For perspective, even an advanced builder might take weeks or months to design, build, and test this. Then there's the cost in terms of bricks, motors, and batteries. Truly, the most valuable investment is the time in post to make the stop motion. This is a labor of love and a work of art! Side note: can't anyone just enjoy this without adding their own suggestion? Just my $1.02
@BuilditwithBricks
Ай бұрын
Ah thanks for commenting and for the support! I really appreciate it! And your right - stop motion takes an age!
@JessterTheFifth
Ай бұрын
Awesoke build, but my only concern are the corners inside the lazy river. There are 3 that are large enough for the flow to turn into it's own whirlpool. I saw that the lower half had some texturing, increasing the height and width of it to over the water line would allow more riders and less pile-ups. Every lazy river ive seen/been in never had a corner for that reason.
@BuilditwithBricks
Ай бұрын
Yeah - 3 little whirlpools did develop - I thought they added to the gentle nature of the ride! If I had more space to build a bigger box (the one in the video is around 1.05m x 1.05m!) then I would definitely have smoothed and curved the corners more to create even better flow! Thanks for watching!
@LegendaryCursor
Ай бұрын
that one unemployed friend on a tuesday morning:
@DREDD_BOT
Ай бұрын
unemployed friend is old
@nihilconsortium5518
Ай бұрын
I would have liked to see the same structure, but with a little difference in level between the start and the finish (with a conveyor belt to raise the tires). And then, putting the water inlets of the pumps towards the outside would surely improve the continuity of the water flow. But these are only details and the video is great!
@BuilditwithBricks
Ай бұрын
Hi - I have literally made this ride in another video called ‘I built a LEGO Water Park Rapids Ride!’ Take a look and see what you think! Let me know in the comments..
@dravermangaming7404
27 күн бұрын
@@BuilditwithBricksI'm not him but it's cool
@nihilconsortium5518
26 күн бұрын
@@BuilditwithBricks (If I sound weird, it's because I'm using Google Translate) I just watched it and it's even better than I could have imagined! Honestly, what you're doing is really really cool!
@jc7241
Ай бұрын
Cool but could be much better using slopes and wedges for better water flow! Let’s see V2!!!
@Chadmiral
Ай бұрын
I used to work at a waterpark,I can't imagine the lazy river over there having a 7 person capacity 😂
@BuilditwithBricks
Ай бұрын
Hi, thanks for the comment! Yeah - they can get pretty wall-to-wall, can't they! Especially at the tube pick-up / drop-off points!
@natsunaorathegodofillusion7915
25 күн бұрын
That is one COLD AF lazy river... XD
@mitchib1440
Ай бұрын
One of the things you could do for future water+lego stuff is add some pepper to the water (or some food colouring I guess) to visualise the current a little better :)
@BuilditwithBricks
Ай бұрын
Hi! Thanks for the comment - I did consider food colouring etc. but then I thought about the effect on the thousands of bricks and decided not to risk it! Maybe I could experiment with a few to see if it stains and incorporate into any future LEGO / Water videos down the line!
@mitchib1440
Ай бұрын
@@BuilditwithBricks if you use small grains like pepper, it won't do any damage. Best do some small scale testing though, good idea.
@markc.7984
5 күн бұрын
Hmm, maybe bring the outlet of each pump around and behind the inlet to remove those "dead zones" between inlet and outlet where the floaters can get stuck, or even go in reverse.
@theknexpert
Ай бұрын
This is super cool! An entire waterpark build next would be amazing...
@BuilditwithBricks
Ай бұрын
Ah thanks! Maybe at some point in the future…..
@bricklejar
16 күн бұрын
You have must made 8 year old me extremely happy. Well done.
@LegoBoomSG
Ай бұрын
I love water park and its nice to see a water park made by lego
@BuilditwithBricks
Ай бұрын
I'm glad you enjoyed it!
@DungĐoànPhương
12 күн бұрын
Amusing! Now go for speed!
@aslamc9288
Ай бұрын
Amazing that you can build all this in under 10 minutes. It takes me longer just to do a Battle Pack! (I’m just kidding, I know this isn’t real time)
@BuilditwithBricks
Ай бұрын
I’m just super efficient!
@AdamJ03
Ай бұрын
Awesome!
@BuilditwithBricks
Ай бұрын
Thanks!
@de-bodgery
13 күн бұрын
Amusing! Now go for speed! 1. Your inlets need to be low to the bottom so they don't pull in surface water near your "riders" and slow them down. 2. Put in water ramps so that water flows up and over things more smoothly. 3. Corners are whirlpools that trap "riders" and slow the water down. 4. Pump outlets are too turbulent. See if you can get the water flow to become more laminer.
@gascogne3622
Ай бұрын
ADD SOME SAND AND PLANTS PLS
@BuilditwithBricks
29 күн бұрын
My last video was all about moving sand with LEGO - after that clean up I wasn't in a hurry to use sand and LEGO together for a while....Thanks for commenting!
