My suggestion would be to call HD customer service and see if they are willing to hear your issue and / or reach out to the factory engineering dept. HD needs to put out a TSB and have the dealers make the needed adjustment or repair to prevent this from happening. Someone will be seriously injured or possibly killed if this is not addressed. Excellent reporting on your part!! Glad you were not injured or your bike damaged.
@SmittyAZ
Жыл бұрын
They’ll probably watch this and reach out since he’s got a following.
@RidingandWrenching
Жыл бұрын
Thanks. I hope that a future update disables the engine shut off logic. I truly don't like that idea under any circumstance. I cannot think of a single instance where that is a good idea
@anthonygreco1130
Жыл бұрын
@@RidingandWrenching Agree. If enough people complain to the Motor Company then hopefully a solution will be initiated.
@worldofzap
Жыл бұрын
Also agree and this should be an option to disable at least at the dealership. I applaud Harley for finally putting this feature in their tour bikes but not at the risk of getting hurt if it fails. I would rather just have the dummy light to say kickstand is down. I know on my Ultra I had them turn off the feature that turns off my auxiliary lights when I switch on my high beams, they just did this in software using their digital tech computer. Wondering if they can do the same with the kickstand down feature just have the warning but not to shut off the bike?
@SmittyAZ
Жыл бұрын
@@worldofzap I hope IF other guys have the issue, they come forward. It's not EZ for some to say they dumped a bike.
@toddboynes4027
Жыл бұрын
I'm glad you didn't injure yourself or damage the bike. Maybe give Robert Simmons a call and ask him to test that theory out the lean angle theory.
@dustynalra
Жыл бұрын
heck i'd super glued that washer to the magnet asap!!
@bolaeljefe2680
Жыл бұрын
Lol
@Mike-sp4ey
Жыл бұрын
Glad to hear you were not injured. By the way I enjoy all of your videos.
@RidingandWrenching
Жыл бұрын
Thank you!
@winslodouglasii9521
Жыл бұрын
Welcome to all the electrical issues you will have now that Harley has introduced more electronics into their new platform. Indian has had these same weird electronic failures for years and the response from the dealer is a constant CRICKETS! Good Luck....
@tax905972
Жыл бұрын
No crickets. Just read the manual.
@CYCLEFANATIX
Жыл бұрын
Sorry to hear that Q. Glad your ok 👍
@RoadRushNation
Жыл бұрын
I had a similar issue recently but not with the kickstand. It just turned off while I was going 70 MPH. This is why having all the computer interface is not progress. One thing I learned you can reset the electronics by turning the bike on let it go through the start up and then turn off. Do this again 5 to 6 times and it resets the electronics. Also make sure that when you take your bike in for service that they make sure to download any and all updates for the bike software. I had 2 missing updates and they would have prevented my issue. Ride safe my friend
@jellydick5839
Жыл бұрын
Sometimes your will have to pull the main fuse to reset the electronics.
@nailsanders9572
Жыл бұрын
Glad you are safe brother
@heystarfish100
Жыл бұрын
Being a brand new bike and having an intermittent electrical problem can be very frustrating especially when the technician cannot recreate the problem. If the problem reoccurs I would suggest that the electrical circuit from the module to the sensor be checked and tested for a loose connection anywhere in the circuit, a pulled out terminal that did not get locked into the connector or a terminal end incorrectly installed to the conductor. The chances of foreign debris would be very high and in my opinion this fault will reappear because it has yet to be detected and fully investigated
@christiaanschoenmakers1290
Жыл бұрын
Your dropguards were a very good investment. You saved a lot of money by not dropping the bike. EU bikes have this kick side switch since 2014. No issues. And the US police bikes have this switch too. Nice video, thanks for sharing.
