My soldering was equally crappy until I started using Flux. I highly recommend it. Dip either end of the connection in flux and then solder. It evaporates, drawing the solder in and creating a really neat and solid connection.
@vaunkillion262
3 жыл бұрын
Coming from infrastructure electronics manufacturing I can say that when in doubt add more flux, flux is the king of soldering greatness.
@unitunitglue5143
3 жыл бұрын
Thank you all including the tutorial. Very helpful.
@DragonLawyer
3 жыл бұрын
I watched like a dozen KZitem tutorials on how to solder and while they would use flux they never really explained what it did or how important it was. Two best tips I can give when learning to solder: apply flux generously and clean your soldering tip often
@RussellTeapot
2 жыл бұрын
Flux is love, Flux is life
@yannixk.3294
2 жыл бұрын
@@vaunkillion262 that is true when i'm doing my work (learning to be electronics technician )and when i'm having trouble replacing IC`s or such i always just get told to use more flux haha
@Cheetahgirl_Studios
3 жыл бұрын
Can I just say, I absolutely love your tutorials. Most other tutorials I’ve seen are overly formal and lack a sense of connectivity. But your sense of humour and personality make your videos a lot more enjoyable and easy to approach. Not to mention that you create tutorials for people of all skill levels. I’ve been looking to get into making costumes for a while now, and this channel has helped me a lot with where I should start and get me started. Cheers!
@CHEFPKR
3 жыл бұрын
So happy for this video. Currently working on my Cyberpunk cosplay and want lots of LEDS
@bbear3886
3 жыл бұрын
who are u cosplaying? is there somewhere you share your Cosplays?
@MarianneDAbis
3 жыл бұрын
:> i do be watching this video thinking if i should buy it to make cyber punk glasses
@aidanmcmurtrie1424
3 жыл бұрын
Omg it's ChefPK in the wild
@iisnuffles
Жыл бұрын
same! redoing my rebecca jacket 👍
@BboyKeny
Жыл бұрын
Awesome! I'm curious how it's going
@revenantcosplay
3 жыл бұрын
I always remember which side of the led is positive with + is more and - is less so the positive leg is longer. I also recommend getting a silicone mat, possibly with trays, for soldering. It protects your work surface in case any rogue solder gets anywhere and you can set your parts on it and keep them in one place without losing them.
@theimaginationgamer3851
Жыл бұрын
That is soo useful thanks.
@JonMcPhalen
3 жыл бұрын
Tip: You don't have to use the EXACT value from the resistor calculator -- using the next highest from a set of standard resistor values will work just fine. I always recommend these values to my friends just getting started in electronics (and I have two boxes designed for fishing lures that hold these values for me): 100, 220, 330, 470, 680, 1K, 2.2K, 3.3K, 4.7K, 10K Resistors are cheap insurance for your LED projects! Have fun -- like Svetlana does -- and your projects will be a hit! Buy Svetlana's books! :)
@BboyKeny
Жыл бұрын
This is because in physics we approximate every thing like e = π = 3. This is very offensive to mathematician.
@PeterNebelung
Жыл бұрын
Most people don't realise that even in the same rating, they vary as much as 10% higher or lower (Silver band). Best you can do is 5% with the gold band.
@briancampbell179
11 ай бұрын
You may get lucky and be able to get away without a current limiting resistor, but if you don't want to rely on luck, use one. Also, don't try to connect LEDs in parallel and try to run it off a single resistor. If you try, you'll probably find one LED will light and the other wont.
@kennmossman8701
11 ай бұрын
@@PeterNebelung you might be thinking of carbon comp resistors they are long obselte
@minimaltrace
8 күн бұрын
Watching this video, while giving me 1 or 2 answers, have presented me with about 15 new questions and this seems to be literally the only channel on twitch or youtube that comes even close to a place where one might ask and actually get answers.
