I'm going to make a bass that references the sound of a double bass.
For this video, I made the bridge (piece) out of machined brass and maple.
I made an original piezo pickup and built it into the bridge.
The bass I used for the pickup test is the first one.
• Andy bass & guitar ori...
I've been getting feedback that my old piezo pickup sounded like an old double bass piezo, so I decided to use the latest? I made a pickup with the latest piezo element.
The previous pickup had howling and a rough high-pitched sound that I managed to suppress with a capacitor, but this piezo pickup has this sound without a capacitor and with a direct amplifier.
The capacitance of the piezo element, the low cutoff frequency range, and the impedance of the amplifier... it's hard to say.
I have learned a lot by talking to the manufacturer of the piezo pickup.
Thank you very much.
In order to give more distortion, I devised the structure of the pickup.
This is a secret. But it's not that complicated.
The video I'm being asked to make may not be like this, but what I'm looking for is work like this, so I'll try my best to enjoy it and step into the extreme.
I look forward to working with you.
#2 • I need to shrink doubl...
#3 • I want make double bas...
BGMProject2 (Shunnosuke Kaneko) "The Bar with Sherlock
/ syunnosukekaneko
/ @user-kh4ce5zx5m
Parts and tools used
Wera Kraftform diamond screwdriver
amzn.to/2ZVG6MB Number 2 of +.
amzn.to/3iVTl7u + number 1
TONE Power Grip Screwdriver Set PLPGD6
amzn.to/2Q5MrRr
VESSEL Precision Hex Drivers
Set, amzn.to/2O6hFoC
1.27(inch)amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal Polishing also Picard
amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ adachi_andy_koki
#make
#asmr
#andy_bass_and_guitar
Негізгі бет I need to shrink double bass! #1(Guitar Making ASMR)
No video
Пікірлер: 7