I have forgotten to say few things and features about the tracker in the video. 1 The tracker electronics is designed so it can be controlled from a phone 2 the tracker is upgradable so you can upgrade it to go-to 3 It contains integrated intervalometer and remote control from web app.
@XX-vs6lt
11 ай бұрын
Ahoj. Ty jsi z Ostravy? Myslim ze bych měl zájem o jednu Tvojí hračičku. Montáží mam az moc, ale tohle vypadá fakt dobře;)
@ogstartracker
11 ай бұрын
@@XX-vs6lt Čau napiš mi svůj email zde : ogstartracker@gmail.com a já ti můžu poslat můj osobní email a můžeme se sejít
@ogstartracker
11 ай бұрын
@@XX-vs6lt Ahoj ?
@ogstartracker
6 ай бұрын
ahoj ?
@snaj9989
21 күн бұрын
Hi, what are the disadvantages of using an Arduino for this project compared to the ESP32. I know Arduino does not have bluetooth or wifi, can it still function without being connected to a computer? I do have a intervalometer so I do not need that function. I just need the tracking. I have a spare Creality 42-40 stepper motor with 200 steps. I did check for the model 17HS4401S but it seems like the ones that are locally sold here are 1.8 degrees so 200 steps like this Creality stepper. Is there a noticable tradeoff when using a 200 step stepper motor. Size wise only difference is that the stepper I have is 1mm longer than yours. I would like to go with this one for first try if it is okay. Other than that I also have the same Tair lens but the older version. Unfortunately mine is missing the aperture mechanism so I made a small cut on its body from the side so I can manually change the aperture by sticking a screw driver in there directly. Optically it is flawless and I can adapt it to my fujifilm camera. It seems like all I need is the mechanical parts and a stepper driver. I have a decently new camera and good collection of lenses. I am being held back by the lack of star tracker. I also have a very sturdy tripod. Do you think I should give this a try with the stuff I have?
@pinkzombie
11 ай бұрын
Your rig is impressive. 300mm @ 400s & no guide is incredible. Thanks for releasing the 3D model.
@benhauber1979
5 ай бұрын
I have never seen so much technical talk look so seductive. I watched the whole thing, and I don't even own a 3d printer, but now I want one. You're amazing! And a wonderful human for making this video.
@Cheapass-tro
11 ай бұрын
Really good job on the tracker and the video. It was very nice to be taken on your journey through to the final product. Not many share their fails. Thanks and all the best.
@ZombiemodzFPV
Ай бұрын
First, Thank you for all the hard work. I have never designed anything of this magnitude but even the smaller scale projects I have done makes me appreciate what it takes to make all of this happen. I'm all in. I have already printed about 40% of this in PLA+ and the parts are coming out great. Thanks to all your collaborators as well. Looking forward to testing out my first OG Startracker! (actually it will be my first star tracker of any kind)
@mosesrodriguez1494
3 ай бұрын
Impressive endeavor. You had a vision and created a great DIY project. Keep improving the tracker.
@pino6144
11 ай бұрын
Still waiting for clear skies on a night where i have time to try out the one you sent me :) also missing a batinov mask... and a decent lens... but we'll get there
@mathusuthanvenkatesan
11 ай бұрын
AMAZING WORK!! I've been trying to make a 3d printed extremely cheap telescope + manual tracker. Trying my best to hit the 40usd mark. Just to see if it is even possible to have a usable astro tool at such a small price. There is not much information on this niche of a topic. So. This has been very informative. Thank you!
@jpulley
4 ай бұрын
This guy is a freaking legend!
@fatihsonmez
6 ай бұрын
dude, what you guys are doing is just amazing. subbed, liked and waiting for updates. just amazing.
@lesumsi
11 ай бұрын
Thanks for sharing this! I have built it myself (the second to last one in the credits). And it's just amazing. I was always curious about astrophotography, but afraid of committing so much money. This got me finally into it. Only some bearings, gears, and belts, as well as a laser and a lens heater, were purchased. The rest I had scattered around, or were part of my photography equipment.
@AlexN-Astro
7 ай бұрын
This is an amazing piece of work! Congratulations for having the idea, the patience and the skill to build it, refine it and end up with a very high quality result!! But to then provide the 3D models so people can build there own is outsanding! I can't wait to see what you do next!!
@ogstartracker
7 ай бұрын
Hi I have started development of the OG cube tracker which will be tracker that will have hopefuly payload limit arround 10-15kg so it will have performance arround eq5 pro . I plan to make it from 2020 aluminium extrusions and off the shelf metal components and keep the 3d prints off structrual parts. 3d prints I plant to use for gearbox and few other things. I plan to have the first prototype done by March. Do you plan to build it ?