@Galnyi
3 жыл бұрын
A comment to 17:27 : This method will reduce the brightness of the LED if you use the 3V battery. That schematic will work with the 9V battery as long as the LEDs are ~3V. To make the 3V battery version work optimally you could simply parallel connect the LEDs insted (they are serial connected in the example). Also if you dont want to have to worry about changing/charging your batteries that often, could you parallel connect batteries together as well. Parallel connecting batteries will do nothing to the amount of voltage and such you will get on the circuit, it will just make it last longer (like the whole con day if you do your math). You can also get battery holders that already do that for you. Another thing is that it's more commonly/universal to add a switch/break on the red wire aka after the + part on the battery. But doing so on the black wire works fine too. Also electronics are usually made to handle a roughly 5-10% +/- or something in voltage (may say so in the specifications of the LEDs or such), because it's not always that easy to get exactly the voltage you desire. Cable lengts/thickness can throw that off so since the cable has resistance as well. Anyway, Buy Svetlana (and Benni's) books! Keep up the good work!
@ElectrcRadiation
3 жыл бұрын
As soon as I saw the schematic I was thinking the same thing xD this should be pinned for sure
@peircedan
3 жыл бұрын
Don't connect batteries in parallel. The terminal voltages vary potentially resulting in high circulating currents. At best this will shorten battery life and at worst could result in excessive heating.
@rangerhawk
2 жыл бұрын
@@peircedan Could also cause the battery to leak.
@nheather
Жыл бұрын
Not true - they would not work at all, the LED needs a volt drop across it to work. That volt drop is the same for all levels of brightness it is the current that determines the brightness. So three blue LEDs in series need a battery of at least 9V and if more than 9V you will likely need a resistor to drop the extra voltage. As you point out when connecting a number of LEDs it is much better to connect them in parallel - in this way you could have three blue LEDs running off a 3V button cell - in fact she did that when she was holding them on the battery in the beginning. Another advantage of parallel over series is that if one LED were to fail only that one goes out - in a series circuit all would go out - think old fashioned Christmas Tree lights. Although you can get away without a resistor with suitable choice of better it is better to use them. Two reasons - you have control over the brightness because the resistor sets the current through the LED and you can drive different coloured LEDs off the same battery easily. For example, at the beginning she had two blue (3V) LEDs attached in parallel to a battery - they were working, but when she added the red (2V) LED it lit but the two blue LEDs went out. The reason for this is that the RED LED was forcing the circuit to be 2V, the residual 1V was being dropped across the battery's internal resistance (which isn't a good idea). Because the circuit was clamped at 2V there was not enough voltage to turn the blue LEDs on. But had she included a resistor on the red LED then all three LEDs would have lit.
@dannydavis66
Жыл бұрын
Came here to comment this... Glad i read before i made a fool out of myself
@shiroiokami5246
3 жыл бұрын
Thank you so much, I just needed a tutorial to understand how LED works I was totally clueless before but I absolutely wanted to insert LED in my next cosplay
@lxshwa
2 ай бұрын
This was the first actually simple LED noob tutorial I could actually follow. Thank you for exposing everything in such detail an also for showing exactly what you use. I’ve never done anything like that and this has been a big help
@CreepyClayCave
Ай бұрын
VIELEN DANK! Endlich jemand, der dieses LED -Thema anschaulich erklärt.
@PortalFPV
3 жыл бұрын
Pre Tin everything you're going to solder. Will make things so much easier
@brankin421
3 жыл бұрын
Tin?
@br-v388
3 жыл бұрын
@@brankin421 Tinning is the act of melting solder onto something, so 'pre-tinning' means melting some onto both components you are trying to join so you only need to bring them together and apply heat. Can be hit or miss.
@BluesAlmighty
3 жыл бұрын
I was thinking the same and I am sure Mark covers that in the proposed KZitem tutorial 😉
@lasermouth
Жыл бұрын
Wow! LEDs have always mystified me. You just dumbed it down for me perfectly. Thank you so much! Love your presentation as well. Very fun and encouraging.
@Justrex01
3 жыл бұрын
The perfect beginners intro to LED's. Thank you, guys! I can't wait to put some lights in my next cosplay!
