Definitely be interested in a comparison of glues vs application.
@BigHenFor
Жыл бұрын
Thank you for doing this. Using sheet ply like this makes fabricating basic boxes, and cabinets and shelving much simpler and straightforward. And with not a lot of tools either. Many thanks. Also, please do an episode on glues, because there is a lot of choice, and choosing the right one you need can be confusing.
@kevinchamberlain7928
Жыл бұрын
Plant-on's is simply genius! So simple, so obvious, so easy - and I've never thought of it before! Cheers, Peter!
@Scott-g9t
Жыл бұрын
A true professional makes complex ideas simple. I have so many ideas now. Thank you Peter.
@chipsterb4946
Жыл бұрын
YES to what glues when please! And thank you for the faux dado idea on both sides of a center panel. If the center panel is 6 mil and the added panels are 6 mil also, you end up with an 18 mil center panel. 👏
@dustinwilliamson1250
11 ай бұрын
Yes please for which glue when video!
@10MinuteWorkshop
11 ай бұрын
Already done! 👍
@paulgarriock3898
Жыл бұрын
I'd be very interested in a glue related video - please. Thanks for all that you do, and how incredibly well you do it.
@10MinuteWorkshop
Жыл бұрын
On it, thanks! 👍
@xinixxagnix201
Жыл бұрын
Mr Millard you are a global wood star , plungesaws are now a obsession 🙂😅
@10MinuteWorkshop
Жыл бұрын
😂 👍
@Micha_Ba
Ай бұрын
@@10MinuteWorkshop NOT funny 🙄😜
@DavidGraham-e3e
Жыл бұрын
Definitely interested in glues, after I spent hours researching outdoor glues for an application.
@rickkinney1249
Жыл бұрын
i learn something new every time i watch one of your videos-------thank rick
@Mikey__R
Жыл бұрын
That CA trick is gold!
@andyh126
Жыл бұрын
Excellent - concise tutorial
@jools54321
Жыл бұрын
And it's a yes from me on the "Which Glue When" video!
@stefanbuscaylet
Жыл бұрын
Mostly obvious, but I’ll be darned I wasn’t thinking this way. Thank you Peter as always, your videos give me ideas that i can put to use.
@johnfindlay4360
Жыл бұрын
I did a test on glues for Good woodworking?? ( think it was that ) back in the day - staight lap joints destruction tested - without exception the wood interface was the point of failure ie the wood 'tore' away causing the joint to fail. One of the ones I used was your 10 min rez ;-) I liked it as well
@10MinuteWorkshop
Жыл бұрын
Thanks John! Yes, never had a properly clamped glue joint fail, always the wood. 👍
@Bob-qu5ux
Жыл бұрын
Very nice. Looks very good quality plywood. Suppliers here really took a hit during Covid and the prices went through the ceiling. Very nice informative series, thank you.
@Dunc2222
Жыл бұрын
Agreed, I'm always envious of the high-quality plywood Peter is able to use!
@thekirec
Жыл бұрын
Hello Peter, yes it would be interesting to see a video about glue.
@mrmoto7682
Жыл бұрын
Thank you for sharing this!
@glynprice3815
Жыл бұрын
Nice one mr M. Thanks
@allthegearwithnoidea
Жыл бұрын
Another excellent and informative video, thank you!! Certainly would be interested in a video on the various glues - all knowledge sharing is appreciated 😊
@Toffee8370
Жыл бұрын
Excellent video. Thanks!
@warrensmith2902
Жыл бұрын
Oh my gosh, you gave away all the lazy carpenter tricks!!! And now you know why I don't have expensive chisels and hand planes. Great job BTW.
@10MinuteWorkshop
Жыл бұрын
👍
@billdodson207
Жыл бұрын
Brilliant video - thanks! 😎
@Nduk123
Жыл бұрын
OMG!Perfect for cabinetry!! Brilliant
@willleskin3360
Жыл бұрын
I hadn’t considered making joinery in this fashion before. Thank you for the practical knowledge, Peter.
