It's insane to think that this is the same car you started building back when you still made forza videos, coolest miata on the site
@Avetho
Жыл бұрын
Molly is... _eternal._
@nabilkurtoglu558
Жыл бұрын
Facts ya remember Fred??
@wowdogeful
Жыл бұрын
@@nabilkurtoglu558 yoo his mom's Focus he riced out on the channel😎😎😎
@AM_ENTERPRISES.209
Жыл бұрын
The forza the ford focus so much went in to where he is today!
@craigpearson9063
Жыл бұрын
I dunno have a look at Jimmy broadens time attack miata that's a beast
@318isGood
Жыл бұрын
My guy you went off with the edit; the musicality and flow is great. Keep up the awesome work.
@318isGood
Жыл бұрын
**Are great. Everything IS great lol
@Blurgamer17
Жыл бұрын
@drew9804 my mind autocorrected "musicality" to "masculinity." Lmao.
@Deceiver935
Жыл бұрын
I felt the same way!
@coreyjohnson993
Жыл бұрын
Always love the videos, but the editing on this one was especially entertaining. Also, would love a spotify of the background music.
@TerranRedsky
Жыл бұрын
It sounds awesome and it looks great, not to mention it looks super sturdy. Could always apply some heat to the exhaust tips to give them the blue heat colouration, would match with the paint :D
@arlojackson6073
Жыл бұрын
I love how you always start off relatively clean and up up with dirt all over 😂 very relatable
@NXT_LVL
Жыл бұрын
19:15 The way you had it is the best way, having a straight shot to the valve when open. I've seen some that actually have two valves, so it seals the one off so you don't get any "leakage" It would be way more noticeable if it was up front rather than out back. But its a cool way to have a dual-purpose exhaust...
@Scuffed_Gambit
Жыл бұрын
Mans made the NA into an NC with the dual exit. But with jokes aside, this build is awesome 👌
@coalblack
Жыл бұрын
Bro exhaust looked great!! You can get some stainless wire for your mig welder. Some machines want to to change polarity. For tacking pieces in in position it's a lot easier. Then drop it purge and Tig. .love all your vids brother, can't wait to run into at an event someday. Keep it coming!!
@MotorStorm
Жыл бұрын
Only thing it would need now is a proper diffuser
@hijodelodi9489
Жыл бұрын
OH MAN I CANT WAIT FOR THE NEXT VIDEO!!!!!
@ManchusTech
Жыл бұрын
Think it might look kinda cool if you did a slash cut on the tips so they flow with contour of the rear bumper a little more IMO. Just my opinion though, great vid as always.
@MattWaller04
Жыл бұрын
Molly the Miata is an absolute masterpiece.
@TKDPandaa
Жыл бұрын
loved this video, you make working on cars look fun LOL
@official.operator_za
Жыл бұрын
3:15 I miss the eclipse
@diegoalvarez6861
Жыл бұрын
Sounds sick!, can't wait to hear it at full throttle!
@noahkuria19
Жыл бұрын
3:11 R.I.P mid chassis converted red eclipse.
@madmiata1887
Жыл бұрын
I put a MagnaFlow 12589 on my turbo miata and drone was completely eliminated. It's a massive muffler. I'd like to see you install that and a cutout :) You will have sleeper quiet with great flow and race mode.
@jetcitykitty
Жыл бұрын
I saw you and Dave in your Volvo on his channel, so I subscribed! 🤙
@BigIsleJ
Жыл бұрын
I enjoyed your effects in this one :)
@handle690
Жыл бұрын
I'm all in on this Miata. This thing is a friggen gem!
@brokeafengineerwannabe2071
Жыл бұрын
Seems like the camera man(sorry I forgot your name) had a fun time editing the metal cutting
@joshuafrost6496
Жыл бұрын
Not that loud. Just amazing none the less!
