Do NOT draw smaller voltages like that from the battery, as it will result in pretty severe unbalancing and could cause an early death of the battery. If you're spectacularly unlucky, it's conceivable it could even cause a fire. You need to have another battery specifically for those motors.
@Eduardo_Espinoza
Ай бұрын
I was like, that was smart lol
@PureComedi
Ай бұрын
Only part to disagree with is that it's not gonna cause a fire, li-ion just dies when overdischarged, li-po is what combusts into flames
@minimalskill6592
Ай бұрын
Or just use a beefy enough buck converter ;)
@ConceptCraftedCreations
Ай бұрын
@fallingwater I will not recommend it for permanent use indeed.. But for this test I didn't think it was a problem🤓
@ConceptCraftedCreations
Ай бұрын
@minimalskill6592 That would be a good option indeed👌
@ThanassisTsiodras
Ай бұрын
The algorithm suggested your channel - and I love it! Definitely an underrated maker channel... Keep it up!
@ConceptCraftedCreations
Ай бұрын
Thanks man! 🙌 I really appreciate this!
@Mavrik9000
Ай бұрын
When you want that after-burner experience, but with a scooter!
@SuperSuperSpork
Ай бұрын
I legit thought you were saying you drove that scooter at 50 MPH, and I was worried for your saftey
@ConceptCraftedCreations
Ай бұрын
Sorry! Still working on my English pronunciation🤓
@docmalc47
Ай бұрын
@@ConceptCraftedCreations sounded fine to me
@heidi5942
Ай бұрын
@@ConceptCraftedCreations I struggle to understand the difference between 15 and 50 with English speakers as an English as first language person 😅
@ConceptCraftedCreations
Ай бұрын
@heidi5942 Glad to hear Then it's not necessarily my fault😅
@ConceptCraftedCreations
Ай бұрын
@docmalc47 Thanks mate!😎
@Eidolon1andOnly
Ай бұрын
Now see if a large drone can be boosted with an electric scooter motor 😜
@ConceptCraftedCreations
Ай бұрын
But seriously, I am now genuinely curious about how much lift you could create with a hub motor of an electric scooter🤔 So I added it to the list with possible future projects if you don't mind?🤓
@Eidolon1andOnly
Ай бұрын
@@ConceptCraftedCreations Sounds awesome. Not sure which design might be better; a regular helicopter (lighter weight but less powerful), or a quad copter (heavier weight, bur more powerful). Maybe a compromise with a dual rotor with contra rotating blades. That would be a simpler design, and could still be done with a single motor. With the blades rotating in opposite directions, the gyroscopic forces would cancel out. A quad copter using four motors would be ambitious and complex, and would cost a lot more to make. Either a regular single rotor helicopter or a dual rotor helicopter using one motor would be the most cost effective since you already have the materials. A dual rotor helicopter with a scooter motor for each rotor would be another option and wouldn't be too cost prohibitive. Food for thought. Be really interesting to see the results.
@Eduardo_Espinoza
Ай бұрын
Subbed:)
@ConceptCraftedCreations
Ай бұрын
@Eduardo_Espinoza Thanks for the support🙌
@JohnJaggerJack
Ай бұрын
You should use external lock-washers between the plastic plate and bolts, screwing the bolt directly on to the plastic will wear it out or worse, crack it.
@ConceptCraftedCreations
Ай бұрын
You're absolutely right! And i would if i had them lying around but unfortunately i didn't 🤓
@Super-Poopa
Ай бұрын
have u seen the new 1000 watts DJI e-bike motor and their new high end battery?
@ConceptCraftedCreations
Ай бұрын
Not yet but i will definitely look into it👌
@fabianrudzewski9027
Ай бұрын
Tapping into the Battery somewhere in the middle really isnt a good idea. Especially with something that draws power. You'll throw the pack out of balance so charging with balancing takes forever. If the bms can even handle these huge differences.
@ConceptCraftedCreations
Ай бұрын
It is indeed not recommended for long-term use! But for this test I didn't think it would be a problem🤓
@evanyang1969
Ай бұрын
you don’t have to do any mechanical modification ,simply change the ESC to VESC75 , EVEN with the STOCK motor , M365 is capable of reaching more than 60 km/h with 20s batery
@ConceptCraftedCreations
Ай бұрын
Serious?😮
@PureComedi
Ай бұрын
Issue is that that's a crappy clone and not an m365, im myself a Mi Essential owner and i went 44kmh on just the stock ESC, on 10s/36v with just different software(SHFW if wondering), only hardware mods at the time was just swapping the battery from the 5.1ah one to a pro 2's 12.4ah one, same voltage PS : at this point in time it's a 48v beast that goes up to 54kmh on flat ground w/o wind
@ConceptCraftedCreations
Ай бұрын
@@PureComedi Beast💪
@tsheddie7312
Ай бұрын
I predict your speed camera robot is gonna shoot you with paint! 😂😂😂
@ConceptCraftedCreations
Ай бұрын
😂
@Eduardo_Espinoza
Ай бұрын
🤣
@evanyang1969
Ай бұрын
I suggest using 3d printed nylon cf ring gear/ internal mashing gear on the wheel ,metal motor gear combined with vesc75200, 6384 motor or 8080 motor, 20s3p battery😊
@fresh4331
Ай бұрын
Ik ruik een flink Nederlands accent. Maar hoe dan ook super leuke video, zoals alles wat ik van je heb gezien.
