lot?
@ZanderKaneUK
10 ай бұрын
in the UK we get a 5 year unlimited mile warranty, and KIA do 7 year unlimited warranty. 10-12k miles a year national average. I've got a 2019 1.6 GDI Turbo Tucson. Great car at only 48k on the clock.
@peterwest7855
10 ай бұрын
In the UK the annual average mileage is less than 7 thousand so that thing has been thrashed. I would guess, here, lease companies would fully depreciate the car value over 3 years if you asked for a 30K annual mile contract. i.e. zero value residual at four years.
@TimErickson-oc6sd
10 ай бұрын
@ZanderKaneUK that's beause the actuaries say you'll wreck it in 3.67years
@deplorablelibertarian
10 ай бұрын
High RPM's for long periods of time will damage those GDI engines. The lower the RPM's the better, because there's a huge amount of pressure in the bore. That thing was driven hard every time it ran. They also eat oil, so you have to change the oil on time and check it every 2 weeks.
@nathancavanagh9916
10 ай бұрын
those motors have a recall on them, im a Hyundai tech and the way to get a free motor is to send the car to the dealer and let them perform a "bearing clearance test", basically its a tool the applies pressure and then vacuum to each cylinder to test the amount of play in them, if it fails the test, you get a free motor
@brandond6724
10 ай бұрын
Haha the good old ghost buster machine!!!
@walterbrooks3539
10 ай бұрын
That's cool. How does it measure the play? Some type of micrometer through the spark plug hole? Or I guess you could apply vacuum, then measure, then pressure, then measure. Maybe the piston wouldn't move when the pressure/vacuum was taken away?
@brandond6724
10 ай бұрын
@walterbrooks3539 exactly micrometer in spark plugs hole then pressure and vacuum are applied to the piston
@nathancavanagh9916
10 ай бұрын
haha exactly@@brandond6724
@nathancavanagh9916
10 ай бұрын
exactly @@brandond6724
@craigsudman4556
10 ай бұрын
Customer says, "Well gee Wes can't you just weld the hole in the piston? It's not like you can make it any worse." I did that to a brand-new steel belted radial tire that I had put on my truck. Parked too close to a storm drain and the corner of the casting of the storm drain was as sharp as a knife. Man, I let some bad words lose that night. Great video thumbs up.
@GNX157
10 ай бұрын
If this was part of the KIA engine recall and they also had the ECU firmware update and or the new logic program for using the spark knock detection (plus another recall which required a new harness for the knock detector circuit) to detect other signs of engine damage, then their engine warranty has been extended, and possibly for more miles than this has on it.
@tyleralt8886
10 ай бұрын
Can't quite see your face when that tire went out but I can imagine what it looked like 😂
@daviddogruel7851
10 ай бұрын
The departure out through the smoke cloud and then the entrance and tire pop was great!
@Mishn0
10 ай бұрын
A long time ago, my first car was a VW Squareback. I bought it without a motor and put in a used 1850cc dual port, dual carb motor with a couple of Webers on it. One of the carbs was NFG and leaned out on a hill at open throttle and burned holes in both pistons on that side. Lots of smoke. LOTS OF SMOKE, and the motor is inside the car with you in a Squareback. And, I was in the left lane of the 405 on my way to San Diego and completely blinded by the smoke inside of the car. I crossed my fingers and trusted that the other cars would notice the smoke and give me room as I pulled over onto the right shoulder. I didn't hit anybody and got stopped. I lucked out at a VW swap meet at the Orange County Fairgrounds and found a NOS dual carb Solex setup and swapped the Webers for a couple of wheels. So, in my experience, burning a hole in a piston does result in smoke. Thick, white smoke.
@dingusbingus8554
10 ай бұрын
Never heard of that happening with Webers. Theyre typically really good quality carbs
@Paramount531
10 ай бұрын
Back in 2016 we were very interested in a new Geneis. The great warranty was a contributing factor. In the end, we decided to get a loaded up Toyota Highlander Limited. I have not regretted the decision.
@psd28
10 ай бұрын
That hole in the piston is probably one of the most exciting damages ive seen on this channel
@Me-zo8yc
10 ай бұрын
Spoiler alert 😂
@JoshuaJonah
10 ай бұрын
Thanks for the spoiler before I even started the video.
@psd28
10 ай бұрын
@@JoshuaJonah boohoo
@timewa851
10 ай бұрын
I just start watching & you ruin it for me : ( (((((( this is why we can't have nice WWW YT vids ! kidding.
@MrNeverseeme
10 ай бұрын
Next episode: "Drill, tap, plug a piston hole for permanent fix".