@ThePot63
Жыл бұрын
This is good to know,i haven’t had this issue as of yet with my bike,but now thanks to u i know what to do and not to do!!💪🏼💪🏼
@ashleyroffe
Жыл бұрын
You know the answer: buy a metric bike that doesn’t have HD problems, and costs a lot less. I use the kickstand to turn my bike off when I stop on my Suzuki. Never had a problem with Japanese or Italian kickstand switches.
@JoeGoeMotorcycleAdventures
Жыл бұрын
I had that feature on the Pan America I owned for 2 weeks 😂 Absolutely hated it. After your explanation, that is really dangerous. Glad to see you came up with some type of work around.
@HarleyinGermany
Жыл бұрын
Damn brother, thats a beautiful bike, glad your not injured and its not damaged.
@stevegrace7898
Жыл бұрын
Only appreciate you making this video some good information that everybody needs to know and be aware of. Thanks for the great content
@mojomanmurph1925
Жыл бұрын
Very experienced riders told me to put saddle bag guards on my SGS because it costs a lot to repair/repaint the bags and it helps to lift the bike up. They said it can happen to anyone. They were correct.
@HOLYSHIFT
Жыл бұрын
Totally agree with you! Dangerous feature ? Sound like an easy fix with software.
@lancestrawser2233
Жыл бұрын
I’m glad your bike and more importantly you are all okay!
@RidingandWrenching
Жыл бұрын
absolutely! I don't worry about dropping my bike....it happens. Nothing to be afraid of and nothing to be ashamed of
@edjyjohnson
Жыл бұрын
Glad you're OK!
@johnw2693
Жыл бұрын
Thanks! Good info. Sounds like a good thing just to permanently disable with a washer glued to the switch
@andrewschultz2504
Жыл бұрын
I’m glad you are alright take care sir
@scottschaeffer8920
Жыл бұрын
Good point! Period! That motor is your life.
@robertstubblefield0032
Жыл бұрын
Glad all is well shipmate!
@FinesseTheChallenger
Жыл бұрын
I think instead of interrupting the operation at the START of the kickstand motion it would be better at the end (kickstand down position) of the motion…and a button rather than a magnet. But hey I’m no engineer lol. Good video, glad you weren’t injured.
@RidingandWrenching
Жыл бұрын
Does the Indian have a feature like this? Does it shut the bike off if you put the kickstand down?
@joshuanmccune_24
Жыл бұрын
@@RidingandWrenching Yes.
@haroldwiser2641
Жыл бұрын
Good video and I agree with your opinion; do NOT turn my engine off! I would tape that washer to the switch. New sub here too 😀
@allynpinnello3012
Жыл бұрын
Might have given the world an idea on a kickstand delete option.....I for one would definitely buy something like that!
@roadglide1142
Жыл бұрын
Take it in and see if it threw any codes ? Tell them exactly what happened it could be a faulty sensor ? . This is why I absolutely refuse to be anyone’s first year model Testing Guinea pig for any manufacturer. Glad you didn’t get hurt !
@LifelongMusicJunkie
Жыл бұрын
I think your washer hack will be the new in-thing for 2023 CVO owners! Cutting the power sounds like an accident to happen and a future recall. I enjoy your videos. Cheers
@adolfomendoza248
11 ай бұрын
Yes, you can enable/disable that function over program with the scanner connected to the bike
@LawrenceBroussard
Жыл бұрын
You're very correct that is dangerous! To think a little washer interferes with the system.
@crypto_que
Жыл бұрын
On my old Suzuki I had to use bailing wire to put a nut on my kickstand to ensure the kickstand made contact with the safety switch. If not hitting a bump would make the stand lose contact and the bike would shut off. Thanks for sharing your experience with the community
@2upjourneyjunkies
Жыл бұрын
Wow! 😮 Good info & glad you’re okay & made it home safely! Hope you had fun with the fam!
@zion1126
Жыл бұрын
Thankfully you and the bike came out great. It seems to me that you created your own solution to the problem, just need to attach the washer to the bike. Good informative video. Grace and peace!
