Thanks to Henson Shaving for sponsoring this video! You can use the code bpsspace to get 100 free blade refills at hensonshaving.com/bpsspace
@1943vermork
6 күн бұрын
I wish your rocket an unbreathable black sky one day 😂
@creesch
6 күн бұрын
I love the content you put out. Just one little thing that does bother me a little bit. Isn't onshape also sponsoring this video? I see it popping up in several channels, and they all have a custom referral URL linking to it. Yet none of them, including you, call it a sponsor. Which seems a bit odd and not really transparent to me. Not to mention that federal regulations require that sponsorships are disclosed.
@TexDrinkwater
6 күн бұрын
It's a really good product. I ordered one after seeing several plugs for it on Practical Engineering, and I've been really pleased with the results.
@rasmis
5 күн бұрын
I'd happily spend 10-50 USD on merch that supports my favourite creators, but even the Swedish and German creators have webshops that favour Americans, and place huge burdens on Europeans. Why is it easier to buy random stuff off of Wish, Aliexpress or Temu, than to support KZitem channels?
@Bear049
2 күн бұрын
Suggestion you might be able to correct this by a step coming up from the top of the curved section of the nozzle so that the finallic overlaps slightly near the area it is burned back. I could send you a drawing if you would like . The area of the amorphous carbon
@PracticalEngineeringChannel
6 күн бұрын
Man. There really is nothing like a good cross section.
@yashank_singh
6 күн бұрын
thumbnail looks like some hentnai cover. looked like thighs im sorry xD
@lessel1103
6 күн бұрын
@@yashank_singh i think you need to go outside more
@misokocka2752
6 күн бұрын
hi i didn't expect you on this channel
@misokocka2752
6 күн бұрын
love your videos
@thomasrogers8239
6 күн бұрын
@@lessel1103 the dude needs to go touch grass
@LafayetteSystems
6 күн бұрын
Im blown away by how well Mystery Goo is performing!
@Bandit-u3u
6 күн бұрын
Bro y'all should colab
@liljohn118th
6 күн бұрын
You should definitely mount the cross sections up as art in your house. That way all your guests can see the threads on the forward closure! 😂😂😂
@prothomasgaming
6 күн бұрын
This guy is the only youtuber i never skip sponsors time of the video... Love this channel!
@BPSspace
6 күн бұрын
🙏💙💙💙
@ilyaholt8607
6 күн бұрын
Jay Foreman also puts a lot of effort into his sponsorship bits, and also The Yogscast, though to a lesser extent.
@prothomasgaming
5 күн бұрын
@@ilyaholt8607 oh, i didnt know any of those 2 channels, though Jay Foreman seems interesting
@basvn
5 күн бұрын
@@ilyaholt8607 was about saying look at Jay. you are absolutely right
@Z0ctB0x
5 күн бұрын
It was actually interesting for once!@@BPSspace
@aaronatstate
6 күн бұрын
If you ever have graphite chunks on the ground, you’ve had a major problem, even if your superiors think you’re delusional. I learned this from Chernobyl.