@timothystrunk7323
Жыл бұрын
Sounds amazing
@mastercricket7626
Жыл бұрын
Sounds awesome to me bro n Tbh I kinda dig the muffler setup maybe cus I daily a hood dump but either way sounds great n looks really good to bro clean install n no 2 foot stickout dumb crap lol
@colinjackson2465
Жыл бұрын
Props for having good music in your videos and not recycling the same damn song!
@Rellek
Жыл бұрын
Maybe get some actual exhaust tips, I think it looks kinda unfinished from behind
@MediumHalf
Жыл бұрын
I think they'd look good if he just polishes 'em up
@natepotter1709
Жыл бұрын
Polishing just the tip?
@MediumHalf
Жыл бұрын
@@natepotter1709 💦🍆
@MBI-STUDIOS
Жыл бұрын
Much love from Nigeria ❤
@SpecialFXKing
Жыл бұрын
Thou hath mad skillz
@garageworm17
Жыл бұрын
Mattman made 588 on that motor your not going to hurt it anytime soon 😂😂😂😂 I still have a picture of turtle with your motor in it
@bluestripes1
Жыл бұрын
change the muffler to a smaller ID to make it quiet!
@BrysonChyoChing
Жыл бұрын
Waiting for the new 1UZ exhaust setup for the pickup
@BennisMaximus
Жыл бұрын
dude's living NFS Underground IRL
@OgAbstract
Жыл бұрын
what are your wheel/tire specs if you dont mind? that thing really be sitting perfect!
@FRITZI999
Жыл бұрын
Awesome work ! 🙂
@gabichone2319
Жыл бұрын
It would be so much clean, if you guys put some tip on the end... Just to give a more clean look
@turd4842
Жыл бұрын
sounds like a saab!
@jamiefarrell8371
Жыл бұрын
Love the edit on this vid
@erikborg5891
Жыл бұрын
Any reason why you didn’t back purge?
@ashtonwoods9644
Жыл бұрын
W video
@SadisticKid.
Жыл бұрын
Blue Betty. Can I get that dust pan on Amazon?
@MartijnGizmo
Жыл бұрын
Just be careful to write “pink flashlight” with an a!
@timvanderstarre9021
Жыл бұрын
4000rpm 50mph?!😂
@waffleown4258
Жыл бұрын
Please add catalytic converters on your cars
@perfectentrytrading
Жыл бұрын
Why would you do that
@vtfreerider07
Жыл бұрын
lmfao.
@Toasty_Boi73
Жыл бұрын
no
@jakehamilton5894
Жыл бұрын
Why would you want to do that
@waffleown4258
Жыл бұрын
@@jakehamilton5894 to burn of excess fuel in the exhaust, so the particles won't get pumped out in to the air.
@typedrew
Жыл бұрын
On a valved setup the ‘high flow loud’ side should take airflow priority and the ‘quiet’ side should take a 90 degree angle out of that pipe with a smaller piping diameter. It’ll greatly improve drone characteristics and it’ll make it much quieter without having to use even more additional mufflers. And if you place the valve closer to the tip of the high flow side, it’ll also act as a Helmholtz resonator when shut. Love the content just hope this may help if you ever want to improve the db difference between modes.
@TheRogueBro
Жыл бұрын
Ya, i was honestly surprised he didn't (at the very least) get a Y-pipe for the back.
@yuGtahT
Жыл бұрын
The fact that the Eclipse scars are still just sitting there in that intersection is _wiiild..._ I wonder how long it'll take for those to disappear, or if they'll just need to repave the road.
@Avetho
Жыл бұрын
Its like a morbid reminder to double, triple nay, _centuple_ check literally everything if you're not entirely certain that everything is working as it should with like a double margin for error, changing conditions and faulty components. It was going to be a super cool project but bad luck, unfortunate part placement and the curse that seemed to be saturating the vehicle killing engine after engine all conspired to ruin the day. The only good thing that Eclipse seems to have done for Caleb is taking away basically all his mechanical misfortune for at least the next decade. But yeah, heck, seeing the burn scarred asphalt is still visible is definitely wild as all get-out.