@CubbyTech
9 ай бұрын
That spark plug broke and looks like that piece got in between the piston and cylinder wall - causing the fail! Wow. Glad you shared, I enjoy each and every one of your videos!
@davidjohannson4364
10 ай бұрын
It has been driven as a 3 cylinder for a bit, just disconnect the injector and coil and drive it or send it to PK mechanics who would remove the head and weld the hole in the piston.
@BitterCynical
10 ай бұрын
Would a welded piston last through a test drive long enough to sell someone that lemon as a good condition car?
@enzoperruccio
10 ай бұрын
@@BitterCynicalAbsolutely! My dad's Fiat 128 had a welded piston after the timing belt snapped, bent the valves and one of them subsequently dropped, making a huge hole on the piston. He had the guy that was fixing the head patch the piston up too, put everything back together with new valves and rings and boy oh boy, that engine ran like a DREAM. Lasted us two more years before we sold it, never skipping a beat and powerful as always (had some unknown mod that made it scary quick). Saw it at a parking lot many years later running like nothing ever happened.
@BitterCynical
10 ай бұрын
@@enzoperruccio Well damn. I thought for sure there'd be problems, like if it didn't break again right away then it'd be too heavy or light and cause vibrations, or that cylinder would burn more rich or lean or something.
@cmans79tr7
10 ай бұрын
That's brilliant. I never thought about welding the piston. There's a chance that repair of such a small hole could last the life of the car.
@enzoperruccio
10 ай бұрын
@@BitterCynical Nope, as long as it's done right like in our case it's probably just as good if not stronger than a new piston, had no noticeable vibrations either. That was on a 4-banger though, I'd love to see it done on a modern 3 cylinder.
@QuantumStellar
10 ай бұрын
youre the best mechanic because you leave the mishaps in, instead of editing them out! Go Wes!
@pegr69
10 ай бұрын
Looks like the sparkplug arc went to the piston after the ground pin was gone.
@Carnold_YT
10 ай бұрын
I've seen this happen, el cheapo sparkplugs can burn through pistons quite fast. Often times the pistons crack before a hole is completely throughthe piston crown.
@cmans79tr7
10 ай бұрын
Pegr69 - Very good assessment.
@GrandsonofKong
10 ай бұрын
Makes you wonder when it started throwing Check Engine if the owner delayed it as it continued to run "okay"
@ronsills4103
10 ай бұрын
Turned a spark plug into a plasma cutter... Miracles of electricity....😂
@rafmatt1607
10 ай бұрын
@@Carnold_YTfor sure, but that looks like a factory ngk plug
@joe2mercs
10 ай бұрын
Spark plug was probably sparking to the piston crown causing localised repeated detonation. I would do a pressure check on the other cylinders and if within spec I would take the head off and check the cylinder walls. If not scored leave the block in the car, check main and big end bearings, hone the ‘bad’ cylinder, replace the piston, change the plugs and fluids and see how she runs. A bit of a risk and a fair amount of work but much cheaper than an unknown used engine from a breakers yard.
@WatchWesWork
10 ай бұрын
I have a feeling the head is cracked.
@dirkroorda8457
10 ай бұрын
It sounds almost incredible for it to do that, but this engine presumably has a CR over 11:1, so the piston crown does get pretty close to the spark plug...
@kevinm3059
10 ай бұрын
Definitely worth it to put the video up. Good for all of us to see that kind of internal damage. Especially anyone that may have been considering buying a Hyundai.
@johnclamshellsp1969
10 ай бұрын
Pretty much any GDI style injection system is junk, or short lived and very expensive to repair. I would never own any engine like that. No way
@thesteelrodent1796
10 ай бұрын
@@johnclamshellsp1969 all modern gas engines are GDI. Impossible to get proper fuel economy and fulfil environmental regulations otherwise. It's not GDI that makes them junk, though, it's the cutting corners and trying to do crucial components as cheaply as possible with no concern for reliability
@robkelly9397
10 ай бұрын
My daughter's Hyundai Kona received a new motor under warranty, at 5 years and 90,000kms in Australia, and a brand new loan car too!! Originally not happy, but after your video, we may have been very lucky!!
@belowme4927
10 ай бұрын
AT LEAST YOU DIDN'T DRIVE THE TRUCK INTO THE WALL
@Blueshirt38
10 ай бұрын
That is just incredible. My truck isn't perfect, but it really makes me appreciate it being 20 years old and still kicking up dirt every day.
@ralfie8801
10 ай бұрын
You did good recording it Wes, I for one enjoy videos where you find the problem in short order and show us a hole in a piston. I work on locomotives and very seldom find a hole in a piston unless it’s obvious from a damaged valve train issue. I usually find bad turbos or a cracked cylinder jacket leaking water and compression into the crankcase and sometimes oil into the cooling system. Thanks for posting your work on YT, it makes a bunch of us happy to see different things that can go wrong.
