The amount of times I've done this is hilarious. I've spent some serious time perfecting this and 2 parts of cura will give a huge difference and nobody has thought of..... 1) ironing...this will make all the difference. Strength and smoothness. This is a must to a great printed pick. 2) the fuzzy skin in experimental section of cura. This will give you a ton of grip so you're not dropping picks all the time. The perfect mix is making 1/2 ironed and the other 1/2 fuzzy. This gives you great smooth flow over the string with a smooth tip but give you great grip. These 2 overlooked settings will always leave you with a badass pick. Experiment with these to your own liking🤘
@ArtByLukeW
3 жыл бұрын
I have a favorite model of a guitar pick with a space invader on it that I always use as a test chip on my 3D printer. That way the test chips are still something useful!
@TexusNoe365247
3 жыл бұрын
It's funny when he said "We have a HOLE tutorial." I think that pun was intended.
@thetwig187
3 жыл бұрын
This was so personal, so inspirational, so informative and soooo well done!!! Great job prusa team I look forward to these so much
@robdodge5814
3 жыл бұрын
\m/ looks like my studio’s getting a dedicated pick making 3D printer. My guitarists are always looking for picks
@TheLastChapter2023
3 жыл бұрын
You can buy a crate full of pics for 1200.00 ... just saying
@TheRealMisterJ
3 жыл бұрын
@@TheLastChapter2023 but you can get a 3d printer for around 250...can print probably a thousand on one roll, and not to mention the thousands of other cool things you can print... Just saying.
@TheLastChapter2023
3 жыл бұрын
@@TheRealMisterJ not Prusia
@TheLastChapter2023
3 жыл бұрын
@@TheRealMisterJ bro i have a farm . 😉
@phrebh
3 жыл бұрын
Prusa Mini in the corner, churning out picks. Nice.
@whiss42
3 жыл бұрын
Been doing this for a while too, but for my bass. The sound can be way "raspier" than the one of a regular pick, cause the layer patterns &/or texture sheet create a friction higher than a regular pick which is very smooth. I even tried printing with a quite soft material (I think it was a rubber blend) and got a pick that sounds almost similar to when I play with my fingers and is virtually unbreakable ! It's quite an awesome trick to find & test new sounds for us bass players... :) The ones I prefer for the feel & sound were with prusament orange petg and obviously I've got to admit I've broken quite a few of them... I'll try more of these infill tips tho cause they look very cool and might make it better indeed ! :D
@Liz_ArdE
3 жыл бұрын
What an amazing find. I wouldn't have thought 3d printed picks would work either but wow. There's nothing better than the pick that's there when you need it and these are easy to print and fun to customize also I can't think of a better way to use up those last little bits of filament on the roll. Now......if only I still played guitar haha.
@3DJapan
3 жыл бұрын
How about a resin pick? Maybe mix in something like Siraya Tech Blu to make it more flexible.
@k0ffein0verd0s
3 жыл бұрын
I made a few that uses exposed infill for texture/grip. I can recommend it to anyone who wants to get creative with picks and slicing
@skaruts
3 жыл бұрын
I've had a bass pick for many years that I found to be really nice to play the guitar. It's about 3mm thick and rounded at the edges. I'm not too great at shredding with a guitar pick, but with that pick I'm freaking James Hetfield! It's also concave on the sides, so the grip is just perfect. The only problem is... I never know where the hell that thing is...
@ToothEnjoyer69
2 жыл бұрын
Sounds like it's a jim dunlop 3mm big stubby!
@minty4018
3 жыл бұрын
Maybe I'll have to give this another shot. I tried printing some picks for my bass and found that I couldn't get the surfaces to be as smooth as a commercial pick, which gave me this uncomfortable feeling of sanding the pick as I played with it.
@recka5000
2 жыл бұрын
You can potentially try a material that is prone to vapor smoothing. Not sure how it would effect the strength though. ASA or ABS might work nicely with an acetone vapor bath if you've got a setup for venting the fumes, but not sure how they would hold up as picks.
@cozyKyra
3 жыл бұрын
Oh hell yeah White Stripes Thanks for this video! I love this idea. It's got me thinking of so many fun prints now.
@djentslayer
3 жыл бұрын
I saw the Pick Of Destiny in the thumbnail, and that's where you caught me.
@scottmunger
3 жыл бұрын
Love that white stripes song at the end
@LimpiezasMyG
3 жыл бұрын
great! I will do some thumb picks... always wanted to try them!
@1stWorldProblemsSolved
3 жыл бұрын
My first SCAD file was a custom pick generator...back in 2016....oo how things have changed!!!