@puskunk
Жыл бұрын
It's Georgia. It will be there for the next twenty years until GDOT repaves it.
@HondAcura111
Жыл бұрын
Near Ottawa Ontario on a back country road someone hit a deer I'm guessing and there was a giant patch of red like 30 square feet stained into the already faded grey pavement. It was there for atleast 4-5 years before the road was paved lol
@sjorsangevare
Жыл бұрын
Oh it'll be there until it gets repaved. My parent's van burned down right in front of our house in 2010 and the scars are still there. Quite faded, but definitely still there.
@Vasquezz28
Жыл бұрын
Totaled a car when I was in high school and the marks the rims left on the pavement are still there after 10 years 😁🤙🏼
@willwastaken
Жыл бұрын
If you want to reduce drone, I highly recommend swapping out the bottle resonator for a Vibrant Ultra Quiet resonator. They reduce drone so much it's insane, but they don't decrease volume too drastically. Also, what a fantastic video this was. This has to be the best production quality yet!
@jakehiggins5118
Жыл бұрын
I can confirm, when I had a mazda 3 with a loud exhaust I installed the vibrant resonator and it almost eliminated the drone and didn't change the exhaust tone too much
@danyfry39946
4 ай бұрын
@@jakehiggins5118did it help with any rasp?
@scotthartwig7190
Жыл бұрын
Here's my only suggest for welding stainless, be sure to back purge the piping to prevent "sugaring". It can cause the backside of the weld to be full of impurities and can increase the chance of weld failure, especially on an exhaust where it's getting a TON of vibrations.
@killainmaccallan4700
Жыл бұрын
yep that was going to be my 2 cents as well, I used to love TIG welding stainless steel, I hated Cunifer the most and aluminium
@TheCarPassionChannel
Жыл бұрын
I miss my cutout system so much 😭 such a rad setup for the street
@_Gingium_
Жыл бұрын
My cutout already broke 😭 what happened to yours?
@jv6miata
Жыл бұрын
Gingium, TheCarPassionChannel, AND ChrisFix all in one day? This really is Christmas in early August
@Avetho
Жыл бұрын
If you want to make the quiet mode really quiet so the loud mode is full power, using a triple chambered reactive muffler from MagnaFlow might be an idea, and size it to like a half inch smaller diameter than the exhaust, so 2.5 inches (the XL 3 Chamber is like 130 bucks so I don't know if that's cheap or not), that should make Molly real silent with the valve closed, and if you could set that valve to also open when boost pressure gets high enough then you could let Molly breathe if you hit the gas, and still have the manual open as an override so it just stays open regardless of the boost pressure. Molly though, she's sounding _hella fine_ now I also just learned now about diffuser disc mufflers, you add discs to the stack to let air pass more freely and more loudly. They're those strange exhausts where the gas comes out the circular outside instead of straight on, some generators or other small engines have them if they don't just use one of those boxes plonked on the side, I saw a guy put a 4 inch one on his straight-pipe Jeep and with 12 discs it was 9db quieter at idle, and 24 discs was only 5db quieter. Mufflers are fascinating things, there's like over a dozen different designs, but the chambered muffler aka the reactive muffler seems to be the best at being quiet, more chambers more quiet.
@tim3622
Жыл бұрын
Holy shit, love the vibe, the vid, the workshop, the welding and the car this video is soooooo niceeeeee😮 you made me wanna turbo charge my "98" NB😂
@jordanrobinson7961
Жыл бұрын
Thought you stopped posting… turns out KZitem just hasn’t recommended your videos to me.. have 9 videos to watch now to catch up 🤦🏻♂️
@joshuapereira3787
Жыл бұрын
GOOD MORNING BEAST GINGUM MOLLY KZitem CANADA ONTARIO VIDEO 🇨🇦🇨🇦🌿🌿🍀🍀🐈🐈
@bennet2103
Жыл бұрын
Have you ever considered getting a Fastback hardtop? I’ve always thought that they look amazing on NA Miatas and It would fit the more sporty/track esthetic.