@KamuiCosplay
3 жыл бұрын
Yes show us some pictures when you're doing it!
@sarahdillman7069
2 жыл бұрын
Thank you for not leaving anything out or hoarding your knowledge, this is so helpful.
@Balladearest
2 ай бұрын
This is SO helpful! I am starting my next cosplay very soon and this tutorial is super easy to understand! Thank you!!!
@StevenNitsch
11 ай бұрын
I just started watching videos on LED installations for a project I'm planning, yours was the second one I've seen. Your way of breaking down a installation made it seem so simple. And you know sometimes the simple way is the best way. The project I'm planning is a wood carving of a painting that has neon lights on it. I plan to use Led lights hidden in the wood to light up the neon arrows in the painting. And also have blinking orange and yellow LEDS reflex off the wood wall to look like fire.
@traviss3913
3 жыл бұрын
LMAO at the tip cleaning. This video was perfect, thank you for giving me the confidence to build better stuff.
@BariumCobaltNitrog3n
3 жыл бұрын
I think understanding Ohm's Law is a great tool to understanding the relationships between volts, amps and resistance, which will tell you instantly what size battery and resistor to use for any number of led's. All you need to know is the volt requirement or forward voltage of your particular led and use fresh batteries. You could light the poor little single led for a week, instead of letting the smoke out, with just one resistor. It's also good to know how many amps the led really really wants, cuz it's not the volts that kill you, it's smoking! You have great videos with clear, easy to follow steps and an awesome attitude!
@K3ns4i
2 жыл бұрын
I really needed this video, not for cosplay but for gundam and scale modelling :D . Thank you very much!
@jiromuchizuki7892
Жыл бұрын
Thank you so much. I want to make a book nook with LED lighting and your advice and encouraging words make me feel like I can actually do it.
@arthurlodbrock2549
Жыл бұрын
The cutest introduction to LEDs and soldering. Thank you for video!
@VoiceMyDreams
8 ай бұрын
EXTREMELY helpful, excited and confident to try it myself!
@skyrider4789
Жыл бұрын
Thank you for this video (and so much of what you do). I love your & Benni's energy. Fun & informative. A treasure for the community world-wide! ❤from So. Cal!
@LadyJazalea
3 ай бұрын
12:15 "You can clean it up a little bit afterwards, because it looks like CRAP!" 😂 You crack me up!
@AlyssaJartsev
3 жыл бұрын
Thank you for this tutorial! I never was interested in LED before, but this tutorial actually wants me to try it myself
@lawrenade
3 жыл бұрын
Having no idea about electronics, I’m sooo happy to come across this. Always inspiring, thank you Benni and Svetlana ❤️
@shazshanaa6425
2 жыл бұрын
I have looked at so many videos on how to lights and end up confused by their use of overly tech talk to which they think is basic but I understood every word you said and now I want and cant wait to add lights to everything, I am so excited. thank you, thank you!
@kllstkllst5831
2 жыл бұрын
I love everything about this tutorial. It’s all so helpful. Thanks for also including the links to everything you use in the description.
@raugust6786
Жыл бұрын
0:09 CORGI Edit: 22:34 - Two Corgis! Great video! I appreciate the simple breakdown on how to get started with LEDs. Many thanks.
@blackcat49345
3 жыл бұрын
This the content I must have to know and learn
@chrislambert238
3 жыл бұрын
Buy the 2 books on lighting. Well worth it and cosplay or not a great resource
@thearchetype9829
3 жыл бұрын
CREATE A SMART LAMP THAT CAN MOVE TO ANY DEGREE POSSIBLE AND CAN BE CONTROLLED BY YOUR PHONE kzitem.info/news/bejne/w4t83X6rhHhlmH4
@shinythingster
3 жыл бұрын
Thank you so much for this video! I am getting into making dollhouses & dioramas and lighting is so important, but I have been so intimidated by electronics! Thank you for making the basics so easy to understand!