@MRrwmac
10 ай бұрын
Wes, Don’t see that everyday. Glad you put the scope on it! Thanks for the video. Some mechanic will learn something from this one !
@mantvydas8810
10 ай бұрын
Honestly if that was my car and I didn't get a happy ending as you say I'd probably buy a piston and just replace it and send it. Not much left to lose.
@DeadReckon
8 ай бұрын
I worked at a oil change center for a brief period, any time we got a GDI for a change, we marveled at the fact these engines can run so long on only two quarts of oil, and the fact that the owner didn't seem to notice or care their vehicle had a Batman approved smoke screen. Although we never serviced vehicles which were smoking heavily or had engine noise for liability. One woman came in wanting a service on I think a 2016 Kia with some variant of the TDI, we refused to touch it because it wasn't knocking on heaven's door, it was hammering down the gates. She didn't make it out of the parking lot.
@SueSmith-ew7iv
10 ай бұрын
Thank you for 2 great episodes this week. Christmas bonus 🎄🎅🏼
@KG-yn9qi
10 ай бұрын
Had a Corvair engine/transmission rear transaxle mounted to a VW bug pan with an old school fiberglass buggy 140 spider motor on a turbo! Was on freeway doing 145mph when burned hole in a piston! Smoked just like that ! Was easy fix replaced the one jug and was back on the road
@briananderson8733
10 ай бұрын
It is good to see even catastrophic engine failures and diagnosis.... So do record them.....
@DuaneDonaldson
9 ай бұрын
For that price, I would give a serious inspection with the BOROSCOPE and look at rebuilding the engine to stock size if possible as I started out as an engine guy. If they don't like that, I would try to buy the vehicle and rebuild it however it needs to be done to sell it for around 10K, thanks for actually posting this one. Cheers.
@Tiger351
10 ай бұрын
Nice to see Hyundai is still making BIC cars after 40 years 😂 (got that name here in Australia because they were dirt cheap and disposable), glad I never the i30 SR I was looking at now (same engine).
@LN997-i8x
10 ай бұрын
There was a 5 year window where they were actually good, after which they started slipping again.
@johnsmith7676
10 ай бұрын
Every vehicle made today is a "BIC", regardless of maker.
@saleen367
10 ай бұрын
My son's 2012 Kia Optima just "went home" last month. That 2.4L is a dependable little bugger ... so dependable that the class action law suit will replace its existence so he can relive his nightmare again in 7 years.
@mikeg3529
10 ай бұрын
I was right with you with the stuck injector diagnosis. Especially with how it sounded cranking over...i was thinking "yep, sounds like its close to hydrolocking, its gotta be an injector dumping fuel into a cylinder" Crazy. I wonder what the root cuase was? I know LSPI is common on these, but that usually breaks a ring land. The piston looks like it was hit with cutting torch.
@martin-vv9lf
10 ай бұрын
I think if the injector is ok, it's a shorted mosfet driving the injector in the ecu.
@mikeg3529
10 ай бұрын
@martin-vv9lf could be. I do think the direct injection injectors function a little differently than the plain old Mosfet switching 12 volts on and off like the older port injection systems. I've heard they use a higher voltage, and may have other differences as to what is actually sent to the injector and how it's sent.
@papawheelie5835
10 ай бұрын
Wes, I'm sorry. My mind must be in the gutter but when you're talking about a Korean made car and you used the term ..."no happy ending"... Well, suffice to say, my coffee rinsed my sinuses. You're the best, man!
@kenmarcum7917
10 ай бұрын
Love your presentations. Don't understand anything about what you are talking about but just love the way you do it. Giving a shout out to your able assistant. You make a wonderful pair. Can't leave out the "kiddo" and Max. Warm feelings to all.
@briancasey4917
10 ай бұрын
Bought a new 2006 Kia Sedona. Whe I retired from trucking I started a vending business so I bought another new 2014 Kia Sedona. After two years using the 2006 Sedona, I sold the business and the 2006 with 230,000 miles on it. The 2014 Sedona is over 200,000. They have the 6cylindet Kia motor and both vehicles are going strong. The guy that bought the 2006 drives school bus and he goes by my house everyday. (bus garage is a block away and it was 4 years ago when I sold it.) So I have had great experience with Kia's. Aside from tires, oil changes, air filters and brakes, usual maintenance stuff they've been good vehicles.