@Drunken_Hamster
Жыл бұрын
Rip Eclipse. Also, if you want a positively stealth mode muffler for the quiet side, I'd suggest a Dynomax P/N 17676. It's only 2.5" but it'll tuck into and fill all the space where the one tip is, and then you could run a setup that kinda looks like a sideways pi symbol, with the end splitting off into a dual "center" exit tip that snakes around your jack point. Or a double blast pipe out one side, or just back into a single exit. If not, and you wanna keep it 3-inch, look into a 17743(smaller body) or 17792(larger body). ALL of these are turbo-style (looping pathway) mufflers, witth the first being 1 loop (inlet and exit on the same side) and the latter two being two loops with an offset/offset design on opposite sides.
@802Garage
Жыл бұрын
I think you've been watching too much This Old Tony, hahaha. Great work!
@andyvang6549
Жыл бұрын
You try ptfe tape instead of blue painter tape cause you can weld over it and it doesn't leave glue behindc
@jv6miata
Жыл бұрын
3:21 The 7th gen accord coupes NEED more attention from Gingium plz
@thatkidwyatt8270
Жыл бұрын
That would be cool to see, but i think the Fit is taking the cake for Caleb. All that power and fwd isn’t great sometimes, especially on a track
@_WadeBuchanan_
Жыл бұрын
Sounds pretty good, but I'm not a huge fan of the unfinished look. I wonder what could be done to pretty up the tips without them looking out of place/worse.
@zwift9229
Жыл бұрын
Dont know if anybody else wants this, but can you try with one video where u dont add any music while working on the car? just so we get the asmr from wrenching, welding etc?
@JamieBainbridge
Жыл бұрын
Some great arc shots in this 👌
@limesta
Жыл бұрын
someone looks like they are getting ready for a flat bottom 👀👀👀
@spaight711
Жыл бұрын
Once you get that rhythm going with the tig pulse and your setting dialed in, it all just comes together.
@jhubbell0385
Жыл бұрын
Idk if any are near you but autozone sells and rents pipe expanders
@nicksimadis2086
Жыл бұрын
My favorite Miata.
@mattreardon5648
Жыл бұрын
man i miss the eclipse. i hope someday you try again with a mitsubishi
@rachelpurity1
25 күн бұрын
You know, the flap is supposed to be used THE OTHER WAY AROUND. When you're in town, you can quieten it down, not bother everybody and when you're out and about on the highway or some far out roads you can make it loud.
@cinocv
Жыл бұрын
the welding editing was ON POINT. great video
@cheekyjay2463
Жыл бұрын
Gingium, if you ever sell this car I will fly to the US and smak u
@_Gingium_
Жыл бұрын
Don’t worry, I’d smack myself too!
@ZachSmith-gm4sq
Жыл бұрын
Gingium, stop buying junk harbor freight belts. Look into combat abrasives, reach out for a sponsorship maybe? I promise (as a beginner blacksmith) I tried the HF belts and it’s so bad in comparison to a good belt. I have Combat Abrasive belts that last 10x times longer and they are very affordable
@_Gingium_
Жыл бұрын
Interesting, I’ll have to try it! I was always upset at how quickly these belts got dukk
@_Gingium_
Жыл бұрын
Dull*
@zanthegenius7973
Жыл бұрын
Press like on the video to pay your respect to the Mid-Engine Eclipse
@3nd3rn1ght
Жыл бұрын
You should get an IRP shifter.
@_Gingium_
Жыл бұрын
Yes I agree with that!
@joeethereal2968
Жыл бұрын
Exhaust pipe Tuba rendition of "Axel Foley Theme" track by Harold Faltermeyer featured on the "Beverly Hills Cop" movie soundtrack album.(circa 1984)
@billi5920
Жыл бұрын
I hate the fact that you have perhaps the 2 of the best looking Miatas in the world and u choose to drive that abomination called " fit " YOU'RE THE MIATA OG I came to love Miatas cuz of u
@minibikemadman
Жыл бұрын
ouch watch out for that turbo..look at all the issues Calvo has had with em..wheels exploding etc...id stay far away from em and stay with a Garrett.