@scifi_dragon
Жыл бұрын
Great video. I'm sure a lot of novice model builders will find it very useful. I've been installing LED lighting effects in model spaceships and ray-guns, phasers, and such for years - I wish this video had been around when I first started, it would've made things so much easier. Thanks for putting in the time to make this video. BTW, great cosplay outfits!
@jesspaterik
10 ай бұрын
I’m just starting out with model making and this was incredible!! So thankful for strangers on the internet who have figured this stuff out and are generous with sharing their knowledge 👏🏻♥️
@MarissaFloro
3 жыл бұрын
the first circuit: totally me the final circuit: almost me but with use of duct tape and tears
@sansakka
2 жыл бұрын
thanks a lot for this video, even for someone like me who never did electronics it sound really clear and I'm now hardly waiting to try it by myself
@Amanda-if7ey
3 жыл бұрын
I've watched a lot of videos about using LEDs and this was one of the best at making it simple and easy to understand. Great work!
@KamuiCosplay
3 жыл бұрын
Glad it helped!
@saxofunk
Жыл бұрын
Use flux core solder and tin your parts before joining them to help them join more easily. I use 63/37 or 60/40 lead/tin solder. Even though it has lead, the temps required are much lower than lead-free, which also helps you make better solder joints.
@mikajansson1243
3 жыл бұрын
Your videos are a MASSIVE inspiration!! And - not for Cosplay, but for Halloween decorations!!! Amazing ideas, materials, designs, creativity - THANK YOU SO MUCH for sharing!!!!! Surprisingly few people use foam and foam clay in the world of Halloween decor, but I think you could create the most stunning, movie-set quality stuff (think Gargoyles with light and smoke, Gothic doorways with skulls, lights, etc - and a million other wonderful things!). Halloween is getting bigger in some parts of Europe, and hey - costumes & Halloween are best pals :-) Remember Halloween is not just "American commercial nonsense" - the roots of Halloween are in Samhain, which was the festval of dead for ancient European Celtic people. And for example in Finland we have "Kekri" - similar day of the dead in October, with costumers and fires to drive away bad evil spirits...So lets make Halloween into "Euroween" and OWN IT. :-) Bless!!!
@nicolewolcott
Жыл бұрын
I am just so glad I found you, not only are your cosplays amazing, but your explanations for the LED's vs resistors are awesome too. I'll use your advice with my Fallout 3 pip boy model I'm printing!
@annamariajung
3 жыл бұрын
FInally, a tutorial for my absolut beginner level! I love it, thank you so much
@Bob-ip4mx
3 жыл бұрын
Excellent video, got me wanting to get back into creating props again, simply explained, love it
@WvIENS
Жыл бұрын
this, this is what iv searched weeks for!! thank you , you have made my lighting boss
@mmustangg2
3 жыл бұрын
Loved this video. I appreciate that you slowed the pace and weren't as over the top. Very well done!
@perttisalminen6357
Жыл бұрын
I love your way to keep things simple.
@joyflg1rl
Жыл бұрын
Thank you so much for this tutorial. You're really demystified the process. I am grateful.
@MarquisdeL3
3 жыл бұрын
These videos are super helpful because they keep reassuring me that I can do LEDs if I want to, even though I find electronics super intimidating. Thank you so much.
@jamesmurphy1095
2 жыл бұрын
Love the channel! Just a tip for you. If you are going to use a lighter to shrink the heat shrink, don't use the tip of the flame. That is what will burn and scar the wire. Use the center of the flame where it is blue. Works best!
@rilgibson299
Жыл бұрын
Most helpful tutorial online, you are a lifesaver! Can’t wait to level up my Hatsune Miku cosplay with these :3
@devilmecare
Жыл бұрын
I keep lots of old electronics for parts. You have motivated me to start being creative. I soldered airplane electronics for a living.
@AstrocyteCosplay
3 жыл бұрын
Thankyou! So helpful and basic for those that haven't even touched on LEDs get. Have the book but it's great seeing video of the actual process as well. Can't wait to start doing some LEDs in my cosplays.