@EJTechandDIY
3 жыл бұрын
Great project, I think picks have a life of their own that is why we can never find them.
@lukemurphy7917
3 жыл бұрын
I was literally about to add these to my Etsy store but now they’ll be everywhere
@connodude5
3 жыл бұрын
Icky Thump...what an amazingly fun song to play on guitar. Rock on!
@kevinnel7038
3 жыл бұрын
white stripes in the outro, yeah!
@DarkArtGuitars
3 жыл бұрын
I tried this a while ago, but playing more intense stytles like black metal what used to be a pointy pick turned to dust in a matter of minutes. That was in PLA though, maybe a more durable material would hold up longer, or even some tough resin...
@MD-NWWI
3 жыл бұрын
No wonder Joe keeps you around! Your awesomeness!!
@skaruts
3 жыл бұрын
I once made a pick out of wood, and another made out of a plastic card (like a credit card) and they both didn't last a week. The strings worn them out at the tip pretty quick. So naturally that was the first question that popped in my mind: How long do these picks last before they wear out too much? (A normal (thicker) pick can last several years.)
@chaymber_crafts
3 жыл бұрын
I already printed a bunch and they work perfectly fine for me. Espacially custom picks!
@helge1104
3 жыл бұрын
Have used 3d printed pic for 6 to 7 Yares and no problems use PLA and it works fine even a friend of mine that play the guitar for a living is happy and have not bought any pics since he got custom pics form me.
@MMuraseofSandvich
3 жыл бұрын
Having worked in device repair, guitar picks have a different meaning for me (helping to open a device that's glued together). A 3D printed pick probably wouldn't help there unless it's a casting mold master for resin picks that are then sharpened. But for playing guitar, heck, you could design and print a pretty sweet thumb pick. Maybe reinforce it with CF if durability is a concern.
@microArc
3 жыл бұрын
part of me feels like the carbon fiber would hurt the strings more, but i would be curious to see how it performs and sounds
@apinakapinastorba
3 жыл бұрын
Orange triangular picks, those have been my favorites for decades now.
@PrintThatThing
3 жыл бұрын
Dope!
@buildersmark
3 жыл бұрын
Have made several custom picks for individuals. They work well.
@MrBleulauneable
3 жыл бұрын
The White Stripes - Icky Thump (That's the song at the end)
@thierry18
3 жыл бұрын
I've found that pla picks rub off onto the strings much more than standard cellulose picks
@ModPhreak
3 жыл бұрын
Did you try PETG or others as well?
@eduardo_Skywaller1032
3 жыл бұрын
I mean there's always petg and abs tho
@TheMikolasZuza
3 жыл бұрын
I found even PLA to be about on par with cellulose picks. But I guess it depends on the strings and electric/acustic guitar. It definitely does rub off the edge, rounds it quickly, but I didn't see much wear after that. And yeah, PETG, PC, ASA, the options are there :)
@thebeststooge
3 жыл бұрын
Yep, I left a comment about this but YT deletes my comments these days to the creator. No, just no. As a guitar player, 3d printer enthusiast for 9 years this is wrong. Every guitarist will tell you that picks need to be baby ass smooth, and what they are made from DOES matter. There are just some things that should not be FDM printed. Now SLA/Powder/Sinter etc... those can be baby ass smooth in material that would be perfect for this. I still say injection moulding is the best but in a pinch but not FDM for this.
@TheLastChapter2023
3 жыл бұрын
@@thebeststooge Yup . You can't print Tortex . I've printed tons , they're a novelty.
@fooman2108
3 жыл бұрын
I have friends who play and for years, have used picks they made from the lids of coffee cans. I would think that if you know what you want you can tune the pick then remember them.
@ericjones8289
11 ай бұрын
I don’t have a Prusa:( but I do have some Enders I haven’t upgraded to PEI build plates do to me being lazy and attempted to print some pick on the glass beds, they WOULD NOT come off and I ended up having to heat the beds to 80°C and print a thin layer over them to finally get them off. Moral of the story is don’t print picks on glass beds unless you hate yourself
@aiRxShop
5 ай бұрын
What were your settings? Infill, wall height, etc……
@juckendesAuge
3 жыл бұрын
Hello, thank you very much for the video. I miss in Prusa Slicer the aligning of the modified in horizontal and vertical plane and the center of the print object. And that I can center an stl file with a rectangle in height of 0.2mm and then merge it to have even better hold on the print bed. Currently I align this manually.
@jaydekaytv
Жыл бұрын
Most excellent!
@_gamma.