@amyshaw893
6 күн бұрын
I mean it's not great, but it's not terrible
@kalebbruwer
6 күн бұрын
Especially if they're glowing
@constantins.2981
6 күн бұрын
My first thought was to use diesel glowplugs, for iginition,. For the following reasons: 1. Price: You can get chinese knock-off models for a few bucks and qualitiy brand ones for 20 bucks. 2. Weight: They are relativly light in comparison to your huge stainless bolt. Every gramm saved is one gram more Payload. 3. Pressure limit: A disel engine can reach compression pressures (combustion pressures are wa higher) similar to your recorded chamber pressure
@boi829
6 күн бұрын
this is a pretty cool idea but i think the problem would be that a glowplug doesnt "go off" the way a charge does, and you usually use a sudden burst of energy to ignite a rocket motor. I dont know for sure that this wouldn't work, but i would be concerned about how slow the ignition process would be because if the motor start burning unevenly, it could lead to more problems and the worst case is the motor blows up. I have seen a high-powered rocket explode shortly after ignition because of an improperly placed igniter in the motor
@mattkingston6157
6 күн бұрын
@@boi829you’re right and you’re wrong too. Your thinking is good though. The diesel glowplug wouldn’t ignite the motor, it would ignite the propellant mixture inside the igniter. The glowplug replaces the large bolt that is used to house the electronic igniter which ignites an ignition mixture which then ignites the main propellant. There would be no need for the massive bolt it would simplify construction and definitely be lighter. Plus it is already designed to work in this environment and glowplugs are very simple devices. Off the self components rule
@boi829
6 күн бұрын
@@mattkingston6157 oh that makes more sense i thought they meant the glowplug should directly ignite the motor, thanks for explaining
@mattkingston6157
6 күн бұрын
@@boi829yeah man good thinking though. I agree I don’t think a glow plug could ignite the motor on its own. I think you’d need to have an ignition mixture too
@SuperSpy00bob
6 күн бұрын
@@mattkingston6157 You could also "speed up" the glow plug by overvolting it. It's not like you need it work work for more than a like second.
@simonebonfanti3983
6 күн бұрын
That transition between real life cross section and cad model is so satisfying
@AstroCharlie
6 күн бұрын
Let's go! Super awesome cross sections and an absolutely FIRE t-shirt!
@patchvonbraun
6 күн бұрын
When I was making (smaller) graphite nozzles on the lathe, I ended up making a custom little tool out of flat HSS with the right divergent angle in it, and then just slowly drove it into the bore of the nozzle until it was perfect. Even iso-molded graphite is pretty easy to machine this way. I ALSO learned that the very-high-priced iso-molded graphites are not that good for nozzles. They're a bit like glass, and thermo-shock and crack really easily. I ended up backing-down a grade or two and that problem went away.
@chefpatat
6 күн бұрын
Chat can i eat graphite dust with my cornflakes?
@relwalretep
6 күн бұрын
You can eat anything if you're hungry enough.
@Gingerbread3232
6 күн бұрын
Of course
@chefpatat
6 күн бұрын
@@Gingerbread3232 alright thx, was asking for a friend
@shaughnreilly6928
6 күн бұрын
Lemme know how this turns out. I’m curious now
@relwalretep
6 күн бұрын
@@shaughnreilly6928graphite is just fancy carbon, we're carbon based life, what can possibly go wrong‽
@WinstonMakes
6 күн бұрын
There is so much interesting nuance in this dissection and it adds so much context I didn't know I needed. I specifically remember years ago watching a video about Space Shuttle SRB testing, how Orbital ATK/NG would immediately purge the booster with CO2 after a test fire. I didn't understand what kind of information they were trying to preserve in doing that, but knowing now about the heat soak and continued degradation of the materials involved after firing, I can appreciate it more. Thanks, Joe!
@WiSPMusic.
6 күн бұрын
What an awesome clip at the end. “Boom.”
@mrobinson9297
6 күн бұрын
hey perfect timing. i had a thought. for spincasting. you might want to look into the vices that glass blowers use. they make them to hold glass tubes and spin both ends at an equal rate, for hand made scientific glass blowing , and the mechanics isnt super complex. im pretty sure they can be 3d printed though i haven't tried to build one yet. ive also seen rollers made from the wheels from roller blades that you can use to support one end.
@mattkingston6157
6 күн бұрын
Yeah good idea. Another one is basically a super long ball mill. Some caster wheels on a piece of plywood with an electric motor mounted beneath with a belt going from the electric motor to the rocket case. You can make something like this for any size motor, up to hilariously large sizes
@agsystems8220
6 күн бұрын
Seems overkill. Glass blowers need that because they often want to join two things and spin them as they do so, so the work piece cannot transmit torque between the ends, but that isn't the case here. The case will always be solid enough to transmit the rotation, so an unpowered work holder at the other end is fine.