@breezetelemaster1368
Жыл бұрын
Glad your okay! And didn’t damage anything, Great research and display, thank you for the updates, God Bless Be Safe!
@Smitty_b_Ridin
Жыл бұрын
Sounds like you were in a good spot for a so called u-turn fail that really wasn’t. Somebody else might not be. Good video
@storskegg
Жыл бұрын
I'm really glad you you brought this up. There are a ton of traffic circles in my area, they're mostly 2-lane, and the drivers DO NOT know how to go through them. Also, a lot of big trucks. If I buy this bike, and the engine cuts on a traffic circle, that'll be it. I'll roll up under the truck behind me or to my side, and a ghost rider I shall be. I really hope that Harley fixes this.
@RidingandWrenching
Жыл бұрын
I think they will get a fix. The key thing to know....if you get that warning message, don't lean the bike....and move to the side of the road as quickly as possible.
@markcraig3702
Жыл бұрын
Great video Q , Glad to hear that You and the Bike are Ok. Keep Riding and Wrenching.
@TobyNorthEN
Жыл бұрын
New subscriber!!! Great video! Informative, and you provided some brilliant points! Ride safe!
@carlosmac904
Жыл бұрын
That’s terrible bro. Glad you didn’t get injured. A simple pressure switch tied to the ignition would have been fine in my opinion. That way the ignition is only interrupted when the kickstand is down and something would have to apply pressure really strong to inadvertently hit it while moving which would probably never happen. That feature is for rookies anyway. Put computer controlled suspension on the bike instead of a stupid kickstand down switch.
@jasonkimble8926
Жыл бұрын
Need to make a little cap, and leave it over it.
@six8415
Жыл бұрын
Glad you’re ok. Good Ol Harley Gremlins. Personally I never by ANYTHING first “new” production model. I’m so glad you’re ok brother 🙏🏾
@mtericktucson
Жыл бұрын
If they have to do this, interlocking the starter relay is the way to go(not ignition), along with a warning light or display feature. I'm with you, less chance of being stranded or stall out in slow speed wins confidence from riders. Glad you are ok and good going on the guards.
@RidingandWrenching
Жыл бұрын
Drop guards worked like a charm! I hope that Harley (and any other mfg) changes the logic....never turn the motor off when the bike is moving
@newmoney8128
Жыл бұрын
@@RidingandWrenchingwhere did you get the drop guard from I already have the bars for my engine and saddle bags
@RidingandWrenching
Жыл бұрын
@@newmoney8128 motorcycledropguards.com/
@1022SLB
Жыл бұрын
We don’t know each other, but I’m glad you were not hurt in that intermittent switch caused incident Brother!
@RidingandWrenching
Жыл бұрын
This issue is easily resolved by changing the logic of the kick stand interrupt. Rule #1....never shut off the motor when the bike is moving. Arguably, you should never shut off the motor unless the wheels aren't on the ground. Otherwise, leave the decision to the rider
@InfamousCreep
Жыл бұрын
I’ve ridden with my kickstand down before, and the road kicks it back up while riding.
@MacRides1
Жыл бұрын
I totally agree - thats something i would have to figure out how to disable or remove the sensor. I would say that is an over-engineered feature and I would have to remove it.
@swango1
Жыл бұрын
Thanks for sharing! I have a 2023 Indian Chieftain with the same side stand feature, so this is good info to know. Ride safe, friend.
@RidingandWrenching
Жыл бұрын
The Chieftain will be on my short list for my next bike....along with the Street Glide and that thing from BMW that looks like a Street Glide
@GeoRides114
Жыл бұрын
That’s dangerous and I agree with you. Hopefully it’s a software fix or a quick part swap.
@lancmac
Жыл бұрын
Thank you for the IMPORTANT information...... You might try starting the bike with the kick stand up and lean it over 25-30 degrees and see if the kickstand is held firmly in place. The return spring might not fully secure the KS arm and it might bounce against the frame and break the magnetic contact.. If so a stronger return spring might be the answer.. Or maybe a better alignment of the sensor to the KS leg..... Moral of the story... keep a washer in your pocket for backup.