@nErfEr308
10 ай бұрын
I think the biggest thing to be careful with these engines is get the valves cleaned since it's a GDI and change the oil and sparkplugs more frequently than you normally would. I've changed my oil every 3k regardless of it being full synthetic and it's been good so far.
@williamwhite9767
10 ай бұрын
I'm glad you recorded it! I always learn something from your videos.
@tmacie2
10 ай бұрын
Totally worth the filming! I feel that tire at the end....deflated.
@harnettsgarage
10 ай бұрын
I had a buddy when I was in my final year of Automotive Service Tech school ( September 2022-June 2023 ), most of what he did was replace those engines at the Hyundai dealership he worked at, always had a bunch of cars on the lot waiting...
@jbbuzzable
10 ай бұрын
On the bright side, back when I was a little girl, most all cars were ready for the junk yard at 100K.
@WatchWesWork
10 ай бұрын
Getting back to our roots.
@Poppi2006
10 ай бұрын
9:42 Nobody told me that this was the Comedy Channel. Sorry, but I laughed out loud.
@SUBZEROinfinity
10 ай бұрын
I would say the customer could opt to rebuild the engine with new pistons and injectors for less. Nice short video man. I miss the longer videos.
@wim0104
10 ай бұрын
catalysts are messed up too, all exhaust sensors, ...
@LN997-i8x
10 ай бұрын
@@wim0104I'd be really concerned about where all that metal went, and what it did to the other components.
@thesteelrodent1796
10 ай бұрын
it's not just the pistons side, though. Since there's a hole in the piston and shrapnel in the cylinder, there's likely metal bits that have gone through every part of the engine and exhaust. You have to take the whole thing apart and check for damage, and will likely find more to replace along the way. And with this crap engine, just taking it apart will break more stuff, because everything attached to the block is made from flimsy plastic and tinfoil. It's way more work and hassle than a modern Hyundai is worth. Maybe if it was a classic car with a proper engine it'd be justifiable, but for this junk, hell no
@BFT88
10 ай бұрын
Wes you need to write “No Smokers” on your sign out front hahaha 😂
@cullenmiller8170
10 ай бұрын
Boy that lift sure keeps getting you. 😂😂
@phildragonslayer8127
10 ай бұрын
Glad you did record and post, keep em coming.
@ranger178
10 ай бұрын
people at work thought i was crazy to put a new engine in a 6-year-old Subaru worth 8000 or more it was only 3000 for a low milage engine and is still running well about 4 years later.
@major__kong
10 ай бұрын
I don't think about what the car is worth when deciding whether to repair something. The real comparison is what a new monthly car payment is. A $2000 repair only has to make it 4 months before you're back in the black. But a $500 monthly car payment is the gift that keeps on giving for 5 years.
@JHruby
10 ай бұрын
That is exactly the way I think about it. I just put $10,000 into my SUV. But that's about 1 years worth of payments on a new one.
@daveclark8337
8 ай бұрын
It's crazy that you HAD to put a new engine in a 6 year old Subaru, unless you'd already racked up 250K miles.
@ranger178
8 ай бұрын
garage stripped the oil drain plug and it worked loose I could not prove it or anything. my wife and daughter just kept driving it with check engine light on and such till it stopped running. so, I had to buy a used engine out of my own pocket.@@daveclark8337
@kevinblevins2612
10 ай бұрын
We don’t have one of those magic junk yards in western NC either!!!
@mph5896
10 ай бұрын
I just bought a cvt for a Nissan. Car-part range was 2-3k for a high mileage used one. Local dealer wanted $3600 for a reman. I found an Infinity dealer 150 miles away that would sell a reman for $2400. Bought it online with pickup option. They notified me 3 days later it was ready. Drove over and picked it up, dropping off the core at the same time. Yeah, 6 hours of drive time with $100 in gas. But it was worth it.
@LN997-i8x
10 ай бұрын
You're braver than I am, I wouldn't touch a Nissan CVT for fear of it exploding, let alone replace one!
@stephenvale2624
10 ай бұрын
Don't go Wes!! We need you!! (I am having flashbacks to movies with people trying to commit suicide by car exhaust.) 😂
@montestu5502
10 ай бұрын
Wow a 2019 engine is toast?! The newest car I have is a 2008!
@terryrogers1025
10 ай бұрын
Ouch, that has to hurt the ole pocket to shell cash for a repair like that, different engine or different vehicle, either way it adds up $$$$$$ that one wasn’t planning on spending. Thanks for the video sir.
@ScottHiland
10 ай бұрын
Hyundais used to be so much more solid than they are. As you said, around 2013 they started having serious engineering and QC problems with powerplants, usually around turbo oil consumption. It's a shame bc my daily driver is a 2008 Elantra that I bought new, love driving, and will be driving until the wheels fall off.
