All parts in this video can be found in my Amazon Store! www.amazon.com/shop/modernmining If you have any questions, consider becoming a channel member to get acess to the Modern Mining Discord channel!
@GreaterGoodMining
23 күн бұрын
Great video brotha, and thanks for linking my vid in the description! It's fun to mod these things! Nice work! :)
@ModernMiningHub
23 күн бұрын
Couldn’t have done it without learning from yours!!
@jokerminer1
Ай бұрын
If you watch greater good video when he moved the fans on outside he was able to keep the cover on by doing two screws under and two on top for cover. Good video.
@RGD-Audio-Repairs
20 күн бұрын
wow the price of the KS0's has dropped drastically over the past few days! Picked up a bargain this evening on ebay... 2x KS0 ultra's, both overclocked with supporting mods... 3D printed air shrouds, fans etc etc... £300 with free shipping ($397 according to google conversion).... Super happy with that :)
@kevinkaye
Ай бұрын
Thanks for another thorough tutorial here. I'm still considering whether to overclock my KS0 Pros & Ultras, but you make good points.
@ModernMiningHub
Ай бұрын
@@kevinkaye apparently you can do the 560gh without even opening up and voiding the warranty. May want to look into that one Kevin!
@vonfranko
Ай бұрын
For the small fans, you can attach with 2 screws on the case and then 2 outside to attach the metal shroud. At least that's what I did. Just make sure they spin before running it.
@ModernMiningHub
Ай бұрын
@@vonfranko dang that is a great point!!
@Kevin_Kalonji
Ай бұрын
Great video!!!! I spent the extra money and picked up a few extra KS Ultra units did not want mess with opening devices. You made it look easy might get a server PSU and breakout board to save on power supplies. Are there breakout board cables to barrel connector that will not melt?
@ModernMiningHub
Ай бұрын
According to TSwift he is very against powering them with 12v power supplies. It increases the amps to the plug and can melt it much easier.
@whitestar1199
Ай бұрын
Interesting to see how high you can push those ultra’s. I have 3 AL0’s on order and planning to OC those straight away as the FW is available. Got my fans and shrouds. Waiting on the PSU’s got some 280w’s on order which should be with me by the time the FW is released hopefully. Need to get me some heat sinks and thermal paste.
@ModernMiningHub
Ай бұрын
Check my Amazon store in the description it’s got all the components. I just ordered an AL0 today hoping the overclocks come quickly!!
@ModernMiningHub
Ай бұрын
After a few days of tinkering I ended up going with the 618 GH version! I had to use the medium voltage setting to get the correct hashrate. Let me know if you guys have any questions!! *Parts Used:* www.amazon.com/shop/modernmining/list/2J3LBUR0M9AOK?ref_=aip_sf_list_spv_ofs_mixed_d Important Note: If you unplug or damage the stock ks0 ultra fans. The overclocks will not run and you will get a blinking red light. It will still mine on stock firmware but not the overclock fimware!
@LostJediJC
Ай бұрын
what wattage does the 618gb version give you? I'm at 720 ghs right now lol and i picked the 676 ghs file
@kt323
Ай бұрын
Upgraded fans not possible? 😢
@jkohutiak
22 күн бұрын
we got shat on with hash rate eh?? i just bought a few ks0U's still love them and will hodl longer i suppose
@RGD-Audio-Repairs
Ай бұрын
Been a while since i caught up with your videos dude... I kinda gave up with mining, when i was struggling to build my RTX 3060 rig, and then GPU mining kinda lost its way... But im back.... and im going for Asics now :)
@ModernMiningHub
Ай бұрын
Welcome back 🫡
@RGD-Audio-Repairs
Ай бұрын
@@ModernMiningHub Well, I never really planned on getting back into crypto tbh.. But i was gifted 2x Antminer L3++ Asics from a friend, Both in box.... Very very low hour usage on them both... (less than 100 hours on both).... They have the "L3+ virus" where you cant upgrade firmware, and it keeps changing the admin password back to ROOT, etc... But easy fix :)
@WooDeWow
Ай бұрын
Amazing video! Im say fuck it and order a KS0 Ultra! this is insane 600+ GH/s wow . hey from what i could understand Open KS0, take stock fans flip them outside of case, Get those copper heatsinks on the mosfits, wait 24 hours to dry, attatck shroud and high preformance fan, Use a 230w-240w power supply to power, flash firmware ? what did i miss , sorry for the million questions im new
@ModernMiningHub
Ай бұрын
@@WooDeWow you got it man that’s the main steps. No need to switch pads/ paste unless you have a very hot ambient environment
@Grace-d7z
Ай бұрын
I think KAS is very much in the future and KS0 Ultra is also substantial. I currently have 30 brand new machines on hand, do you want them, I can share them with you for a great price.