@richardszaniszlo410
11 ай бұрын
Hey man! I have just started building the tracker. Huge thanks for releasing the plans and making it accessible! Amazing design. I'll try to finish it this semester and share the results. Cheers!
@BadYossa
11 ай бұрын
Mate, that's so cool. Really enjoyed watching this video, absolutely fascinating.
@cribbsprojects
11 ай бұрын
Great story! Nicely told. Congratulations on your successful mission.
@TimK-1971
10 ай бұрын
Wow! Simply beautiful tracker. Brilliant!
@aradani3
7 ай бұрын
Bravo! I just got a 3D printer and just had to sell my AZ GTi mount. So I was thinking about printing a DIY star tracker. I will definitely give yours a try!!
@jamesmartz4755
3 ай бұрын
Awesome - I'll definitely be building this!
@astronomyaffordablerakesh9536
8 ай бұрын
Nice design and work bro
@joefog964
5 ай бұрын
A true labor of love. Fantastic work
@user-mp4dn6oj7z
8 ай бұрын
Tysm I been looking for this video you deserve a subscriber
@ScorpyDeNiro
Ай бұрын
Very impressive!
@sunnyrana4248
10 ай бұрын
Very interesting video, wish I found this 3 years ago when I started. Good luck with your channel. I have to admit you sound like Borat the astronomer hehe..I like your humour. Thanks bro.
@falkoollermann4012
9 ай бұрын
This is insane! Going to Order it soon Thx m8
@WojciechUsarzewicz
11 ай бұрын
I'm currently building it. The only issue I run into was the m6 that was supposed to hold the ball head; I never seen a ball head for m6 screws, most of them require a 1/4'' or 3/8'' screw. Fortunately, I was able to buy one, it's on its way :).
@ogstartracker
11 ай бұрын
Hi I have uploaded on printables version for 1/4" screw. I used m6 screw because it was the closest screw to 1/4" and you can use a adapter from 1/4" to 3/8" this adapter should partially work on m6 screw.
@WojciechUsarzewicz
11 ай бұрын
@@ogstartracker I must have missed that 1/4 version when downloading STLs. No worries though, everything else works quite nicely :). I also made some mods to the stationary part - I've added four holes for screws, since I designed an additional round mounting element for my EQ-2 stand. Once I get everything working, I'll share it on Printables in the "makes" tab.
@paulramasco6769
4 ай бұрын
This was an awesome video of an awesome project, well done!
@ogstartracker
3 ай бұрын
thanks
@Killbayne
11 ай бұрын
Awesome work! I might just have to resort to this because prices went from 250€ to 450€+ thanks to the pandemic
@rooftopastronomer2697
7 ай бұрын
I have the gears and I'm taking inspiration from your design Thanks
@thetallweatherman2246
7 ай бұрын
Great design and video. Amazing ingenuity !
@demej00
6 ай бұрын
Dracula as a nerd. This is an awesome tracker. I will build one.
@florianschaan
6 ай бұрын
Such a great Project! Is the Upgrade to the extra Axis still in development? And of so, will it be upgradable upon this version? Im asking because I am thinking about printing this tracker, but im not sure if i should wait for the upgrade
@ogstartracker
6 ай бұрын
the second axis is now released for beta testing. And i am working on new tracker which i will release in 5 months and it would be eq5 equivalent. I also plan to make a metal version of this tracker.
@florianschaan
6 ай бұрын
@@ogstartracker Nice! Thank you for your great work!
@alomgirmiah
10 ай бұрын
Really impressive!!
@Seanjones1990
10 ай бұрын
thank you for sharing this with us
@zalllon
4 ай бұрын
Very nice!
@alexxhelilaj7547
10 ай бұрын
You're so underrated!!!
@ogstartracker
10 ай бұрын
Thanks
@thelittleonion9566
3 ай бұрын
In the first moment I thought he was high af
@kobrazlobra370
11 ай бұрын
The akcent is the best I am from czech and our language is quiet sharp no sining. So english for us is like a sining. But this english is super fun to listen. Even i does not care about the build i listen to the whole video 🤣 Could I ask where are you from ?
@ogstartracker
11 ай бұрын
Ostrava
@PafMedic
10 ай бұрын
Thats Awesome..But You Call Your 1st DSO A Bad Image..When Most Beginners,Would Be Thrilled To Have That Image.Great Job,And Clear Skies❤️🔭✨🌏❤️🙏🏻❤️
@terdengarwe6957
8 ай бұрын
thaaaaaaaaaaaankyou ... you save me a lot
@BeyondLumen
4 ай бұрын
Is this a parody video of the dobsonian power guy? The two sound alike
@radiacia_3511
10 ай бұрын
been wondering for a while if i can compensate for the Earth's rotation by hand and if i can take pics like that
@F4H33M97
4 ай бұрын
Any chance there'll be scope for a counterweight set up?