@TempestStrife
Жыл бұрын
This was just enough to help me get started on adding led into my doll. Thank you.
@seven6pro
2 жыл бұрын
Excellent video. As a electronic non-savvy girl, you made led connections very easy to understand. Thank you!
@ionostro
3 жыл бұрын
Your super fun and cheerful video, thank you. I made my first "mini costume" with LEDs back in 1985, with a tiny red LED, I took it from an old Walkman ... I glued the LED with a tape on my forehead, I hid it behind my hair, using that thin wire of enameled copper that comes in electrical transformers, that thin, spirally wound wire was easy to hide under my hair, around my head, over my ear and down the back of my neck to my shoulder, and into my arm was the pack of two AA batteries, and the cables reached my hand, where I had two metal plates tied with a rubber band to my thumb and forefinger ... so I could turn the light on and off ... when we went out at night, when partying with my friends, I used to make a small blink with the LED ... and people were confused, not knowing if what they had seen was real, they usually asked me and I said "I don't understand about What are you talking?!"
@KamuiCosplay
3 жыл бұрын
Ha ha ha, that's a really cool story! Thanks for sharing it! I'm hope you still enjoy crafting and electronics! :)
@CrankyPantss
3 жыл бұрын
Well done. This basic tutorial was a great overview to get people started, just as it was intended to do. Thanks for sharing this with us.
@KamuiCosplay
3 жыл бұрын
The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: skl.sh/kamuicosplay12201 Thanks again to Skillshare for sponsoring this video!
@dougmulle2627
Жыл бұрын
I've played with LEDs pretty much the same way you did. I've watched a dozen videos of guys trying to explain all the technical mumbojumbo. None did it as well as you!! And none had the pretty smile or bubbly attitude either
@raywhatsthisfor1283
3 жыл бұрын
So many different applications for these little balls of light!!! Costumes and weapons for things I cant even remember!!! You guys could make some of the coolest costume additions for little kids Costumes!!!!
@seme
3 жыл бұрын
Fantastic entry video to the LED world. Thank you so much for providing all these high quality video contents! :)
@KamuiCosplay
3 жыл бұрын
Our pleasure! Glad you like them!
@sewlittlemouse6365
3 жыл бұрын
just bought the book yesterday. Can't wait for it to show up.
@KamuiCosplay
3 жыл бұрын
Hope it arrives soon! :)
@wondernore
2 жыл бұрын
Thank you so very much for making these videos, you're informative and humble as well as friendly and entertaining. Much appreciated🌟🍻
@gregorcykf
Жыл бұрын
Followed you forever on insta. So looks like LED's, Fabric, and Foam are the items you can never have enough of
@HappyHermitt
3 ай бұрын
I love to play with LEDs. I have many ideas but have not tried them yet. I like using ICs and MCUs.
@seamooncosplay
3 жыл бұрын
Do you guys ever plan to cover a tutorial on moving parts using servos? Would love to see how you can implement those into cosplay.
@tonyromano6220
Жыл бұрын
5v.
@davidesbardellotto6909
3 жыл бұрын
Corgi, Corgi, Corgi i love all you! you are a great source of inspiration 💜💜💜
@nataliewicklund3421
2 жыл бұрын
Just amazing! I started following you on tiktok last year for your props and cosplays. Now suddenly I needed to build something and I immediately turned to your youtube page because I knew you'd have all my answers! Thank you~
@krzysztofmathews738
Жыл бұрын
This is an excellent demonstration. Very clear and well presented. Thank you!
@doxten1
Жыл бұрын
She Is inteligent and beautifull , AND i love her work AND that she does .
@Michael_Moon4242
3 жыл бұрын
Very nice! For improving your soldering skills, you should use soldering paste. It will make the flow of the tin much smoother. Also when soldering, do not hold the the iron first to the tin but instead heat up first the wire and the soldering joint properly, then let the tin flow over it.
@shaunramkissoon2
8 ай бұрын
The explosion from Lethal Weapon made me literally laugh out loud. Nice editing.