@loganmerryman202
6 күн бұрын
18:44 a wise man once said .. " Bigger da gob, better the job"
@jjchouinard2327
6 күн бұрын
I wish there was a double thumbs up for all the effort put into this channel.
@RavenRof
6 күн бұрын
I love the fact that you keep your mistakes in. The threads weren't great, and as a complete "normie" which never made a thread or a rocket (me), I appreciate watching the "fails" + learning moment the fail offers of a highly educated, expert, human being (you). This is what makes me a regular watcher.
@cf_spacetime
6 күн бұрын
OH! Two ideas just came together in my head right now. @HammerlyCeramics was demonstrating vibrating their molds during pours to reduce the bubbles in their slip casting pottery. The bubbles at 15:54 reminded me of it and using a vibration source like a hand sander to the outside during the pour may be worth a shot at reducing that.
@C-M-E
6 күн бұрын
My wife and children are notorious for looking over my shoulder when purveying 'boring' white papers and technical jargon, but I need to keep them on their toes. Enter a BPS Space viewing this evening. I await the inevitable 'what cha watchin' Daddy?' "Macaulay Culkin turned it around and is launching rockets."
@ryaninwa5375
6 күн бұрын
I really liked the breakdown of what's happening inside, and that when you use complex jargon, you stick to it and continue to ingrain the language into what you do.
@DodgeCrazed
6 күн бұрын
I deal with hydraulics quite a bit and you can get what is called an o-ring backup. It’s a relatively thin part made of the same material as the o-ring. It goes on the non pressure side of the o-ring and fills the void in the corners giving the o-ring support across the whole profile. This improves the durability of the o-ring by a good bit. It’s a worth look into.
@judet2992
6 күн бұрын
How is it mass wise? He hasn’t had o ring structural problems and except the case burn through with risky Batman, and the gasses have never really done anything to the second backup o ring
@benjaminnevins5211
6 күн бұрын
I love your power cross feed on the lathe.
@wojciechsosna9230
6 күн бұрын
Joe bepis as always comes out with an absolute banger of a video (Im barely 1 minute in)
@AlphaPhoenixChannel
5 күн бұрын
Such a cool breakdown! The soak heat thing had never even crossed my mind, but wow it did a number on the graphite interface! I have to say I also love the air can technique - the other day I needed a continuous 40 minute shot and I was using a leaf blower on my a6400. Duster cans sound SO much better 😂
@studiomodoki
6 күн бұрын
Maybe think about putting a small radius in the machined steps of the forward section. This sharp internal corners could lead to cracks under load.
@davidjuckem8850
2 күн бұрын
my thoughts as well. It is just good engineering practice to incorporate a radius in corners when possible.
@thermicdude9164
6 күн бұрын
The handmic segments have serious "Explosions and Fire" vibes😂
@jacksonsolomon8769
4 күн бұрын
My day job is testing rocket motors. To keep the pressure transducer from getting fried on every shot separate it from the combustion gasses by an inch or two of silicone grease. The pressure transfers through the grease but it helps save the diaphragm on the transducer from some of the abuse.
@Nishye501
6 күн бұрын
0:18 make sure you add an s so it’s secure lol (https)
@ilyaholt8607
6 күн бұрын
Sorry to ruin it, but it's HTPB (hydroxyl-terminated polybutadiene)
@Nishye501
6 күн бұрын
@@ilyaholt8607 I know lol
@GrahamHill-oz1bu
Күн бұрын
End closure and nozzle sections on a shelf with other trophies. Well Done!
@sethhope
6 күн бұрын
Since the spincast liner works via char layer, could you, in theory, spincast hotdog meat into a rocket motor and end up with nicely charbroiled hotdog after a successful burn? The meat would form a pretty dense char layer and could work in a similar capacity, albeit with a thicker liner.