@joshmiller1141
10 ай бұрын
They sell an exhaust pipe expander kit at harbor freight. $60 when I bought mine. You just use an impact on a screw that expands it.
@SpaceEngineerErich
Жыл бұрын
Very impressive. I had to cut and TIG weld exhaust tubing in Fab class and it was an epic fail. My worst grade in the class.
@TylerRogersUSA
Жыл бұрын
Never a bad idea to wear a respirator when welding stainless. Hexavalent chromium is no joke
@tylercagle9785
Жыл бұрын
I thought you said editing quality would decrease as amount of videos has increased. Every single one has been better than the last, still my favorite youtuber. Loving the extra content btw.
@2GSpyderTurbo
Жыл бұрын
Do you recommend using the steel cutoff vs an abrasive blade? I'm sure there will be a big divide on this, but before you come into this comment about either, give me reason why you have the opinion you do. :)
@1993Revhead
Жыл бұрын
Low key loving molley content.
@shannonm3299
6 ай бұрын
I enjoyed watching your video and the cuts you were making for the piping looks nice and clean!
@votive7478
Жыл бұрын
Why are you using such a large cup for steel? Also glad to know I’m not the only one that says “god damn fuckin thing” lol.
@rhodeysi6067
Жыл бұрын
Any other stainless welders cringing at the sugaring….. Not to hate on the welds, just bothered by the lack of shielding gas inside the pipe
@toxicmasculinity7870
Жыл бұрын
Man, I hope Gingium keeps that 240. That there’s some potential for a neat project in the future.
@HaileyThiccc
Жыл бұрын
I've been watching you for a few months and I can't stop thinking that you look like Christian von koenigseggs long lost son
@SnD340
Жыл бұрын
Everyday I miss the FC. Only reason I subbed and I mean only reason.
@backtothegrid3531
Жыл бұрын
something very similar I've been looking to do to my stagea, full system. Cat, res, to a rear muffler but also have a cutout just after the cat that goes into a boom tube muffler out the side
@douchedidit9222
Жыл бұрын
Bro I laughed my ass off when u pulled up at the light with the camera at the intersection I was like that looks like the spot the car burned down at and u turned the camera around and said that where the car burned down lol I’m sorry buddy lol
@ubeherelongtime
7 ай бұрын
Dude you got a 500hp built motor from the turtle miata detuned it and ended up putting a bigger turbo on it????????
@rambo6375
Жыл бұрын
It just shows..having the best welding machines and helmets and tools doesnt make you a welder
@MrCox-ev8zo
Жыл бұрын
it’s so wild dude that last road is so close to me. the 11s on the road by the racetrac are me bro 😂😂😂 i remember hearing you run down that road 😂😂😂
@jonasmarotta8195
Жыл бұрын
Haven’t watched the whole video quite yet but I just had the thought that Molly should get a flat bottom, or at least a partial flat bottom with naca ducts and all that good stuff that race cars have
@james10739
Жыл бұрын
Are the harbor freight belt sand paper any good i would think there is much better stuff out there that is a better value i mean cost more but last much longer
@Jarok3
Жыл бұрын
dude is using a milwaukee marker, this is a man of culture and knowledge. you got my respect :p
@BigblackRN84
Жыл бұрын
Call me crazy but I think you should do an eclipse v2
@joshmiller1141
10 ай бұрын
I bought a custom momentary switch that says hood neighbor and bad neighbor.
@thatkidwyatt8270
Жыл бұрын
honestly cannot believe i’ve been watching this channel since i was 11 (i’m almost 18)
@thomascampione8866
Жыл бұрын
*air filter on the exhaust* The EPA hates him, find out what he did with this simple trick
@insubordinateandchurlish_
Жыл бұрын
I built myself something similar to this and i have to agree.
Пікірлер: 223