@shedroids
Жыл бұрын
Fantastic! Thank you for sharing!
@mdlovejoy
Жыл бұрын
Hey! Thank you for posting this! You just walked me through a project I was thinking of start and made it sound way easier than I thought it would be. Thank you!!
@Cheeky_Chelsea
2 ай бұрын
seeing your solder joints working even though they're not *technically* that good is really inspiring
@dk-jy3ug
Жыл бұрын
You should really use limiting resistors with the LEDs. Connecting them directly to a power source like that will shorten their lifespan.
@voidseeker4394
Жыл бұрын
It depends on the power source. To be precise, all LEDs actually care about current, not voltage. With 3v low current source, like that coin barrery, they'd probably be fine. But with more beefy power source - yes, you need to tune curent with a resistor, or even use active curent driver.
@sarinavergeer-d6u
11 ай бұрын
i love everything about this video! love listening to you and you explain this perfectly!
@phillipchronister7035
3 жыл бұрын
Great video! I build a lot of models and have been hesitant to include LEDs in them. This really helped a lot, thank you!!!
@Zoomzoomvenus
3 жыл бұрын
Ive been following you for the longest!! Im finally have the courage to start this! I love love your costume ❤ 💕
@ckraut1771
Жыл бұрын
Thank you so much for this vid! It's gonna help me sort out everything for my LED set up in my 3d scepter print for my lady loki
@Vanillepferdchen
3 жыл бұрын
This is such a helpful tutorial! Amazing and easily understandable. I just need to find a matching cosplay to use this knowledge. Also, gotta love all those special effects!
@johnnysideasofthings3809
Жыл бұрын
I love you, you save my life with this projects. Yiiiiiiiieeeeeeeeeiiiiiiii!!!!!!
@ICH-bin-Baerchen
3 жыл бұрын
I actually understood this! AMAZING, THANK YOU 😭❤
@aiman156
3 жыл бұрын
For those who like to scavenge parts from broken electronic items, the LEDs you pick out might have their legs shortened. In that case a way to know the poles is to look inside the bulb. The negative pole is usually the part that looks like a flag. Remember, the only positive flag is the Swiss flag.
@troycasten6742
Жыл бұрын
Legend.
@kennmossman8701
11 ай бұрын
NOTE LEDs can be damaged by excessive soldering. The soldering/de-soldering would be done 3 times. Clip an alligator clip on the lead between the LED bulb and solder joint helps.
@UmmerDr
3 жыл бұрын
I always love your content, but have to correct you on not using resistors in combination with LEDs. A led a basically a short circuit and will draw as much current as can be provided by the battery. In your examples you rely on the voltage dropping and the max current the battery can source. Please always use a resistor calculator for any led you are using and install a resistor. Most LEDs are most happy between 10 an 20 mA. The voltage is determined by the color of the led.
@KamuiCosplay
3 жыл бұрын
In theory yes, you need a resistor. However I install my standard LEDs now for 17 years and never ever needed one, no matter the color. None of my LEDs ever were damaged and I never had any issues with this kind of setup. So to keep things extra simple and make LEDs less intimidating, I personally don’t recommend using a resistor if you use the right battery. :)
@UmmerDr
3 жыл бұрын
@@KamuiCosplay if you would measure the current from your battery you might find that with the correct resistor you would actually reduce/limit the current and therefore extend the battery life quite a lot! I've been using LEDs in all kind of electronic projects and PCB designs for over 40 years, and learned from a very young age to use resisors.
@peircedan
3 жыл бұрын
@@KamuiCosplay Without a resistor your circuit will be unreliable, the draw on the battery will be inconsistent and you could likely shorten the life of both the LED and battery.
@patchtechuk
2 жыл бұрын
@@UmmerDr If this was run inside a prop would you leave the resistor exposed outside the tubing?