@saltycarl6581
10 ай бұрын
I would avoid all kia/Hyundai and sabaru. At least the modern ones.
@JoeAroner-SIWAYTV
10 ай бұрын
There was a 6 year period where Hyundai addressed their image as a maker of junk. Once they revamped their image they let train run off the rails again. I think this is a company strategy as they worked on quality improvements when they took over Kia. We had a 2009 Tucson that was awesome.
@stanpatterson5033
10 ай бұрын
My daily driver is a 2000 Elantra wagon. 2.0, manual, aftermarket Pioneer stereo. The thing soldiers on and on. Put a new rear sub-assembly in it. It's (over)due for its' second timing belt. Just wants to keep going, so I oblige. But, yeah, the more modern ones (and Kia's too) have become nightmares waiting to happen.
@elesjuan
10 ай бұрын
Well they revamped their lineup and gaslit a ton of people into believing they’re better cars than the likes of anything else.. throw a bunch of fancy “features” a car in its price point shouldn’t ever have to begin with, it’s no wonder they fall apart. Can’t wrap my head around why people continue to buy these things.. then all I can do is shake my head when I see the dinguses driving the much more expensive “genesis” vehicles lol.
@rafmatt1607
10 ай бұрын
@@elesjuanall I hear on any video with Kia or Hyundai I how they're rated number one by consumers for reliability. I know otherwise
@pauljohnstone4723
10 ай бұрын
The Hyundai and the Kia both use the same motor and both have the same issue with the motors failing at relatively low mileage. I have seen the same issue on several other channels with comments about the class action being taken against the manufacturers. Years ago when the Hyundai was first released in Australia an acquaintance decided to up date their 3yr old model for the new version. The dealer offered $0.00 as a trade in as the engines were known to constantly fail and a new engine cost more than the car.
@TheBrokenLife
10 ай бұрын
Well... It is the season. Let us all remember the Holy Piston. 😂
@SchoolcraftVideo
10 ай бұрын
I think it is good that you posted this video. It shows the wildler side of what might be found turning wrenches. Thanks for your Videos, I enjoy each episode.
@MyTheBlackJack
10 ай бұрын
Hey Wes, i would recommend asking the dealer. Sometimes a QQH or FFF engine may be available if they have a recall associated with them, and they may be generally cheaper, if they are available. EDIT: QQH/FFF is a part change for a "better" that can sometimes be less money wise
@kabic7893
10 ай бұрын
My daughter Tuscan had the engine replaced under warranty, but hers was a 2014 I believe.
@MyTheBlackJack
10 ай бұрын
@kabic7893 Glad you were able to get it done!👍 I've done hundreds with Kia so far, but when i was working for Hyundai, over 5 years did roughly 1000-1100 engines, ableit in the 1.8L MPi elantras for the cylinder scuffing issue. With Kia i see a lot more of the theta series, as they adopted that engine in more vehicles.
@zstation64
10 ай бұрын
@@kabic7893 This is a Hyundai, not a Porsche...
@MyTheBlackJack
10 ай бұрын
@@zstation64 I believe he meant Tucson. It may have autocorrected to Tuscan
@johnbee7729
10 ай бұрын
Too much fun for I foresee a Watch Wes Work mashup just prior to Eric doing an engine tear down on I Do Cars. Could ve fun.
@DaRockCRX
10 ай бұрын
Burning holes in pistons seems to be a more common issue with some hyundai GDI engines.
@Jenstyler1
10 ай бұрын
I love car-part, helps me look up compatibility stuff sometimes.
@bigunone
10 ай бұрын
Famous last words " Should be an easy fix"
@wynottgivemore9274
10 ай бұрын
Wes I'm glad you shared this with us, cause it's good to know just how rediculous these crap automobiles have become,so I will avoid them like the plague 👍 Ps you really should put a pipe over the exhaust and run it out of your shop, even if it's just a car that's running fine,with no smoke...please don't be breathing that stuff in .
@zoidberg444
10 ай бұрын
I have never seen a petrol engine do that. Sadly not entirely uncommon in the 2.2 Ford diesels in the transit or Ranger over here. I did a really quick and nasty repair on my mates Transit which did this - hole right through piston No. 4. Put a piston in it, a new set of injectors, belt and a clutch kit and amazingly its still knocking around 2 years and 50,000 miles later. Not something a mechanic could sell but my mate had no money and van prices have gone through the roof.
@Me-zo8yc
10 ай бұрын
You must be in the UK. You sound like a good mate to that guy!
@MattyEngland
10 ай бұрын
Yeah I was just going to say the same thing. Only seen this type of damage on Diesels.