@ShepherdGGross
Жыл бұрын
I agree. Don't automatically turn my engine off. Respect to the Navy. I was Air Force. Is that a 66 Stang? Side looks like my 66. Love that color!
@PacoMartinez66
Жыл бұрын
Maybe your kickstand is vibrating off the magnet when you hit a bump on the road? Maybe moving the sensor further up if possible, will probably fix the problem.
@bigrobpierce3804
Жыл бұрын
Hopefully HD will figure out what the problem is Glad you're loving your new bike. Stay safe out there✌🏾
@RidingandWrenching
Жыл бұрын
The new bike is awesome! I have some more content coming out this week featuring the new bike
@arrowpointstudios
Жыл бұрын
Great instructional video, Harley should contact you being that you are a content creator, engineer and an actual cvo owner..! I look forward to your future content.
@brettcreech3490
Жыл бұрын
Glad you are ok.
@markman7
Жыл бұрын
I wonder if hitting a bump could have allowed the stand to move some on its own or maybe when you put the stand up it may not have went all the way up. Anyway, glad you didn't get hurt. This system is new for Harley and unfortunately their validation process is usually done by their end customers, fixed later on future model years, and offered as an upgrade at a cost for those who were the early adopters and had issues. Harley isn't afraid to Mickey Mouse new to them features. Reverse on the trikes is a clear example of that.
@monsride
Жыл бұрын
Very interesting, well done in finding out about the magnet
@thomasjohnson6827
Жыл бұрын
You can disable the sensor by cutting the wire to the sensor and tie the wires together on the sensor side. The computer will always think the stand is down. Good luck. I ride.
@jessieholt9238
Жыл бұрын
I'm glad u figured it out like u said this could be very unsafe great update on the kickstand switch
@ElectraWillem
Жыл бұрын
About time to check or replace that faulty sensor, because that error will come back in future, and then someone gets hurt.
@outdoorstudios2022
Жыл бұрын
Thanks for sharing! BIG shout out to Tim from @RidgeLife for bringing me here!
@briandickter2724
Жыл бұрын
The kickstand switch seems like a "safety" requirement in some international markets. But, I like those motorcycledropgaurds that you recommend. Now you don't even need to use your kickstand at all. Just park, jump off the bike, and lay it over on the motorcycledropgaurds. No kickstand required!
@sokodad
Жыл бұрын
Liking my old Road Glide more and more
@michaelcoulthard7377
11 күн бұрын
I agree my last CVO wouldn’t start if the steering head was locked but nothing with the side stand. This one is the exact opposite and i have started and picked up the bike to find the steering head locked. I think it is a serious risk as it is currently set up; could cause serious injury/death and a suit against the moco. I have taken off (infrequently) with the side stand down in the past without issues shutting off while under power or taking off with the steering head locked will have a seriously bad outcome.
@Bikerbug2020
Жыл бұрын
The bike is looking good with the TourPack on it… Have been scouting around for the same bike and dealers are really proud of it, with an MSRP of $42,999 plus freight, it is super proud to ask for between $52,999 and $54,999 even was told that someone was asking $60K for the Platinum Paint bike. Can you imagine what they want for the Whiskey Neat version?
@leestevens4536
Жыл бұрын
2- weeks later- I would disconnect that switch, similar to the seat switch on a rider mower. 😊
@pd6569
Жыл бұрын
You bike turned off!!!!! Jeez, I wonder what in the world caused that. Love the drop guards all around. Glad you and your ride are good.
@Clooney76
Жыл бұрын
Notorious issue on KLR650 that has lead to people being stranded in remote areas as the failed switch won’t allow the bike to start.