@mikeking7470
Жыл бұрын
You see it a lot in workbench builds and I saw it in a fancy bookcase build Norm Abrams did on This Old House years ago, the extra thick sides and shelves were impressive and face frames hid all the "cheating".
@willleskin3360
Жыл бұрын
Thanks, Mike
@g0fum
Жыл бұрын
Excellent video. Cheers Peter.
@10MinuteWorkshop
Жыл бұрын
Many thanks! 👍
@Micha_Ba
Жыл бұрын
Did i say before? Peter - Master of easy going 👍 Always a pleasure to watch your videos!!!
@garenne0169
Жыл бұрын
Thanks a lot, smart idea as always 👍
@cerieynon
Жыл бұрын
Once again what a great presentation. Big thanks Peter. 👍
@10MinuteWorkshop
Жыл бұрын
Thank you! 👍
@ALF001Channel
Жыл бұрын
Yes to the glue
@54mgtf22
Жыл бұрын
Hi Peter. Love your work 👍
@10MinuteWorkshop
Жыл бұрын
Thank you! Cheers! 🙌
@AxGryndr
Жыл бұрын
I really need to find a local supplier here in the US that has 12 and 6 mm birch ply. The 6 mm (1/4 inch) ply here is often terrible with very thin outer faces and a single thick center core. This single core often is from near the pith of the tree making it wavy, and often brittle. Having nice, flat and uniform, thin material that isn't MDF would be great.
@10MinuteWorkshop
Жыл бұрын
Thanks! Yes, we’re very fortunate to have this quality of ply available. At a price! 😂👍
@clemmcguinness1087
10 ай бұрын
Thanks for this, a LOT, Peter!
@10MinuteWorkshop
10 ай бұрын
Thank you! 👍
@majenness
Жыл бұрын
Peter .....You always seem to provide very valuable information.
@10MinuteWorkshop
Жыл бұрын
Thank you!
@henryrossouw930
Жыл бұрын
Brilliant ideas.
@jessejameson154
Жыл бұрын
Absolutely on the glue vid Peter.....always important to learn from others 👍
@10MinuteWorkshop
Жыл бұрын
Thanks 👍
@markcopple2870
Жыл бұрын
This was an excellent video. You were on your A game with this one.
@10MinuteWorkshop
Жыл бұрын
Thank you! 🙌👍
@shaun30-3-mg9zs
Жыл бұрын
Thank's for this video Peter, Just what I need to know,Take care👍
@IEnjoyCreatingVideos
Жыл бұрын
Great video Peter! Thanks for sharing it with us 💖👍😎JP
@10MinuteWorkshop
Жыл бұрын
Thanks 👍
@MCsCreations
Жыл бұрын
Thanks a bunch for all the tips, Peter! Really great lesson! 😃 Stay safe there with your family! 🖖😊
@10MinuteWorkshop
Жыл бұрын
Thank you, you too!
@angusthomson7381
Жыл бұрын
All great joints & have there place. But, they all look really great when made with such sweet sheets of ply! Wicked work & guidance as ever Peter. Thanks
@10MinuteWorkshop
Жыл бұрын
Thanks! Yes, love the look of a plywood ‘joint’ 👍👌
@rfriday9532
Жыл бұрын
Enjoyed that thanks Peter
@bootsmclaughlin1438
Жыл бұрын
Brilliant as always bud
@10MinuteWorkshop
Жыл бұрын
Thank you! 🙌
@ronboe6325
Жыл бұрын
I need to keep these ideas in my back pocket as even for experienced wood hacks, these can be godsends in some applications. Thanks!
@10MinuteWorkshop
Жыл бұрын
You are welcome! 👍
@graveurgraveur2691
Жыл бұрын
Thank you maestro!
@DavePawson
Жыл бұрын
Very neat Peter. Cheating? No. Some good joints.
