Thanks for the lessons! I have a 2018 GT 5.0 6 speed and love it!
@NVSRides
4 жыл бұрын
Great video. 👍
@GearHead704
4 жыл бұрын
Sorry about the crank man but better safe than sorry for sure. I've got to do something about the engine in my FoxBody as well
@luisvaldez2941
4 жыл бұрын
Hope you get it all back together soon. I’m the guy that was chatting with you on Facebook about the engine tick the other day. Another great video. Be safe out there.
@MybackHurtz1
4 жыл бұрын
Massive torque . Everything becomes a fuse.
@DARYLEWENGERD
4 жыл бұрын
What I suspect caused it is it was hydro-locked on a startup as coolant very likely filled the cylinder and would have put xtreme tension on the crank. Stock rods would very likely have bent but these Ibeams held up and I think that's what cracked it as it's where that rod connects to that cracked
@cheesegratercheesehead6133
4 жыл бұрын
sounds like that wld b the likely explanation. glad u found it b4 u had to rebuild again, soon
@fordtechlife
4 жыл бұрын
Got you from kens channel Your The Champ 🔴🇺🇸🔧👍
@aaronrogers7178
4 жыл бұрын
I hope it goes well for you with your new block 😊😁
@coyoteslugger3936
4 жыл бұрын
Budget short block on a Gen 1, would are your thoughts forged pistons, new Gen 3 connecting rods and ARP studs.
@dbrownent
4 жыл бұрын
My crank did the exact same thing.
@jmcg7906
4 жыл бұрын
A guy at the machine shop showed me how to tell if the crank is bad by standing it up and tapping on one of the counter weights with a bolt or something metal. If the crank is good it will ring, if it’s bad it will just have a thud sound. I’m curious as to how yours will sound. Also, what rotating assembly are you using?
@DARYLEWENGERD
4 жыл бұрын
I have heard this as well and will be trying that. Manley turbo tuff I beam rods and CP Pistons
@mikeregner4719
4 жыл бұрын
What stall do you have on your torque converter? Single or triple?
@sethster70
4 жыл бұрын
I thought that engine was stock bottom end?
@DARYLEWENGERD
4 жыл бұрын
Was at one time. Not this season though
@SCStang
4 жыл бұрын
Hey Daryl, how can I get in touch with you about tuning my car? Thanks!
@DARYLEWENGERD
4 жыл бұрын
Add me on Facebook. Daryle Wengerd
@Jamie-ww3yz
4 жыл бұрын
I have a question I have gen2 with stage two whipple I put a JLT catch can on but I think boost is back tracking through catch can into the crankcase. Is that possible? Passenger side by the way
@DARYLEWENGERD
4 жыл бұрын
Catch can should be connected on vacuum side so it should not be seeing any boost
Пікірлер: 22