@esjihn
6 күн бұрын
4:14 Delta P huh? When it's gotcha, it's gotcha B)
@nicholasfraley6353
6 күн бұрын
This is a crazy undertaking for a hobbyist. you may not be the first but you're the first I've seen. I wish you luck!
@centaur1a
6 күн бұрын
Thank you for this video. It is very much in-depth on how a solid motor works without the high tech mumble jumbo that most documentary’s do. It does show how the weak points of the solid motor on the Challenger happen too.
@SpaceflightSimulator_Official
6 күн бұрын
There is something amazing about seeing the hardware from this close up, cut in half and broken down to every detail.
@grumpygreg7505
5 күн бұрын
Joe, I'm so glad you post such excellent stuff. I will never be building a rocket motor but the learning I get is so enjoyable. Your bit for the sponsor was pretty good too.
@mattholmes00
3 күн бұрын
Each video is better and better, thanks for taking the time to make quality content
@frankh3230
6 күн бұрын
This is the nerdiest autopsy video I’ve seen. Awesome work!
@renegadethesandwing02050
5 күн бұрын
i can personally say Henson razors are great me and my dad have one and they're really nice to use
@theelectricwalrus
6 күн бұрын
For the 10th time: JOE! USE A TAP ALIGNMENT GUIDE!
@testpilotmafia862
6 күн бұрын
I was really grateful you made the time to meet with us rocket fans at Open Sauce 2024.
@clbwright
6 күн бұрын
Hell yeah. Another Joey B video.
@andrewadams4000
4 күн бұрын
Love henson, they are game changing i have very sensitive skin so being able to change and clean everything is awesome and they really do a good job on longer hair
@paulholmes672
6 күн бұрын
Joe, Exceptional cross sectioning and brilliant critical thinking throughout. Having burned a thousand plus motors, with a goodly part of them graphite solid and graphite insert nozzles (as well as the typical, commercial, full phenolic) your analysis is spot on. When showing the graphite to phenolic char, I was waiting for the 'other shoe to drop', and you nailed the analysis challenge (with my accompanying big grin), on graphite's tendency to go post burn crazy with heat transfer. During the burn, there would be little to no heat effect on the phenolic. That is the 'other' benefit of using a nozzle insert, by using the sleeve as a post burn insulator/anti heat prophylactic to the case/airframe. The first, of course is the geometrically increasing cost of high density graphite by diameter/mass. One other item was your O-ring analysis. I have some Canadian students building an O class hybrid motor, and they had a bit of an issue with their forward closure O rings with slightly incorrect assumptions. I will suggest to them this video to better illustrate my written analysis. And you are correct, your forward closure primary O-ring was more than likely ineffective due to the RTV filling the required pressure gap, but, Hey, that is why we use two rings, one for us and one as an offering to the rocket gods. KUDOS, Sir!
@Hannah-451
6 күн бұрын
This is one of my favorite and most in depth journeys I've had the pleasure of observing.
@artyombeilis9075
6 күн бұрын
Good injection of sponsor note on shaving. One of the few sponsor notes I actually didn't skip 🙂
@garry5280
5 күн бұрын
Definitely worth keeping these parts for your BPS Space history museum
@Ezis9
6 күн бұрын
I really appreciate the low-key vibe of this video over the extra that was the last video.
@DmitriyKhazansky
6 күн бұрын
Hope you go in depth on the electronics and telemetry architectures and design choice!
@RobertRangel-l8h
6 күн бұрын
Love, love, love the cross sectional breakdowns!
@peteabc1
3 күн бұрын
When I see that (glued in) graphite nozzle..I think various 3D printed jigs would improve the process a lot. For example one positive control (a contour) when you're turning the nozzle, one for keeping it aligned when gluing it in and a spatula for spreading that rtv silicone.
@Zaiyetz
6 күн бұрын
Could part of the reason the char layer is thicker under the graphite be simply because the char layer at the exit has been stripped away by the gasses exiting the nozzle?