@gascogne3622
29 күн бұрын
@@BuilditwithBricks o np, i meant like tan yellow bricks and a lot of lego plants and trees to make the river a lot more vibrant
@gascogne3622
29 күн бұрын
@@BuilditwithBricks OMG and maybe like a bridge or arcway somewhere along the river as well for the minifigs to go under
@GaryTheGoose884
12 күн бұрын
I would have made at least the island sand coloured and add some more little builds around it like trees or a little hut, but this is still cool either way!
@itsmelankysus1234
23 күн бұрын
i used to build Lego marble tracks ONLY THAT.
@Retrobricks
Ай бұрын
its a hot day in my country and im happy to seee this video, chill vibe
@Darkhunter190able
22 күн бұрын
A couple notes: Obviously the elephant in the room is that legos are a) not watertight and b) bouyant, but that aside. The widening of the channel in front of the medium pump slows down the water significantly, due to Bernoulli's principle. When the slow moving water there meets the fast moving water at the outlet, this creates a circulation effect known as a hydraulic jump, potentially trapping minifigs. Additionally, the sharp corner splits the flow, exacerbating the issue. Addint the weir after the large pump causes a similar issue with recirculation. As an example, look at the crystal river in Schlitterbahn's 'blastenhoff', in my hometown of new Braunfels - circulation is provided primarily by runoff from the boogie board ride, which pumps, at high velocity, tens of thousands of gallons per minute to create high velocity flows, which then creates a hydraulic jump shortly before it reaches the river. The intakes are typically very large, numerous, and low flow to prevent localized areas of stagnation, as you want all water to reach the treatment plant and pumps several times a day (this is for hygienic reasons). There is actually a lot of science involved, so weeeee! Also, weirs (a dam in which the water is designed to overtop the structure) are among the most dangerous structures in open channel hydraulics, and are therefore typically avoided in waterparks.
@BuilditwithBricks
21 күн бұрын
Hi thanks for the detailed comment! Some great fluid dynamics knowledge there! The level of engineering design that goes into waterpark rides is pretty awesome!
@Darkhunter190able
21 күн бұрын
@@BuilditwithBricks kzitem.info/news/bejne/mKqgzGx-kJuDZo4si=IqSFvueTFO2FUr6R Grady at practical engineering has a bunch of videos on open channel hydraulics
@MetalchipCovers
Ай бұрын
This is really cool! I see that the scale of these builds and the still good level of bricksmanship sets this channel apart well 😊
@BuilditwithBricks
Ай бұрын
Ah thanks for the kind words! Glad you enjoyed it!
@MetalchipCovers
Ай бұрын
Thanks 😊@@BuilditwithBricks
@TheEmeraldWeirdo
29 күн бұрын
I think it might have worked better if there were fewer right-angled turns. If I remember my physics correctly, that sort of thing weakens the current. Maybe add some of those macaroni bricks to those areas?
@BuilditwithBricks
29 күн бұрын
Hi, thanks for the comment! Yep, smooth corners work best but I was dealing with a fixed area in which to build which made the turns pretty tight!. You'll notice under the water the turns are relatively smooth in places which helps water flow. Fluid dynamics is pretty interesting!
@EasyMachine
Ай бұрын
Incredible content as always! Keep up the great work!
@BuilditwithBricks
Ай бұрын
Thanks! Will do!
@jonwundersitz1650
8 күн бұрын
So cool - love the build. Where did you get the clear box from?
@BuilditwithBricks
7 күн бұрын
I made the acrylic box! It took as much effort to build that as the LEGO build took!
@SmartLegoSG
Ай бұрын
Wow, this video is amazing! I learned so much from it. Keep up the great work!
@brickaversion
Ай бұрын
Nice !1
@EricInTampaAcoustic
29 күн бұрын
nice!!!!
@mebluewater
Ай бұрын
Can you mail the larger one and put it in my backyard? Lol
@timpie9346
Ай бұрын
Apparently just two are enough to block the flow - if they are in the wrong place at the same time.
@BuilditwithBricks
Ай бұрын
Yes! You are correct - I ran out of room to have it any larger! It was a challenge to get it this big.. With 7 minifigs they never really got that close together however so this became the ‘max capacity’ Thanks for watching!
@timpie9346
Ай бұрын
@@BuilditwithBricks It was a pleasure to watch!
@rustysshorts
29 күн бұрын
needs water to spray at the Legos
@throwaway-lo4zw
10 күн бұрын
can someone tell me how he does this transition thing at 2:18 where the blocks are being placed? like how does he hide himself from the camera?
@75YBA
15 күн бұрын
Cool, but LOUD.
@dragonskull1447
8 күн бұрын
What motors did you use?
@BuilditwithBricks
8 күн бұрын
A combination - BuWizz motors and LEGO Power Functions / Powered UP!
@Kaffelop
23 күн бұрын
Why fill water on the outside? Was curious to see if it was water right 😮
@SomneStudios
23 күн бұрын
Lego builds aren’t watertight. That’s why the boats have single piece bases.
@hung1996cali8
14 күн бұрын
Thanh you veruly muck
@we5tbevryertyv
27 күн бұрын
Fan request: 10 hour video of the fast forward clicking sounds.
Пікірлер: 78