@addy6167
Жыл бұрын
Thanks for the info. Something to keep an eye out for
@JUNJUN-lw2vr
Жыл бұрын
I can see that being a recall from harley. That's a Safety issue
@terry4343
Жыл бұрын
Glad you & the bike are both ok. Sometimes in the effort to give you safety features that you really don’t need (and raise the price) the engineers find a way to make it less safe.
@RidingandWrenching
Жыл бұрын
Exactly. I can't think of a scenario where killing the motor to a moving motorcycle is a good idea....I can think of several reasons why it is a bad idea
@lowglide
Жыл бұрын
Wow that’s some great research. Seems like a bad design decision to put the sensor in a location where debris can easily get in and block it.
@LexGrossmansDog
Жыл бұрын
Take the sensor wire and ties the ends together to fake it being up all the time. Until they make a dummy plug for it.
@RRatedCustoms
Жыл бұрын
Yikes! Cool about bypassing the switch but with all the road debris and fine metal dust on the road then a magnetic switch down that low does not seem like a good idea. Harley had switches on the kickstand for some models before but I do not think they were based on magnets. Just a thought.
@stonewallwyoming8031
Жыл бұрын
Great video and that mustang is pretty slick.
@blackwolfveteranlaw854
Жыл бұрын
Agreed! 100% thanks for sharing
@Rocky-or4rz
Жыл бұрын
Glad to hear you were not hurt. That feature really sucks actually. My current Harley does not have that feature. Is this something they are only putting on CVO?
@homerscurry3460
Жыл бұрын
I experienced that when I was 15 years old... It never happened again due to my awareness of the possibility of a bike shutting down in a slow turn. That was in 1967. I am now 72 years old. Even if all that you mentioned is corrected, the possibility still remains of a shutoff during a slow turn...
@KrakensGarageandAdventures
Жыл бұрын
Wow! Have your bike towed to your dealer asap. I don't think it's safe to ride, and we're glad you were not injured.
@curtisck813
Жыл бұрын
Damn good video...and this is y...when something new..like this comes out...u will have issues..and unfortunately, when people like u get em..work out the kinks...the newer models will probably be better, thank God u didn't get hurt or damage that brand new bike
@RidingandWrenching
Жыл бұрын
I'm an early adopter. I don't mind finding the issues. I actually enjoy testing things out and finding things no one is looking for
@dwally32
Жыл бұрын
The big four Japanese bikes do this exact thing. For years. 120 years to figure it out and they have no clue. My wife's Honda rebel 1100 does this same thing only when it's in gear without the clutch pulled in.
@geedubb-q1u
Жыл бұрын
I have an OBD2 scanner for my truck and I think they have them for motorcycles too. There should be a spot on the bike where you’d plug in the scanner. They’re not very expensive and could be worth the investment.
@FXFBS23
Жыл бұрын
Great points about a potentially dangerous future issue with the sensor activating and shutting the engine shut off. Thanks for sharing
@gunshipgray4295
Жыл бұрын
I have the motorcycle drop guards, they’re a great product ! Jay ( the owner ) is great !
@gregmannos
Жыл бұрын
Gotta say not a fan of this. I've had bikes with no side stand warning and felt like I was gonna pole vault the bike. However, that's my stupidity and shutting the engine off is Harley's stupidity. I'm ok with a warning light... but not killing the engine... glad you had those guards ! And more glad your ok
@randyboomsma3812
Жыл бұрын
Hello from your old neighbor, crazy I stumbled across your channel looking at Harley videos
@randyboomsma3812
Жыл бұрын
I recognized your Mustang
@RidingandWrenching
Жыл бұрын
Hey there Randy!! Great to hear from you. I hope your family is doing well!
@randyboomsma3812
Жыл бұрын
Everyone is doing great, hope your family is doing good as well. We sold our house in March and moved to Arizona, keep the videos coming I really enjoy them.
@rsanchez5676
Жыл бұрын
Kickstand switches and clutch switches have always been Eliminated. I think it should be an option to use or not use the kickstand feature!