@BischBaschBosch
Жыл бұрын
I had it up to here (levels hand at forehead) with KZitem fakery! This ones quite good though. Useful hack for some I'm sure👏👏
@10MinuteWorkshop
Жыл бұрын
I know right! KZitem phonies everywhere these days, Stew. 🤷♂️
@WoodworkJourney
Жыл бұрын
Good stuff Peter 👍
@10MinuteWorkshop
Жыл бұрын
Cheers Dean! 👍
@dwp2659
Жыл бұрын
interesting approach - never thought of doing it like this
@NPOAfterMidnight-ft9zj
Жыл бұрын
As a noob, this is fantastic!
@10MinuteWorkshop
Жыл бұрын
Thank you! 🙌
@Onlygloo
Жыл бұрын
A very useful video! 👍👍👍
@normanbott
Жыл бұрын
Really good video this one ! I've seen a couple of KZitemrs make their benches using the 3 'ply' lamination scheme to create all the components, using just a tablesaw.. If I were to make another bench I'd adopt this methodology for ease and accuracy. Lamination's good for using up scraps to get a custom dimension.
@10MinuteWorkshop
Жыл бұрын
Exactly! I used thie method when I made my portable benches. 👍
@ralf-de
Жыл бұрын
thanks for the great tipps ... looking forward to my next project :)
@philfitzgerald8449
Жыл бұрын
A tiny sprinkle of salt will stop pieces sliding around when being glued.
@G.I.JeffsWorkbench
Жыл бұрын
Yes, please do a video of the which glue when to supplement or complement your fact sheet.
@llamedosr7843
Жыл бұрын
The dovetail 😊
@andyc972
Жыл бұрын
Thanks Peter, it's interesting to compare and contrast these methods and has got me thinking about how I might use both, along with more traditional hand-cut joints in future. Always good to have a rethink and consider all the options every once in a while ! I have some workshop mobile workstation projects coming up, and I'm thinking I can cut down on some bulk by utilising some of your compound plywood joints whilst eliminating racking issues too !
@10MinuteWorkshop
Жыл бұрын
Nice! I used the ‘fake’ half-Laos when I made the legs for my portable benches, works great! 👍
@parrot340
Жыл бұрын
Yes please would love a vid on glue :) thanks
@wilf.tanser9961
Жыл бұрын
Drawer fronts - I use a handle or two to hold the false Front in place. Me thinks there needs to be a Peter Millard / 10 Minute Workshop 'notebook' published.
@lexluthier8290
Жыл бұрын
Another great 'how to', thanks Peter. BTW, where do you get your plywood? It looks top quality compared to the skip-filler my local Wickes usually has 😐
@10MinuteWorkshop
Жыл бұрын
Thanks! I buy from a local yard, ajferguson.Co.Uk - good yard, good people. 👍
@Rene-Hernandez
Жыл бұрын
Which glue when video, please!
@rh9915
Жыл бұрын
Good stuff
@greenhilldesign
Жыл бұрын
Hmm, those screws potentially splitting. Good video. I invested in a domino DF500 years ago and so use the domino KD joints. I think the real benefit of the zeta is the tenso for fitting face frames and scribe panels. I used to biscuit these years ago but domino these too. I guess once you invested in a tool no point having both. Good to see it's an option to open up for the DIY market though
@colin5021
Жыл бұрын
I definitely need a glues explainer, I keep getting stuck deciding which for when!
