No harm, no foul. We all do things that makes us feel bad. Looking forward to the test 2.0 to come out. Take care
@jims_junk
2 ай бұрын
Thanks!
@burntoutelectronics
2 ай бұрын
Im keen to see the performance difference shown between v2 and v3 PCIE
@jims_junk
2 ай бұрын
I'll be sure to add a couple examples of that in the beginning of the video before getting into the rest.
@mrvomit101
2 ай бұрын
I can admire your dedication to have the best results.
@jims_junk
2 ай бұрын
Thank you
@achaycock
2 ай бұрын
I did think that the results were odd. I have both cards, but my RX550 does have a larger heatsink which I thought affected things. Thank you for the update.
@jims_junk
2 ай бұрын
....ohhh and this heatsink sucks! lol Found out there's essentially two versions of the rx 550 oem card. One with a 64 bit bus and another with 128 bit. I have the 128. So its no different than the full sized card, just with a tiny heatsink. I have another heatsink that I'll probably be modding to fit.
@JamesSmith-sw3nk
2 ай бұрын
I am surprised! I didn't think PCI-e 2.0 even on the x8 bandwidth of the rx 550 would have made much difference on entry level card like the rx 550. I look forward to the new video.
@Compact-Disc_700mb
2 ай бұрын
No problem. Now we have perfomance numbers for rx 550 and gt 1030 on PCIe Gen 2 which is useful to compare against gen 3 numbers!
@abunk8691
2 ай бұрын
I like the integrity for admitting the fault and apologizing and taking down the other video. So much media nowadays leave the wrong info up or just make a later video adressing it but doesn'r rectify the issue in the first place since not much people see the apology video. I will be waiting for the updated one. Also learned that GPU-Z doesn't show the actual link speed unless a GPU is under load. A while back and that was weirding me out why an RX 560 was at PCIE 1.1 so put it under load and saw it go to PCIE 2.0 (H81 board caused this limit).
@thlsikbtr
2 ай бұрын
can't wait the new vid man
@kyraiki80
2 ай бұрын
Could you include the previous 2.0 results in the new video?
@emoboy2008
2 ай бұрын
So glad I got to see the vid :P You're such a cool guy, love your content!
@SwampyF4RT
2 ай бұрын
Looking forward to the redo
@ELEMI28
2 ай бұрын
I really enjoy your videos and i'll be waiting the new tests with pcie 3.0, i'll send you a big hug from Argentina.💪🇦🇷
@jims_junk
2 ай бұрын
LOL Thank you!
@martinkoyle
2 ай бұрын
Meh, shiz happens. Look at it this way, least you're more honest than our media. Anxious to see the update, also will be interesting to see the difference 1 pcie version makes. Cheers!
@jims_junk
2 ай бұрын
Thank you!
@Artemis_WR
2 ай бұрын
is not a biggie, but at this point i'd like to see the 550 in pci-e 2 vs 3 too
@jims_junk
2 ай бұрын
sure no problem, I was thinking about adding a few of those bench's at the beginning comparing the 550 with 2 and 3
@venix20
2 ай бұрын
mistakes happen and well such a mistake would not even register with most since pcix3 was around since forever
@dabombinablemi6188
2 ай бұрын
Considering that GN had a scam 1GB 650ti perform similarly to the GDDR5 GT 1030, and that the RX 550 is definitely far faster than that...fully expecting the GT 1030 to fall far behind.
@ecchichanf
2 ай бұрын
More videos from you is a plus :3
@MrEdioss
2 ай бұрын
That's the benefit of overclocking, it shows hidden benefits and flaws! Keep at it, I will be waiting for the video!
@Super123456789Kuba
2 ай бұрын
Wow, so the RX 550 is even better with PCI-E 3? I already thought it was pretty decent card to have, with DX11 games than GT 1030 on PCI-E 2. Plus 2 More gigs to GT 1030... But I'm now really curious how much better it fares against the GT 1030.
@nvidiaplay
2 ай бұрын
thought he gonna put his finger into the spinning fan
@rezamolaee1
2 ай бұрын
Is GPU-Z a reliable way to finding out about PCI express slot generation?
@jims_junk
2 ай бұрын
Yes but apparently you need to have the GPU under a load for it to accurately show. Learned that from a viewer in the comments. Always wondered why some showed and others didn't.
@SwampyF4RT
2 ай бұрын
@@jims_junk there's a load button right next to it in gpu-z. I use it all the time to make sure Gen 4 is working in new builds
@betara_indera_gunung_timur
2 ай бұрын
@@jims_junk you probably already know this by now, but for others who don't, there's a "?" symbol right on the side of the 'Bus Interface" column (in GPU-z) that you can clicked on, where a box with a "Start Render Test" button will pop up. just hit it and the Bus Link speed should then show the max the card (or the slot) can run at.
@jims_junk
2 ай бұрын
@betara_indera_gunung_timur @SwampyF4RT Thank you both for the heads up. I saw the ?, but usually that just loads a browser with some annoying FAQ page or something so I ignored it.
@BittiPomo
2 ай бұрын
goodboy :)
@thesmokecriminal5395
2 ай бұрын
Dw lol
@johnsmith8988
2 ай бұрын
I assumed it was gtx1060 vs rx480 comparison with rx480 having more ram and slightly under performing, but I'm looking forward to the correction.
@ajstechlab
2 ай бұрын
Hey Jim, remember me?
@ajstechlab
2 ай бұрын
So I will be receiving a tech lot soon and I will be making an upload going through it
@AshWeinstein
26 күн бұрын
@ajstechlab You should do like a cathode ray dude or technology connections style where you sit at a desk and introduce what you're gonna talk about. Also include a way people can contact you like twitter or an email contact in your about or a discord
Пікірлер: 39