@priyaop5040
3 ай бұрын
Could not find any circuit diagram , only got the gerber files...... Any way to get the circuit diagram? thanks
@dmytropashko8209
10 ай бұрын
Great job!
@AlphaSlide141
3 ай бұрын
when does the DEC upgrade into your shop
@ogstartracker
Ай бұрын
when i will release og star tracker v3. Now i am working on v2.
@backyardkulay700
10 ай бұрын
Great im excited to di this… anyone else have tried?thanks
@user-nt6tk2qs2h
6 ай бұрын
Could you please provide information on the battery reference that was utilized?
@ogstartracker
6 ай бұрын
it was just an average battery.
@demej00
5 ай бұрын
Question: how many hours do you think this tracker has until the components start wearing down?
@ogstartracker
5 ай бұрын
i am using it over an year and i didn't have any issues.
@demej00
5 ай бұрын
@@ogstartracker When I get back to the States, I will definitely order one. Thanks for your hard work on developing this tracker. Awesome.
@AstronomyHub
5 ай бұрын
Hello bro. Could you redesign this star tracker for telescopes?
@jondoethelast7279
5 ай бұрын
Hey. If there some ASCOM drivers available? I want do use it with NINA.
@mehdib2505
7 ай бұрын
very impressive project. I'm also working on a similar project using a planetary gearbox. I want to ask you about the total gear reduction of your gearbox.
@ogstartracker
7 ай бұрын
gear ratio is 101 and dont use planetary gearbox it has a big periodic error and backlash
@charleswijnker4934
7 ай бұрын
Great project! When do you plan on releasing the goto?
@xcruell
10 ай бұрын
Wow really nice video! You are so sympathetic, subbed!! 8:42 woha dude take me on a date first, before turning me gay lmao. jk, love your style
@Noob.astronomer
11 ай бұрын
What material was used for 3d printing? Since i would have to avail online 3d printing services- these are the material options- ABS, ASA, PETG, PLA.
@ogstartracker
11 ай бұрын
Hi, don't you want to buy the 3d printed parts from my eshop? You would support me, and it would be cheaper than online 3d printing service. Use pla.
@iParagOak
4 ай бұрын
How can I use this for s23u mobile? Is it possible?
@tiezieboy7877
7 ай бұрын
Hi, i want to buy your star tracker kit but im wondering how the intervalometer works on it? My camera (eos r50) doesnt have a slot where you plug in your intervalometer like other camera usually do. So how does the intervalometer work on the kit? Also thanks for making such a good affordable star tracker, you really are a life saver 😃
@ogstartracker
7 ай бұрын
Hi, if it doesn't have an intervalometer port, then you would need to use the one integrated in the camera. Thanks. I hope you will enjoy it. Clear skies
@tiezieboy7877
7 ай бұрын
@@ogstartracker Thanks you for answering I think I will buy your kit in a couple of days! And an intervalometer app will do fine hopefully. Clear skies!
@nivedkrishna8212
11 ай бұрын
Are you there in astrobiscuts server
@ogstartracker
11 ай бұрын
yes @gepardmobil
@Justin-pt9pt
11 ай бұрын
How much weight can it handle effectively ? (>=2sec exposure time)
@ogstartracker
11 ай бұрын
3kg
@Potato_Raw9
9 ай бұрын
Will it work effectively in 17 degree N ?
@ogstartracker
9 ай бұрын
it depends if you can see polaris from yours place. So it depends
@idrisomarmorris
11 ай бұрын
Does this work at the equator? Or southern hemisphere?
@ogstartracker
10 ай бұрын
It can work on south hemisphere if you would use polar scope. On equator without dec upgrade i dont recomend using it.
@marklimbrick
10 ай бұрын
What is the gearbox?
@amrelsayed4247
10 ай бұрын
Do you ship to Egypt?
@ogstartracker
10 ай бұрын
yes
@Doomdog308
10 ай бұрын
You need to smile more
@xbox360Rob
10 ай бұрын
Thats a lot of face talking
@ogstartracker
10 ай бұрын
First try
@starkx3071
10 ай бұрын
WOW THANK YOU, I WILL TRY HANDMAE TRACKER FOR ME, TKS U VERY MUCH
Пікірлер: 94