@zoidberg444
10 ай бұрын
@@Me-zo8ycI was really nervous about selling him the repair because I wasn't sure if it would work, if the engine had more damage. They are fairly complicated to work on. The injectors in that engine are shocking. So many of them are banana'd in the scrap yard. Either cracked pistons, holes in the pistons, jumped timing. Etc
@Me-zo8yc
10 ай бұрын
@@zoidberg444 I wouldn't worry mate it will fail the next MOT anyway on rust most likely being a Ford 😂
@JGC4214
10 ай бұрын
Glad you did make this video. Very interesting to see what happens to other brands. I'm a forever Toyota owner, 6 vehicles so far. 439,000 Kms on my 2002 Camry XLE with the 4 cyclinder. Viewers - No point telling me about some random Toyota that took a crap - I'm not listening ! H Ha. JGC
@OSUCharger
10 ай бұрын
Certain brands of vehicle just shouldn't be purchased. This is high on the list.
@mbrick
10 ай бұрын
I agree. As much as their marketing and new designs allure people in... Just no.
@Mind-your-own-beeswax
10 ай бұрын
The diesel versions are fine. So what you say is based on inaccuracies.
@thereve
10 ай бұрын
“They” say the v6 Hyundai/Kia engine is fine.
@billyhorton5779
10 ай бұрын
The motoring public buys vehicles based on what they look like, never doing anything research beforehand on these lemons, until after the engine quits. Throw away cars. Buy a toyota.
@OSUCharger
10 ай бұрын
@Mind-your-own-beeswax mind your own beeswax.
@martind701
10 ай бұрын
That's ok on the short video Wes. All your videos are worth watching.
@silasmarner7586
10 ай бұрын
That looked like the Fields of Flanders during a phosgene attack in WWI
@BurnAndHackett_RC
10 ай бұрын
Holy pistons Wes !! That is a wierd bit of damage. I don't know how you work and calculate labour rates and decide on what work needs to be carried out on a customers vehicle, but if that was my own car I would have been tempted to pull the other spark plugs and compare the spark plugs and any piston / cylinder damage - simply out of curiosity .
@briankirk5617
10 ай бұрын
My neighbor has a 2014 ram 5.7 "hemi", he just paid the local ram dealer $16,000 cdn to replace the bad lifters they came with from the factory, I seen the workorder, beware of ram pickups and dodge dealers,
@mph5896
8 ай бұрын
Yikes, did that come with lube😆. Cam and lifter job, That is about $1500 US in parts all in. Book time is 16 hours for a 4wd. Did they put a brand new engine in it for $16k?
@Der8cho
10 ай бұрын
Have a 2019 Hyundai Santa Fe, 50k mi & sounds like a rattle can. Fuel dilution in oil is beyond crazy! I'm doing 3k OCI just to keep it alive. Luckily, we have a lifetime warranty. It's like engines are progressing backwards on reliability.
@djhorn5769
10 ай бұрын
I have to agree with you on this one. It’s definitely not worth it to spend seven grand on a $10,000 car. It would be one thing if it was a classic that was being restored, but this is not a classic. In fact it’s one of the biggest piles of garbage I’ve ever heard of.
@TonicofSonic
10 ай бұрын
Or a nice truck. Putting a 10k motor into a 10k truck is a good idea considering you will pay 20k for the same truck with 100k on it. These bic lighter hamster cars are hardly worth the tires after 80k.
@ryang5441
10 ай бұрын
a DOUBLE UPLOAD?! you are too kind to us wes.
@DarkFlamage
10 ай бұрын
Like, I'm sure! Junkyard gets a rolled over car in , then sells just the motor alone for 5K???? There oughta be a law against such price gouging!
@arthurjennings5202
10 ай бұрын
Well, that was hilarious. A Hyundai commercial came on right after your video. Had to share the ""Hyundai Get Away" moment. Hard to believe.
@Martin.Wilson
10 ай бұрын
For the life of me, I will never understand why these home garages don't use corrugated plastic pipe to vent exhaust out of the garage. You can even close the garage door by cutting a port big enough to accommodate the plastic exhaust line and have a swivel cover that drops into place when the port is not being used. Easy, cheap effective, safe and quick.
@wssides
10 ай бұрын
Nah. that's an old fashioned 80 year old technology nobody would do that anymore!
@Martin.Wilson
10 ай бұрын
@@wssides Why the hell not? Are you suggesting that having your garage filled with exhaust is better? I don't get it.
