Awesome job it's nice to see somebody lift a Suzuki.
@Coryphillips1999
2 жыл бұрын
Thank you!
@xxtjbugattixx8945
Жыл бұрын
Where do you buy a lift for this, I cant find one anywhere
@erickchairez4159
6 ай бұрын
Did you ever find one? @@xxtjbugattixx8945
@andrewaikens5624
4 жыл бұрын
By the looks shes a 1999 300 had the exact same one miss it till this day you made my day when i seen this props to you man thats deadly
@robsim4692
2 жыл бұрын
You mean by the looks of it she's a 1999 300 plus the fact he said it was 1999 300 at first of the video means it must be a 1999 king quad 300! Just tell the truth, you've never even owned a quad have you? You're just in the comments trying to fit in with everyone because quads just like Trucker's butts drive you nuts! Nobody likes a liar! If you're not exactly who I described then it's simple enough to chump me as a fool, let's see pictures or video of you and your quads! Can't be your kid's Chinese garbage you kicked them off of and slammed your half-full beer can down saying, damn it Jimmy Ray Jr. Daddy's got to get his pictures made with this Ducati 4 wheeled sportbike impala. Your sister gonna take the pictures so go tell your momma to get ready because you know what quads do to daddy and uncle Larry is gone back to prison! I'm just joking, you ain't seen your kids in years because according to you their momma blocks out your sunshine, which is mean and ridiculous, 602 lbs certainly wouldnt block out the sun! So picture's that are real or just drink your Black Label brand beer quietly until you stagger into the bedroom of that poor woman you picked up at a homeless shelter or your local V.B.A!
@davidjarriel5182
2 жыл бұрын
Can you do an updated video of the king quad in the mud in super low so we can see how it does? I seen the one where you bought it back. It would just be nice to see how it performs in the mud now that carb. Issue is resolved.
@marcowens-gq5sy
Жыл бұрын
Them old king quads in super low would pull any size tires them things were tanks!
@ryanechols8920
3 жыл бұрын
Haha nice!!! I bet you wouldn't have guessed that this video would generate that many comments. Your snorkel idea and the exhaust mod has me thinking now. Do you recall the jetting you used?
@Coryphillips1999
3 жыл бұрын
I definitely didn't lol and the factory jets are actually fine as it turns out, the carb just ended up getting trash in it. Don't use a air filter with that small of piping because it won't run right either.
@cjackfly
Жыл бұрын
Corys are always cool. 😎 I just got one with a winch and plow for $300!
@TriggermanEst91
15 күн бұрын
How did you cut your plastics?
@jerryjoyceoutdoors4625
Жыл бұрын
Can u link Exhaust
@Megadeath39
3 жыл бұрын
Looks like a bit of clutch slip, I like it tho
@austinperiman8410
4 жыл бұрын
Hey man, I have an 01 king quad and I wanna do something like this with. Do you have any tips and pointers?
@Coryphillips1999
4 жыл бұрын
Text me at 870-648-0338
@wilwilliams8414
2 жыл бұрын
Any ideas on cv axels, trying to restore my dads And can’t find front cvs anywhere
@Coryphillips1999
2 жыл бұрын
eBay or Facebook marketplace
@lovelooslivideos
3 жыл бұрын
Is it super bogged down with those tires? Seems like it can barely turn them tires in mud. Or that kid is granny throttling it haha.
@Coryphillips1999
3 жыл бұрын
It had carb issues, fixed them afterwards.
@danielwatson8310
Жыл бұрын
Were did u get the rims and tires from?
@Coryphillips1999
Жыл бұрын
Rims ebay and tires Facebook marketplace.
@noahlarive6185
2 жыл бұрын
Can you send or make a video to where you lifted it and how
@Coryphillips1999
2 жыл бұрын
Look on my channel further up about a year later, I did a multiple part series about rebuilding it more in depth.
@jasonsantos159
4 жыл бұрын
Got same bike. Very similar. Thinking about selling. If you don’t mind me asking. How much did you get for it ?
@Coryphillips1999
4 жыл бұрын
$2,500
@theirishaxe9405
3 жыл бұрын
Are you even using the lowest gear in this video where your just spinning the clutch and not moving? When mine is in super low and diff lock I can spin my 30in terminators easily when buried
@austinhowze6280
3 жыл бұрын
How you get them to fit
@dizzlerizzle2775
2 жыл бұрын
so can it run 28" good and 30"?
@peytonmccosco5712
2 жыл бұрын
Can u make a vid how u built yours?
@Coryphillips1999
2 жыл бұрын
Search through my channel, about a year and a half ago I bought it back and built another one more in depth with the parts from the first bike.
@jonathanolguin1592
3 жыл бұрын
How does it spin em? Better then a Honda 300?
@Coryphillips1999
3 жыл бұрын
Pretty dang good, mine had some carb issues but once I got it fixed I'd compare it to a Honda 300 with a gear reduction.
@williamchavis3534
5 ай бұрын
Well now there’s at least 2 of them
@brodiebeliveau4499
3 жыл бұрын
Can you point me where I can get the wheel adapters?
@Coryphillips1999
3 жыл бұрын
Text me at 870-648-0338 and I'll send it
@ParkerGOR
3 жыл бұрын
What jet did you use in the carb i snorkeled mine and I don’t know what jet to go with ?