@Ankor413
Жыл бұрын
Thanks for sharing this info, very helpful. Keep the videos coming!
@gunshipgray4295
Жыл бұрын
You just made up my mind about purchasing a new CVO…..I think I’ll pass….and keep my “old” 2018 CVO…..
@RidingandWrenching
Жыл бұрын
I wouldn't let this issue be the deciding factor. There is so much to like about this bike
@CaptainSnoobit
Жыл бұрын
Very interesting ! Thanks for sharing this (scary) experience and glad nothing too bad happened to you ! I hope HD can hear this kind of experience and update/upgrade the bike accordingly... Let us know if you get any update from them after this video. Keep it up 👍 (From a french viewer in France)
@RidingandWrenching
Жыл бұрын
I hope that Harley considers changing the logic of the kickstand logic. I don't like the idea of stopping the motor while the bike is moving
@robertturriff9836
Жыл бұрын
Just an FYI, that seems to me it is a normally open or normally closed switch, if you need to you could jump the wires going to the switch to bypass the switch what we call fooling the system.
@RidingandWrenching
Жыл бұрын
I thought about that. So far the washer is doing the trick, but I am going to do some more testing to see if there is another alternative
@lancmac
Жыл бұрын
For back up.... get a small magnet and stick it to the frame near the switch... That will remove the operation of the kickstand from the computer... Not advice to anyone... just shade tree humor
@bradwilliams4921
Жыл бұрын
Glad you’re ok. Makes me appreciate my “primitive” 2002 Fatboy a little more.
@Dave-zy6de
Жыл бұрын
That's a major issue for Harley Davidson. That will kill someone.
@billflixtone6684
Жыл бұрын
The kick stand switch is permit To start, it does not stop the bike
@antruze
Жыл бұрын
Important info. Thx for putting it out there. Needs to be addressed IMO
@bobbullen7112
Жыл бұрын
Just found your channel. I quickly subscribed after viewing great site. Hope to see many other videos. I see a Navy flag in the background we’re you in the navy?
@Jim_Berry
Жыл бұрын
You’re right! A kick stand sensor should not be on a Harley! It’s probably a Hall Effect switch/sensor. Not much can go wrong with it and the most likely issue is a bad connection or terminal fit problem. I also agree that once the engine is running, don’t shut it off.
@jellydick5839
Жыл бұрын
I think HD should install a vibrator in the seat. If something is not right just vibrate the seat.
@GlidingOnTwos
Жыл бұрын
That definitely sucks and glad it happened under "safe" conditions. But it should be checked out further. Maybe having Harley install a new magnetic sensor for it.
@SmittyAZ
Жыл бұрын
Thanks for the PSA. I’m not sure what I would have done. I’ve been street riding for 43 years and about 30 bikes. I think the only bikes that I’ve had kick stand issues was my 99 Ducati that did not have the safety and it would start in gear with the stand down. I found out by accident with no issue. BTW - my first HD is a 23 fat bob and it’s the first time that I heard of a Jiffy stand. 😊
@RidingandWrenching
Жыл бұрын
My next non-HD bike will be a Triumph Rocket....I just like the way that bike looks!
@SmittyAZ
Жыл бұрын
@@RidingandWrenching I also bought my first Triumph this year: A new '22 white leftover Speed Triple RR. I could not decide between it and a new leftover '22 Aprilia Tuono V4 100 Factory in black. So, I bought both. Along with the fat bob, I was NOT planning on spending $70K in bikes this, or any year. (15K on the HD was financed) I'm now at 12 in the fleet. I mention this not to brag, but more as a confession since the g/f has no idea how much I spent.
@michaelconran5252
Жыл бұрын
Luckily our Softails don't have that. I have owned a 2009 Honda 230L that had that switch, irritating. Have 6 bikes now, none have it. If I get a bike with it, will disable it.
Пікірлер: 344