@wssides
10 ай бұрын
A deep mystery to me. It worked so well and so cheaply for so many years but now we see so many u-tube repair shops with no pipes or hoses. @@Martin.Wilson
@tomhgeary
10 ай бұрын
A lot of garages do use them, but there are certain types of americans who refuse to believe that smoke damages health. no slight against Wes, its a cultural thing, its why people delete the emissions systems off their own diesel trucks, they don't get that they're literally poisoning themselves. the problem should self-correct, given time.
@churblefurbles
10 ай бұрын
@@tomhgeary It won't because the smug don't have children.
@leedress2187
10 ай бұрын
They had to replace the motor in my daughters 2018 tucson. Luckily I had receipts for all of my oil changes. They did an oil consumption test and then tried a fix on the original motor. It failed again within 5000 miles. Then they replaced the motor. 86000 miles. Low tension oil rings are the culprit on most of these motors.
@gman2974
10 ай бұрын
Thanks for putting this video up. Seems like a lot of bad stuff with GDI engines. The wife has a 2005 Hyundai still going today. I thought Hyundai was going to be another Toyota quality car maker many years ago. Guess not.
@dlewis9760
10 ай бұрын
Styling is subjective and I think Hyundai, Kia + Genisis designs these days are first rate. Which is completely useless if they make the things out of Tofu.
@michaelm2716
10 ай бұрын
Hey Wes thanks for posting. In Australia the Hyundais and Kias share motors across brands and numerous models and that motor is quite common. Same motor is in my son’s Kia Cerato. just a thought!
@ricebike
10 ай бұрын
Hopefully they will have an extended warranty for it... Still looks too nice to trash the whole vehicle if it's not rusted out yet😢
@ksokie63
10 ай бұрын
Hey Wes 👋, Thanks for sharing. Not what I was expecting, of course. But short and sweet job done.Have a great weekend 👋
@divadyrdnal
10 ай бұрын
That was some impressive smoke out of a gas burner…
@rickn8or
10 ай бұрын
Jussst another reason to avoid GDI engines like the plague. Like AFM/DOD, a solution in search of a problem.
@bradley7723
10 ай бұрын
I remember the old days when you just went to the junkyard, picked up a long block for $300 and they even gave a 30 day warranty on it, which doesn't sound like much but those old v-8s (60s to early 80s) would let you know in a day or 2 if it was a runner or not. The real nice thing is any small or big block of the same manufacturer could be swapped out with any cubic inch engine, ie: 305 to 350 or 302 to 351etc you didnt have all these one off style motors. Oh well, times are a changing.🤔
@airplanemaniacgaming7877
10 ай бұрын
Why let people be able to do their own replacements when you can _force_ them to go to you for only one engine option? NOTE: I fucking hate that line of thought, I'd rather be able to get my own engine swapped for a different one, say I want to go down in power (for more fuel efficiency, not everything needs to have 1 million HP, even if it sounds cool), you could swap a V8 for a smaller I6.
@daveclark8337
8 ай бұрын
You can't do that with KIA/ Hyundai. There's so many other people in the same boat with blown motors, so the demand and the price of the motors is Crazy high.
@bradley7723
8 ай бұрын
@@daveclark8337 your spot on, I've seen some junkyard modern engine prices and they are priced higher than an 80s used truck or car. In the mid 80s you could go to the chev dealer and buy a brand new target master 350 4bolt main for $999 and that was a complete long block. But I'm an old fart living in the past and seeing new trucks priced higher than what I paid for my house just amazes me. Times have changed. 🤔
@supergeekjay
10 ай бұрын
Vauxhall had a problem here in the UK with their B10XFL GDI engines. The 1.4 versions of the Astra were blowing pistons and bending rods at really low mileages like 3,000 miles due to pre-ignition and lugging. I got the 1.0 litre turbo and haven't had any issues. I've got mine up to 48,000 miles so far, fingers crossed. Definitely past run in mileage!
@ron827
10 ай бұрын
Add Hyundai to the list of no RVs and plow trucks list
@bertjetolberg103
10 ай бұрын
Boats!!! And boats.
@Rorschach1024
10 ай бұрын
Given the ground strap is missing, I wonder if maybe the plug was grounding to the piston and it spark eroded the hole.
@calholli
10 ай бұрын
What you could do is just finish drilling that hole in the piston (through the spark plug hole) --- then tap the hole.. and then screw a plug into it with several little slots around the edge of it; and then just stake all around the edges to hold it in place. If you could pull off a surgery like that without pulling the head-- that would be pretty incredible. :)
@WatchWesWork
10 ай бұрын
Uhh…
@kevinthomas895
10 ай бұрын
@@WatchWesWorkplug the piston hole and trade it in to a Hyundai dealer on a used Toyota
@calholli
10 ай бұрын
@@kevinthomas895 Jb Weld should buy you some time
@richardlincoln8438
10 ай бұрын
@@WatchWesWork Ha ha, yes Sir. That would be incredible. 😅
@guzziwheeler
10 ай бұрын
Much too complicated. Plug the hole with JB Weld through the spark plug hole and it will be fine.