@10MinuteWorkshop
Жыл бұрын
😂👍
@davidcowperthwaite1159
Жыл бұрын
Yes, I would like to see 'which glue when' video
@chrishickman9738
Жыл бұрын
me too for the glue :)
@alholston-smith7631
Жыл бұрын
I wouldn’t call these joints “fake”, they are rea joints, stronger than most, just built in a different manner. Grand example of how to simplify work in a string a creative manner. I have been doing this for years, and not just with ply, but you can do the same with solid wood too. Cheers
@10MinuteWorkshop
Жыл бұрын
I think that's a point I make in this video, and re the 'fake', thats just how the algorithm works... 👍
@davey820051
Жыл бұрын
I remodeled a kitchen several years ago in which the original cabinet shop had used this technique to create all the face frames from two plies of solid oak rather than mortise and tenon or pocket screw joints for the usual single ply. The fit and finish of the cabinets was quite good, and the cabinets had held up well. I was quite surprised to see this trade off of extra material for some savings in labor; the doors were five-piece with raised panels, and at the time the cabinets were built, it would have been unheard of to outsource doors and drawers, so the cabinet maker must have had some skilled people on staff (but perhaps not enough of them).
@sitrepx2734
Жыл бұрын
Glue? get some Everbuild 502 can be used for external pieces, good working time, dry in 2 - 4 hours .... there saved you a video :)
@bigmonkey999888
Жыл бұрын
Hi Peter yes please a comparison will be most useful Steve
@hookedonwood5830
Жыл бұрын
I guess the only consideration is to have a flat surface to rest the pieces on as the thin material might conform to the support while the glue cures - but besides that it really offers some neat solutions.
@10MinuteWorkshop
Жыл бұрын
Yes good point, thanks Denis! I really like how,it looks too! 👍👌
@riba2233
Жыл бұрын
Yeah I would like to hear your take on glues :)
@mikeking7470
Жыл бұрын
Very pretty with the multi-ply.
@ianamck
Жыл бұрын
Which Glue When - YES PLEASE
@nickglover
Жыл бұрын
I suppose with plywood, there's really no difference between "real" and "fake" joints as it's all just veneers glued together anyway.
@e.bertrams
Жыл бұрын
Glue video: Yes please!
@10MinuteWorkshop
Жыл бұрын
👍
@steven_vogt
7 ай бұрын
Love the dovetail idea! Although I can’t see myself managing that one with a track saw 😂 Could it be done, really?
@shabazer
Жыл бұрын
0:45 that glue slip, happens to me all the time
@projectrebuild908
Жыл бұрын
They all look as good as the "traditional" joints.
@10MinuteWorkshop
Жыл бұрын
Thank you! 🙌
@stevebosun7410
Жыл бұрын
Hi Peter, another vote for "which glue"?
@fumthings
Жыл бұрын
with the dovetail mortise and tenon, i would prefer to make a bridle joint so it would be clear to the new owner that, no, this wont just come apart!
@10MinuteWorkshop
Жыл бұрын
Assuming the owner isn’t you, then sure. 👍
@GroverButz
6 ай бұрын
I find this approach looks fascinating and may try it with a small project myself. But I find myself asking why? I want to try it because it looks interesting - but is there a use case beyond that? Not being sarcastic at all, genuinely intrigued.
@10MinuteWorkshop
6 ай бұрын
It's a really easy way to make strong joints just using sheet materials, so it's accessible to anyone with a simple toolset eg just a tracksaw, as well as letting them discover the bascs of traditional joinery - increased gluing are etc.. etc.. for themselves. 👍
@brucelee3388
Жыл бұрын
When gluing a couple of pieces together that keep wriggling about, just sprinkle on a pinch of sand, salt or sugar - whatever is on hand, rather than CA glue which has almost inevitably set hard when you go to use it again (or, if you keep it in the fridge, you have to wait for it come up to room temperature if its still liquid). Then apply your clamps.