3 жыл бұрын
Okay the pick of destiny is awesome
@darkness1943
3 жыл бұрын
Whats about PrusaXL.... over a year heard nothing news about it...
@uniworkhorse
2 жыл бұрын
The acoustic guitar's hole: *heavy breathing*
@RussDahlberg
3 жыл бұрын
I was just thinking combining this with laser cutting to put some awesome designs on the pick.
@Be3Al2
3 жыл бұрын
how do you deboss and emboss a logo on a 3d print can you make video for that please
@lyssalud6781
3 жыл бұрын
searching for guitar pick, when zip locker is in fact one made from metal. guitar needs new strings later but at least you can play with a pick
@dieutownsmith1668
2 жыл бұрын
Can you print flexible finger tips ?
@jamesrobinson529
2 жыл бұрын
Can anyone recommend a service that will make guitar picks with 3D printers?
@franteryda4730
3 жыл бұрын
The pick of destiny
@romanmgelman
2 жыл бұрын
2:37 David Bowie?
@WildChinoise
3 жыл бұрын
Cool AF!
@theluc1f3r93
2 жыл бұрын
If you print it lined up (90 degree left or right, mean sideway) so longes part is like spaghetti, then it would hold long time.
@VolkanTaninmis
3 жыл бұрын
Nothing can beat Paul Gilbert's picks!
@Cross8ow
3 жыл бұрын
nice, Dowina Marris guitar :)
@gamefan6142
3 жыл бұрын
The first rule of guitar playing: Don't take your eyes off your picks. I use 3d printed picks of 1mm thickness or more. I've also made a pick card for those emergency guitar playing situations.
@CC-kc5lb
3 жыл бұрын
use wood filament it sounds decent
@kasperchristensen8416
2 жыл бұрын
_The Cult of Jazz III has entered the chat ..._
@Drew_pew_pew_pew
3 жыл бұрын
Only 12 seconds in the video and I can spot already one hanging on the zipper of your guitar bag. There, I fixed it for you 😜
@ChlyDoris
3 жыл бұрын
You should print one in TPU 😂
@Resistantspoon
8 ай бұрын
I saw the pick of destiny in there. Where's my prize.
@C1schecter101
Жыл бұрын
Dope
@Paul_Bearden
3 жыл бұрын
That is not surprising, 3D printed plastic rocks! It is extremely easy to create things using tinkercad.com, especially for aligning things.
@NoxmilesDe
3 жыл бұрын
Still waiting for WiFi for the Mini
@makersmancave9725
3 жыл бұрын
Mmm gotta say it… top pic video…….
@deeareus9886
3 жыл бұрын
#prusaLOVE 😜
@thebeststooge
3 жыл бұрын
No, just no. As a guitar player, 3d printer enthusiast for 9 years this is wrong. Every guitarist will tell you that picks need to be baby ass smooth, and what they are made from DOES matter. There are just some things that should not be FDM printed. Now SLA/Powder/Sinter etc... those can be baby ass smooth in material that would be perfect for this. I still say injection moulding is the best but in a pinch but not FDM for this.
@mattmeola
3 жыл бұрын
Don't play into what big guitar pick wants you to believe. Brian May from Queen plays with a coin which is definitely not baby smooth. Lots of things can work as a pick. I for one think this is a cool idea and if you already have a 3d printer the hurdle to try this out for yourself is extremely low.
@thebeststooge
3 жыл бұрын
@@mattmeola I have done this before (this is not a new concept) and the ridges over the strings sucked. Ridges to grip with the finger and thumb rocked. Just because you can doesn't mean you should, and this is a case of just that. I can use a penny in a pinch, but I wouldn't want to gig with one night after night.
@EarlMiller
3 жыл бұрын
I concur. As a tone chaser the raking on strings from the lines is real evident on wound strings. That might be what some people are looking for but when clean is your reach, no. Its novelty to me. If you are playing on a Squier strat under 200 bucks, sure, but at the other end of the spectrum if you are trying to scrimp on a $5 pick youre disrespecting your investment and anyone who has a good ear. Theres alot of accessories you could easily and effectively make for your studio but picks, nah.
@thebeststooge
3 жыл бұрын
@@EarlMiller I 100% agree. I mostly play 500-1k axes and even on a 200 USD Squire I would hear the difference, but even beyond that I would feel it which is probably why I am hearing a difference because I am playing differently due to those ridges.
@officialWWM
7 ай бұрын
They are too stiff!
@RobBob555
9 ай бұрын
Could i use my resin printer with abs like resin ?
Пікірлер: 98