@jerryking2418
10 ай бұрын
We seldom see holes in pistons. That's probably a good thing. Thanks for sharing.
@jazko
10 ай бұрын
This is actually the newer model engine, where you have a service port through the piston, too look at the crankshaft. How come you did not know of this? I thought you were a mechanic!
@WatchWesWork
10 ай бұрын
So the plug just fell out? I'm on it!
@mikaeljonsson4686
10 ай бұрын
@@WatchWesWork😂😂😂
@terford1995
10 ай бұрын
@@WatchWesWorkhey wes i have a question. What Brand is your borescope? Sorry for my english im german
@nickpopelka
10 ай бұрын
@@WatchWesWorkscience experiment put jb weld down there and seal the hole 😂
@ranger178
10 ай бұрын
wow two Wes videos in 1 day must be Christmas present.
@makemeafirewall
10 ай бұрын
Would it be possible to put a hose on the exhaust to keep the smoke outside of the shop? Maybe try to park it closer to the entrance?
@Glasrandkante
10 ай бұрын
I think he has his standard workplace in the back and all the tools around that. Tube: Possible, but it needs to have some suction, If you just stick a long tube on your exhaust, the motor will run differently because the amount of air, or in this case fog, that needs to be moveds would be much higher.
@paisleyprince5280
10 ай бұрын
Lots of Wes' troubles are intentional KZitem drama to make for more interactions in the comment section.
@erik_dk842
10 ай бұрын
@@paisleyprince5280 Including the empty battery in this episode.
@GNX157
10 ай бұрын
@@paisleyprince5280Definitely
@mph5896
10 ай бұрын
That thing would not even come inside my garage. Diagnose it in the lot
@dustcommander100
8 ай бұрын
The gentleman on "The Car Care Nut", a former Toyota dealership mechanic, surprised me when he said the Toyotas were not meant to be rebuilt, and that it was not feasible to do so. He did put a long block in a car for a customer who insisted on it, but he pointed out that the car would not be worth the cost of the long block. It's sad that we're at the place where an engine isn't worth rebuilding, but that is the case. I wonder if a used engine might be more available for a Toyota.
@stevejohnstonbaugh9171
10 ай бұрын
Good to see your video Wes, You gotta take what rolls into the shop - we understand. That's part of your channels draw; what's coming in the door next. And it wouldn't be December without at least one "crusty of plow truck" making an appearance 😉
@Oddman1980
10 ай бұрын
"Would you spend $7,000 on a $10,000 car?" I own a Suzuki Samurai, I've made much worse financial decisions. This car only has 112,000 miles on it. I have a friend with a most similar Hyundai, I think with the same engine. It has about 50k on it and they have to keep a case of oil in it because it uses so much. Great engineering, Hyundai. Did just what the beancounters wanted. So glad I don't own one.
@jasonyoung5628
10 ай бұрын
Perfect opportunity for a cummins swap.
@tylermacconnell217
10 ай бұрын
Probably going to need just a small front suspension upgrade to accommodate the 1000lb engine!
@WatchWesWork
10 ай бұрын
Not to mention it’ll triple the value!
@madisonjam85
10 ай бұрын
@@WatchWesWorkand generate it’s own fuel!
@Larry-325
10 ай бұрын
Wow Wes. What the heck. Don’t hear about that these days.
@GeminiWoods
10 ай бұрын
Wife bought a 2018 Kia Sorento from a Ford dealership 2 years ago with their "best warranty." We noticed very quickly that it was burning a large amount of oil and it was smoking very bad. Back and forth with the dealership, they kept misdiagnosing it. Finally they told us to take it to the Kia dealership down the road. Kia informed us of a recall on that specific engine block and it required a new engine and wouldn't cover the bill. We waited almost 7 months for the work to get done. Turns out Ford was aware of the issue with the car and the warranty they sold us wouldn't cover it. I wasn't about to drop almost 10k on a vehicle I literally just bought. We contacted the district attorneys office and they put Ford on notice. 2 days later we get a call from Kia saying we could come get the car and Ford paid for it out of pocket. So yeah, Hyundai engines seem questionable at best...
@Prometheus1954
10 ай бұрын
I saw this happen on another automotive channel with a 6.7 Cummings motor. The injector stuck open a blow a hole right through the piston but only did it when it was running. Same white smoke like you’re experiencing. The channel I believe is davesautocenter out of Utah.
Пікірлер: 1,2 М.