@ConceptCraftedCreations
Ай бұрын
Dankjewel! En dat heb je helemaal goed👌
@socialhostage8534
Ай бұрын
Waarom gebruik je niet het metrische systeem? Je bent toch geen American? Verder goede video!
@ConceptCraftedCreations
Ай бұрын
Dankje👌En dat komt omdat bijna 70% van de kijkers van mijn video's tot zover uit de verenigde staten komen🤓
@highexplosive6700
Ай бұрын
use high power drill like Milwaukee and steel gears. that drill can give out 1200lb. torque on 1500 rpm. +bataries are undead and motor is brushless
@ConceptCraftedCreations
Ай бұрын
I actually thought of using my Makita drill.. Maybe a fun project for the future?🤓
@JoshKetchum
Ай бұрын
THAT is what I am talking about.. very nice,.. SUBBED!
@ConceptCraftedCreations
Ай бұрын
Thanks man!😎 Glad you liked it and thanks for the support👌
@Mavrik9000
Ай бұрын
Dude decided he needed a scooter with after burners!
@ConceptCraftedCreations
Ай бұрын
😎
@danilolattaro
Ай бұрын
there's something wrong with the charger you're using. It's a 13s2p battery, full charge voltage should be 54.6V You are missing a whole lot of SoC there
@stubby7934
Ай бұрын
Glad I'm not the only one in the comments concerned about battery balance.
@ConceptCraftedCreations
Ай бұрын
🤓
@kersgames6382
Ай бұрын
Now that's een mooie applicatie!
@ConceptCraftedCreations
Ай бұрын
Thanks😎
@marciopdcosta
Ай бұрын
Great content :) Could you provide the reduction ratios for the different gears you have tested?
you can change software on ur m365 and it will go 34 km/h with all stock parts easily
@ConceptCraftedCreations
Ай бұрын
Thanks! Did not know that.. Will definitely look into it👌
@friskydingo5370
Ай бұрын
Nice video 👍
@ConceptCraftedCreations
Ай бұрын
Thanks! Appreciate it👌
@andrewchristiansen8311
Ай бұрын
5:19 I love your content but my dog HATES those "Dings" you keep editing in. Please stop using that and never use the 1000hz tone to cut scenes as it can set off peoples gear and scare my GSD. She has bad hips so stuffs hard for her. I build 3D printers in Detroit USA. Stuff with AC relays and AC heaters & MIC-6 beds. Anyway keep up the content. Inspiring my mid drive ebike build.
@ConceptCraftedCreations
Ай бұрын
Thanks for the feedback! Will keep it in mind👌
@ThePCPitStopInc
Ай бұрын
Enjoyed the video but saw no mention of giving credit to Great Scott's footage. I did see his watermark but no mention of him would be careful of using other content without their knowledge. Seen that in the model train community recently.
@ConceptCraftedCreations
Ай бұрын
Thanks for the feedback👌 I thought the watermark would be enough (sort of) But i will add a extra mention in the video description!
@VirKap99
Ай бұрын
Nice video. Can you make an E-Bike from scratch one day?
@ConceptCraftedCreations
Ай бұрын
I added it to my list with possible future projects👍
@blitzar8443
Ай бұрын
Saddens me to not see a intricate gear assembly with many moving parts 😢
@ConceptCraftedCreations
Ай бұрын
And is that based on my previous projects or is that just what you would like to see in a video?🤓
@XypherOrion
Ай бұрын
An Electric Scooter CVT. Nice.
@ConceptCraftedCreations
Ай бұрын
💪
@ArraxShadowfang
Ай бұрын
Try and make a CVT for the motors
@ConceptCraftedCreations
Ай бұрын
Would be an interesting project! Maybe a fully 3D printed version?
@ArraxShadowfang
Ай бұрын
@@ConceptCraftedCreations I would love to see that happening Optional: Why not name it the Arrax drive afterwards hehe just kidding Anyway would love to see you try and build one
@ConceptCraftedCreations
Ай бұрын
@@ArraxShadowfang I think it's a good one.. 🤓credit where credit is due, right? Let's agree that if I manage to make a working version, I promise to call it the Arrax drive in the video! Named after the person who came up with the idea.. And to be honest.. I also think Arrax drive sounds cool! 😎
@ArraxShadowfang
Ай бұрын
@@ConceptCraftedCreations Love it and it would be fun to watch By the way do you have a discord server if not you should make one.