@pig_man5622
4 жыл бұрын
What kind of rims did you use and did you use adapters
@Coryphillips1999
4 жыл бұрын
Suzuki Eiger front wheels and eBay adapters
@bb-killa4033
3 жыл бұрын
may i ask where can i find that exhuast i was looking for one for my 1997 king quad 250
@davesrcrepairshop9606
3 жыл бұрын
go to this link www.powersportsid.com/atv/suzuki-lt-f4wdx-king-quad-300-slip-on-exhaust/?offermpnid=4617951420&view=123456&gclid=CjwKCAiA-_L9BRBQEiwA-bm5fnBFy1EovG9FKGDSzWlQ4NsXT6uL8_pRhxu6sLAqybQ9fruq-VouSxoC95kQAvD_BwE they have a slip on muffler. now if its the exhaust pipe you will have to build one your self for buy a used one.. And FMF makes a good slip on muffler too
@Coryphillips1999
3 жыл бұрын
eBay
@TacticalNightBoy
4 жыл бұрын
arent these fourwheelers pretty much stock snorkelled up beside gas tank?
@Coryphillips1999
4 жыл бұрын
Kinda yes but the design is terrible, if water enters the area where the shifters are it's done for.
@TacticalNightBoy
4 жыл бұрын
Cory Phillips I’m replacing my rear end it’s making a noise and my diff is rusted. Can’t find any tutorials anywhere for these things sadly
@jeromestorlie4557
2 жыл бұрын
Have an problems with the drive shafts bc of the lift and any diff or tranny problems because of the same size tire all the way around?
@Coryphillips1999
2 жыл бұрын
Never had a single issue
@jeromestorlie4557
2 жыл бұрын
@@Coryphillips1999 ok sweet thank you
@tiogatech359
3 жыл бұрын
Where did you get adapters at I can’t find any to work with mine if I got correct bolt pattern front is 4/140 and back is 5/160
@Coryphillips1999
3 жыл бұрын
Text me at 870-648-0338
@nathanwilbourn260
Жыл бұрын
@@Coryphillips1999where can I get the adapters at man
@Coryphillips1999
Жыл бұрын
eBay
@JuggaloKing365
3 жыл бұрын
I had one That I put a lift tires and front diff mod with snorkel
@logicskater1185
3 жыл бұрын
He said he found adapters for an eiger, so does that mean those hubs slide right into the spindles on a 300.
@Coryphillips1999
3 жыл бұрын
I'm not sure, I chose to only use adapters and wheels.
@fallenangel9217
4 жыл бұрын
Hi I just got a kingquad as well and am looking to do something similar and want to put mine on 27s if you can what the adapters called how many and what rims
@Coryphillips1999
4 жыл бұрын
Send me a text at 870-648-0338 and I'll send you a picture of what I bought.
@fallenangel9217
4 жыл бұрын
@@Coryphillips1999 hey thank you for getting back to me I live in Canada and dont have international txt
@Coryphillips1999
4 жыл бұрын
Can you call me? Or send me a email at clphillips99@outlook.com
@fallenangel9217
4 жыл бұрын
@@Coryphillips1999 I sent you an email I'm SHADOW-2266@hotmail.com
@erickchairez4159
5 ай бұрын
What size rim in the front?
@erickchairez4159
5 ай бұрын
Is it 12x7.5? I found some on ebay that say "oem rear wheel rims 2009 suzuki kq" any idea if these will fit as front wheels for my 03 kq?, thanks.
@Coryphillips1999
5 ай бұрын
Mine were 12 inch and they have to be from a Suzuki Eiger
@JasonSturm78
3 жыл бұрын
How can you have 4 tires the same height and not mess the gearing up? Since they have different heights front to back stock, dont you have to keep that heighth ratio the same or change gear ratio in the front
@Coryphillips1999
3 жыл бұрын
It's such a slight difference that it doesn't matter, especially off-road.
@jamesspivey8469
9 күн бұрын
I watched the video. It sucked in the mud.
@BipolarKreations
3 жыл бұрын
Not the first. I did this back in late 90s. Another guy fully built a 5" lift. Lol
@BipolarKreations
3 жыл бұрын
Also we adjusted the 1 reason you struggle with the front wheels. Which is the reason they came with different size tires.
@hydrazombie
4 жыл бұрын
engine doesn't have enough balls to turn them big tires fast enough in deep mud
@Coryphillips1999
4 жыл бұрын
It does actually, ended up having to re-jet the carb.
@smittystratton6105
4 жыл бұрын
@@Coryphillips1999 let's see an updated video then. Lol
@ParkerGOR
3 жыл бұрын
@@Coryphillips1999 what jet did you end up using? I’m about to snorkel mine and have no clue what jet to use
@jessesmith5259
4 жыл бұрын
Negative Highlifter boys made a Huge one way back in the early 2000's
@logicskater1185
3 жыл бұрын
Find it plz
@jeffb8562
Жыл бұрын
If you have one, don’t sell it. One has never been built like it. And unless they start making them again, another one will never be built like it again. Just like the old VW Bug. They tried to bring it back.
@spencerbo1795
3 жыл бұрын
Sir do you have a surplus of rear ends for it because the go out in 2 months of riding FUCKING STOCK
@johnscribb6731
Жыл бұрын
I have 4,000 miles and 23 years riding on my 1999 and never had a rear end go out. Maybe someone tricked you into buying something neglected and damaged.
@louisianarebeltv4878
Жыл бұрын
I have beat the living shit outta mine and never had a rear end problem…
Пікірлер: 83