@Ionee-q4f
6 күн бұрын
1:08 leaked spaceshot motor size
@TheBloodypete
4 күн бұрын
On the top end metal piece, those parts you're worried about the distance on, try adding a fillet to that outer edge. I do that on my 6000m rated subsea enclosures and it massively helps with stress build up on thaose thin sections!
@TLBSBD
6 күн бұрын
Let go BPS!!! I am stoked to see you scale this up.
@SpaceMace31
6 күн бұрын
SMOOTH transition from cut-away to CAD! Nice one bruv!
@Zardwark
5 күн бұрын
The best video this year by far. There is a metric[1] siht ton of data there. It's going to work, it will reach 100km, for sure. [1] Also available in imperial measurements.
@NiemanScott
6 күн бұрын
That first transition from real to CAD is 🎉
@ast_rsk
5 күн бұрын
This was such a great breakdown of what happened in the last test. Thank you!
@GNARGNARHEAD
5 күн бұрын
"it's a misconception that all pressure inside a thrust chamber or rocket motor is the same, um in fact you can sometimes get a Delta P or change in pressure of several hundred psi", that, is worth a thumbs up right there alone
@keithjurena9319
6 күн бұрын
Liner looks perfect. RTV between linen phenolic and graphite is probably less than optimal but probably generated gas which protected the downstream linen phenolic from erosion by making an opaque boundary layer.
@JonahGreve-bn6jc
6 күн бұрын
I chose to watch this over the first presidential debate between Trump and Harris
@savagesarethebest7251
6 күн бұрын
Understandable, I can't understand how a such hateful clown ever became a president one time but once again is considered for presidency in your country. Your country is very much more divided and hateful than ever and I pray for you.
@nickgoodhart2769
19 сағат бұрын
Over every debate
@frafracho473
Күн бұрын
Great video ! About the miniature that you changed, I preferred the one with the close up on the nozzle, hope it helps !
@TheLonelyStreetLight
3 күн бұрын
I’m excited to see the space shot
@nickgoodhart2769
19 сағат бұрын
Your editing skills are amazing
@marcelpost4052
6 күн бұрын
Wow, you keep on setting the bar higher and higher. You are truly inspiring!
@Poult100
6 күн бұрын
Fantastic detail, thanks! But oh, man; those threads! 😅 Thanks for your honesty!
@neilweinstock4194
4 күн бұрын
Making my own motors is not something I have even the slightest interest in, but this was nonetheless really fascinating and informative. Just superb work all around.
@MattH-wg7ou
Күн бұрын
I feel like this video is a walking talking ITAR violation lol. Great stuff!
@amogusenjoyer
6 күн бұрын
This really goes to show how impressive spacex's reusable rockets are. Imagine surviving much higher pressures multiple times with minimal maintenance.
@drakkon_sol
6 күн бұрын
This was a great video. Very informative. Also, yes; these are pieces of art. They tell the story of a journey.
@ChaitanyaSrikar
6 күн бұрын
This is incredibly impressive but it also put into perspective the achievements of SpaceX in landing a booster back! And its reusability given there is so much perishable material used!
@flyingraccoons2283
6 күн бұрын
we really need more random joe building stuff streams
@invalid8774
5 күн бұрын
binging with babish has a new challenger when it comes to best cross sections
@badraa7838
6 күн бұрын
So nobody will talk about how clever that transition to the sponsor segment was?
@nedredguy
5 күн бұрын
Can't wait for the next motor! I could watch them fire all day
@michaeljames1857
6 күн бұрын
Love your analysis and honesty (with your threads)
@janstransky442
4 күн бұрын
Payload was data. Awesome work, awesome shots.
@mojaverockets
5 күн бұрын
Nice video as always Joe. For our head end igniter bulkhead bolt we simply used a hardware store (Lowes-Home Depot) 1/2" bolt drilled through for the wire and pyro charge...I think they were like 75 cents with red RTV sealing the threads if you need to save some money.