@nathanieltomkins1841
27 күн бұрын
Or u can use 3000w eskate motors
@johntheux9238
Ай бұрын
Can't they just add a gearbox and use a much smaller motor?
@ConceptCraftedCreations
Ай бұрын
it is possible👌But much less efficient
@Creative_Electronics
Ай бұрын
Nice video :)
@ConceptCraftedCreations
Ай бұрын
Thanks man👍
@maciejjanus7904
Ай бұрын
I have entered this video to say i have just put second motor on the rear which was cheap and easy to do
@ConceptCraftedCreations
Ай бұрын
Good one! And did it also increase top speed?
@maciejjanus7904
Ай бұрын
@@ConceptCraftedCreations mostly torque however i cannot compare one to one since i also replaced drivers for flipsky 75100 and even on the same voltage speed was increased due to clear sinewave so with two of them at 10s i got about 40-45 km/h measured by gps however with 13s battery i got to 65km/h (i had to use 14s with single motor and old driver in order to drive around 45km/h)
@Shapshapper
Ай бұрын
If only batteryhookup was an EU company
@fallingwater
Ай бұрын
We have NKON. Not *quite* the same deals, but there are some pretty good ones on occasion.
@ConceptCraftedCreations
Ай бұрын
Sorry! Unfortunately I can't do anything about that🤔
@Motorizedstuff
Ай бұрын
This will cause fire when you have cells discharging at different rates
@ConceptCraftedCreations
Ай бұрын
It is indeed not recommended for long-term use, but for this test alone it is not such a problem, I thought🤓
@RustyleSuper
Ай бұрын
Мне нравится как текстуры асфальта прогружаются по мере движения. Это доказывает что мы живем в матрице.
@ConceptCraftedCreations
Ай бұрын
🤓
@VinWij
25 күн бұрын
Is there a reason you use American units rather than metric? You clearly are Dutch, live in the Netherlands, so using km/h, kilograms and the rest of the metric would make more sense for the largest part of the world.
@hexidev
Ай бұрын
Waarom doe je alles in mph als je Nederlands bent 😅
@ConceptCraftedCreations
Ай бұрын
De reden daarvan is omdat 70% van de mensen die mijn video's tot nu toe heeft gekeken uit de verenigde staten komt😅
@david_liptak
Ай бұрын
Where do you have helmet
@ConceptCraftedCreations
Ай бұрын
I forgot🤔
@docmalc47
Ай бұрын
Should've used your speedbot to record your speed 😂
@ConceptCraftedCreations
Ай бұрын
Combining each new project with the last😄
@docmalc47
Ай бұрын
@@ConceptCraftedCreations lol a daisy chain of creation ecosystem 😂
@austinspor2558
Ай бұрын
I would love to get the stl files to try it myself.
@ConceptCraftedCreations
Ай бұрын
I can upload them to Cults if you want?🤓
@austinspor2558
Ай бұрын
@ConceptCraftedCreations that would be awesome. I would love to try it as transportation is always important and money is not always available to take us where we want to go.
@austinspor2558
Ай бұрын
@@ConceptCraftedCreations what kind of scooter is that you are using?
@jordi20180
Ай бұрын
@@ConceptCraftedCreationsyes pelase, could you tell me the name of the stl files or how to search them ? Thank you, Great video
@viperdio69420
Ай бұрын
Gawd damn
@ConceptCraftedCreations
Ай бұрын
In a good way or a bad way?😄
@Nion1957
Ай бұрын
Good mind . Thank you .
@ConceptCraftedCreations
Ай бұрын
Thanks for the support👌
@ZOMBIEEZ
Ай бұрын
this wont boost the speed in anyway as the speed is software locked and wont just go faster cause u added some drone motors to it,, ur more likely to completely destroy ur scooter battery by doing this.. never do this..
@ConceptCraftedCreations
Ай бұрын
So you are saying that when i drive downhill the scooter slows down?
@ZOMBIEEZ
Ай бұрын
@ConceptCraftedCreations do u know physics? Of course, if u drive downhill u move faster but its not under the scooters own power its called downwards gravity ur not going faster under the scooters own power therefore your not faster.
@ZOMBIEEZ
Ай бұрын
@ConceptCraftedCreations the drone motors are not a good addition caue of the power hold your just going to damage your scooter that way, if u want to unlock your scooters max speed use custom firmware like everyone else does its the safer method
@paradiselost9946
Ай бұрын
the power rating of most BLDCs is the electrical power CONSUMED. NOT the SHAFT output. but, as always, we shall forget important facts like that when making these pointless types of videos.
Пікірлер: 116