@UmmerDr
2 жыл бұрын
@@patchtechuk In general, no. I would select a resistor with the appropriate power rating. If the power rating is high enough, the resistors tend not to get to hot, especially with the small LED's that only draw around 10~20mA. The formula's used for LED resistor values are; V = I x R (Voltage equals Current times Resistance) R = V / I (Resistance equals Voltage divided by current) I = V / R (Current equals Voltage divided by Resistance) P = I^2 x R (Power equals Current-squared times resistance) Keep in mind that the voltage used in these formulas is the voltage drop over the resistor, and not the battery voltage. If you have a red LED that has a forward voltage of 2V (specified by the manufacturer) and an optimum current of 20mA, and you have a 3.7V battery; Voltage difference between battery and led => 3.7 - 2 = 1.7V Resistor value required R => 1.7 / 0.020 = 85 Ohm Power dissipated by the resistor, 0.02 * 0.02 * 85 = 0.034 W (34mW). Most common resistors are rated for 1/8W (125mW) This will not heat up the resistor much and can be safely build into a prop. When using high powered LEDs (tri-cree) as used in many lightsabers for instance, you need to have high power resistors. They still can be build into a prop, but enough heatsinking to the outside should be considered (copper or aluminium parts near the resistors that can transfer the heat to the outside). Using resistors that are of a higher rated power (factor 10) than what is required, will also help them to not get to hot, although they still dissipate the calculated power. Hopes this helps you
@sebastianp2300
3 жыл бұрын
You have no idea how happy I am to see this video. 👍
@livewire4495
Жыл бұрын
Svetlana, Love your Content! Your production is seamless. 😎
@starleen1981
3 жыл бұрын
Let's honour with a minute of silence the poor LED that sacrificed its life in the name of knowledge. May its shining spirit go to the LED heaven. Thanks to its generous offering more LEDs will survive in untutored hands of beginner coplayers. Rest in gleam, wee LED!
@papayork1907
3 жыл бұрын
you are very helpful and fun to watch, great energy
@DnD_Adventures6966
Жыл бұрын
You're such a geek and I love that! Thank you for the video.
@krispykicks7766
Жыл бұрын
THANK YOU SO MUCH FOR THIS VIDEOOO!!! It's so straightforward and helpfull thank youuuuuu !!!
@mururoa7024
9 ай бұрын
I'm not at all into cosplay (I had to google what it was) but this LED tutorial was actually really helpful and I actually understood everything! Thank you so much!
@lailaeight6670
3 жыл бұрын
Could you make a video about LED foam especially? Like how you can paint it that the light is still bright enough and that stuff
@milquest
3 жыл бұрын
Thanks so much for this vid, it makes things so much easier for me to wrap my head around. Now I want to start experimenting :)
@djrichylaurence8991
8 ай бұрын
Svetlana would make a good TV presenter. Very perky and interesting to watch.
@niconine268
Жыл бұрын
Yes. I dig this tutorial too
@ManAtPlay
4 ай бұрын
Super easy explanation! Thnx
@SteelKingThor
Жыл бұрын
Thank you so much for your hard work and inspiration. You and Benny are awesome. I'm Definitely buying your LED build book soon
@suzeshore
2 жыл бұрын
Thanks for this really clear breakdown!! I'm planning on trying out LEDs for the first time and after this video it feels exciting instead of scary :)
@froginhotwater4806
10 ай бұрын
What a great video. Your hands are lovely and they make amazing things. Thank you.
@Samp26789
Жыл бұрын
WOOW~👍 👍 How beatiful ~ a long thime my ssam(teacher)~ Thank you ~ya.hoo 💐 ㅡsouth korea🇰🇷 ㅡ
@tonyromano6220
Жыл бұрын
Oh what an adorable dog!
@johngarnicajr64
11 ай бұрын
What a great tutorial. I’m ready to add some lights to my Halloween animatronics now. Thank you.
@TheTruthHz
11 ай бұрын
I 100% recommend tinning the wires and components first. This means adding a little solder to the wire BEFORE you make the final connection to the component terminal. This has the benefit of preventing the individual strands from fraying and gives a greater chance of ensuring you don't get a cold joint that will break easily
Пікірлер: 671