@HomeownerHacks
Ай бұрын
Can you still brick your KS0 if you do this?
@ModernMiningHub
Ай бұрын
Not on the newest version of the firmware!
@andrewjones198
Ай бұрын
Make sure cooling is good and probably no issue, my guess
@dallas11573
Ай бұрын
You have two power supplies listed on your amazon list- which one?
@ModernMiningHub
Ай бұрын
Cheaper one is fine
@domg6614
Ай бұрын
I let the glue dried when the ks0 was running in horizontal position for 2 days, don't want to lose time hashing hahaha
@ModernMiningHub
Ай бұрын
I was considering this lol but thought it may not dry if the chips were hot
@roberthall6010
Ай бұрын
Bugna🎉
@askjeroen
Ай бұрын
The faster RIO is only if you discard they whole power usage part of the miner. After the OC how much does the miner use? So nice tutorial on how to mod the miner, the oc part is biased/incomplete and should therefore be removed.
@ModernMiningHub
Ай бұрын
@@askjeroen faster roi assuming kaspa goes up in price. More yield means faster roi in that situation. Should’ve clarified that!
@frankz1999
6 күн бұрын
Anything on how much watt it uses on the 618gh medium voltage?
@ModernMiningHub
6 күн бұрын
With the fan included like 190ish
@piosky3397
Ай бұрын
👏
@jasonkidwell1767
Ай бұрын
Overclock till the chips pop that my motto.. run it and gun it
@ModernMiningHub
Ай бұрын
Hahaha might have to steal that from you!!
@wolverine1981pl
21 күн бұрын
cant ROI on Kaspa miners. profits going down too fast. hashrate going up too fast. then you can emisions reductions
@576turky
Ай бұрын
u said around 120$ is that for each of them or total ? then how much is the oc ? also idk why ibelink the only one that make me oc from their default firmware
@ModernMiningHub
Ай бұрын
$120 is basically the cost for modding both of them. The firmware is .5% fee!
@TheCryptoMiner
Ай бұрын
So now that you did that and got an increase.. that will soon be non existant because every one else will do it and the hashrate throughout the network will increase by that much.
@ModernMiningHub
Ай бұрын
@@TheCryptoMiner lol good point
@jiggajhood
Ай бұрын
You need KS1 or better now with all this hashrate and award halving this month
@ModernMiningHub
Ай бұрын
Certainly getting harder. Trying to stack as much yield as possible this month since I started mining kaspa so late!
@jiggajhood
Ай бұрын
@@ModernMiningHub the hashrate is out of control. The price need to skyrocket to keep it worth the energy cost
@TechnicalsMatt
Ай бұрын
Big thanks for the linkback to my shrouds. HMU for a fully enclosed one if you like, i'll email you
@ModernMiningHub
Ай бұрын
No problem you got the best deal around!
@gemrough
Ай бұрын
Fun fact, peeling the sticker off does not void your warranty (Magnuson-Moss Warranty Act)… but the mods did😂
@ModernMiningHub
Ай бұрын
@@gemrough I don’t think that applies to non US companies would it?
Пікірлер: 51