@BPSspace
5 күн бұрын
Thanks Rick! See ya out at FAR again soon :)
@JanDoggen
23 сағат бұрын
When I put this video in my 'Watch later' list, it's title was something like 'I cut a rocket motor in half' ;-)
@Werdna12345
6 күн бұрын
That sponsor spot was genius. 👍 I’m not interrupting a video. I’m helping you pass the time that i definitely didn’t dilate 😉
@fledglingrockets
6 күн бұрын
Double Joey Pepperoni Bizzlington uploads in 30 days?
@bloodaid
5 күн бұрын
Me at 2AM: Well ofcourse I need to absorb thi highly scientific information
@samheasmanwhite
6 күн бұрын
The o-ring damage seems unlikely to be from the RTV unless you didn't give it enough time to cure and off-gas, they don't contain anything that would degrade cured silicone unless it is a rather unusual composition but I think the acetic acid it releases could swell it a little temporarily which would make it weaker. The final damage appears to be classic o-ring extrusion, just gap too big for the pressure and o-ring properties. Here's some tips for that: 1. Tighten up the tolerances. 2. Use a harder o-ring, butyl should be fine but maybe FKM if you are feeling opulent. 3. Use a backing ring/wedge that presses tight against the outer diameter, PTFE would do it but you could probably get away with any high-melt plastic.
@aterxter3437
5 күн бұрын
I remember my first model rockets, after having fun with a class types. I went to h class with a cariacou motor, tiny but 142 Ns of impulse, and damn this model didn't have have a thermal liner, the steel casing just coped with the heat during the .5s burn. They got crazily hot and we held them in place with wood rings to avoid getting platic melting. I was really suprised to see than when the CNES decided to switch to the Cesaroni pro-24 g150, they stayed cool and could be held up with pla parts. I didn't understand before seeing your videos about thermal liners. And yes, I wasn't free about motor choices : I live in France and you do everything but the motor it's forbidden, the CNES handles it, and you can only select between a few models. Next project going above M1 with a 24mm 142 Ns motor and have mechanical nosecone separation (mandatory here). A challenge? YES but it's a (student) engineer's job
@etiennekotzee5556
6 күн бұрын
Yoo a video that is not 5 years apart
@dylanhalifaux
6 күн бұрын
Henson Razors really are amazing!
@JosiahKeller
6 күн бұрын
They didn’t work for me. Big disappoint.
@SrabbelOnYouTube
6 күн бұрын
sneaky little "shave and a haircut - two bits" at 3:11
@azazahmed3708
6 күн бұрын
more videos like this please damn please a whole playlist or series sooo in dept
@extremetech6836
6 күн бұрын
I like it when he dives into details Super nerdy i like it ❤
@bobthecomputerguy
6 күн бұрын
I love seeing the engineering of rocket science.
@yahwea
6 күн бұрын
Very interesting. You have worked hard at this goal.
@KionLionGuardOfficial
5 күн бұрын
Joe is back with another slammer of a video! Great work as always :)
@cabe_bedlam
6 күн бұрын
Less liner and more propellant you say? *double checks notifications are on*
@zibingotaeam3716
6 күн бұрын
"Solid Rocketry is getting kinda old" holy smokes, he's gonna go liquid?! "so we'll be doing mach 3 control stuff next" oh okay alright then
@thomasbooska1448
6 күн бұрын
do you ever just nozz?
@BPSspace
6 күн бұрын
Constantly, yeah
@AnotherGlenn
Күн бұрын
I think it would be cool to cut a whole rocket in two and embed it in one of those epoxy tables so you could eat, drink and marvel at the beautiful engineering.
@amateurshooter6054
4 күн бұрын
Thanks Joe
@Ziraya0
6 күн бұрын
You definitely should put them up as art. Maybe do something to seal them, could be cool to make a clear plastic filler piece that replaces the part you cut off, but the optical properties might confound that
@Cairo-x9n
6 күн бұрын
Near the 20 minute mark i was getting lumineer flashbacks with the amount of stuff joe is planning to test
Пікірлер: 433