@10MinuteWorkshop
Жыл бұрын
Funnily enough I have CA glue in my workshop, not salt. Weird huh? 🤷♂️
@ianmurray3820
Жыл бұрын
Hey pete.! I’m not convinced..!! Maybe you could break out the sliding bevel and the vintage hand tools and give us a direct comparison of traditional hand tool v machine tool joinery..? Also is a mixture of flour and water a viable alternative to PVA…🤪😁💪🏻
@10MinuteWorkshop
Жыл бұрын
Wallpaper paste - it’s all you need! 😂👍
@ianmurray3820
Жыл бұрын
@@10MinuteWorkshop Hey Pete.! Have you ran a makita tracksaw,? I’m looking for better dust collection than the old Titan provides but can’t quite run to a festool, buy a parce are currently selling the corded version for £250 and I’m tempted……Any thoughts?? 👀
@gingerelvis
Жыл бұрын
Any chance of a back to basics hand tools only joinery edition? There's something satisfying about doing it (when you get it right!). I don't do it very often in all honesty, usually my extent is hanging doors and morticing latches but it's a great skill to have where you can't justify a router and setting up a mitre / track saw.
@10MinuteWorkshop
Жыл бұрын
I’d need a lot of practice before making that video! 😂👍
@stephencave187
Жыл бұрын
How about a fake mortise n tenon where the tenon is a dovetail? That would be unique to fake joinery and unable to be pulled apart in any direction. Dunno about the practicalities of using such a joint but it sounds cool in my head 😊😊
@10MinuteWorkshop
Жыл бұрын
I do exactly that in this video! 🤷♂️
@stephencave187
Жыл бұрын
@@10MinuteWorkshop I watched it a couple of days ago....maybe that's where I got the idea from. Ooops 🫣🤗🤣
@negotiableaffections
Жыл бұрын
'Fake/cheat' joints is a little unfair. I think many 'makers' without the burnt-in skills of a lifetime's training in carpentry or even those having to work with budget equipment [not always the most accurate] would find these...'techniques' [shall we say] a very efficient and achievable way to get the job done. This video would make a great workshop wall poster and I for one will be referring to it until I get the hang of these joints - and that too, shouldn't take long. Cheers Pete.
@Mikey__R
Жыл бұрын
Definitely! Even Chris Schwarz used this technique to make tenons in his Workbenches book. Craftspeople who know how to cut perfect joinery might "cheat" on occasion to save time and effort. It's a useful skill to learn!
@10MinuteWorkshop
Жыл бұрын
I used them when I made the legs for the portable benches - and I still thought it was cheating! 😂👍
@negotiableaffections
Жыл бұрын
works though!@@10MinuteWorkshop
@Size15s
Жыл бұрын
Rare do those in YT videos name drop the lengths of the pins they use. Am I wrong to aim for the thickness of the pinned panel + half the thickness of the receiving panel?
@10MinuteWorkshop
Жыл бұрын
I think that’s because it’s more of a personal preference. With eg the drawer front, I wouldn’t want to pin through 12mm into 6mm just because with an 18mm pin there’s too much chance of the pins popping out in the face, and a 15mm pin would only go 3mm into the face material. But as a broad guide then yes, half to three quarters the thickness of the receiving panel, plus the thickness of the pinned panel is a good rule of thumb. 👍
@Size15s
Жыл бұрын
@@10MinuteWorkshop thanks!
@AlexInASmallTown
Жыл бұрын
I had no idea what to expect from the title. What's a fake joint?? Guess now I know. 😅👍
@o0leRAY0o
Жыл бұрын
Who else saw the top sheet move right when the nails were tacked in to prevent movement 😂 0:46
@10MinuteWorkshop
Жыл бұрын
That’s why the CA is a good idea. 👍
@davidstorton910
Жыл бұрын
You really are a smarty pants
@10MinuteWorkshop
Жыл бұрын
😆
@haychiieii5606
Жыл бұрын
👍🏽👍🏽👍🏽👍🏽
@richardstevenson2727
Жыл бұрын
👊🫡
@pgb9607
Жыл бұрын
You have been striking out a lot lately and I was considering unsubscribing when I saw this video. I am glad to see you are back in your shop giving practical advice.
@10MinuteWorkshop
Жыл бұрын
Would love to hear what you consider to be ‘striking out’
@Dunc2222
Жыл бұрын
I, for one, have yet to see Peter "strike out", whatever that may mean. @@10MinuteWorkshop
Пікірлер: 146