Man I cant wait to drop the cam in my baby. I wish these cars got more love and attention there's so much you can do to a F-Body. love the car man!
@walkerhaules
2 жыл бұрын
Thanks my guy! They are a ton of fun and look AMAZING
@chesspiece81
2 жыл бұрын
3 things, 1) I love 4th Gen T bodies so I love the build 2) please splurge on a tubular K member they're so much lighter and stiffer than stock plus you have so much room for activities finally and most importantly 3) you look pretty young but please listen to me. When using an impact or hammer wear some earplugs. I didn't when I was younger and I've been around loud fast cars, stereos that would do high 150s low 160s, guns, and impact tools. I'm 40 years old and my ears constantly ring. Please consider it.
@walkerhaules
2 жыл бұрын
Thanks for the comment! I will definitely be looking into the k member. Will have to add it this winter. I’m only 21 and never wear any ear protection but will admit i need too. I appreciate all the advise!
@chesspiece81
2 жыл бұрын
@@walkerhaules Look into a tubular K member, front and rear tubular control arms, torque arm, panhard bar, sub frame connectors, and either build an 8.8 or order a 9" with 3.73 or 3.90 gears if automatic and 4.11 or 4.30 if manual. I promise it's some of the best money you can spend on a 4th Gen. That with QA1 coilovers, some stage 2.5 5.3 heads, Fast intake, 1 7/8" long tube headers, 4k stall if auto or billet flywheel Spec Stage 3 clutch if 6 speed really makes for an awesome F body setup. I've had auto and M6 and I prefer the M6 most. Maybe I'll end up with another one soon.
@USArmyZ28
3 жыл бұрын
Nice ride, I had a black one years ago with a t. Rex cam. Easily the most regrettable decision I ever made in my life was to trade it in.
@tunnyscollective9963
3 жыл бұрын
Great video keep it up family
@LSX01Nation
2 жыл бұрын
Subscribed. Nice bird.
@walkerhaules
2 жыл бұрын
Appreciate it greatly!
@DarrenWS6
3 жыл бұрын
Very cool! I can't wait to head/cam my 2000. Nice ride my man.
@walkerhaules
3 жыл бұрын
Thank you! For sure worth the money🙌
@SpeedDemon88X
3 жыл бұрын
Real clean car man.
@walkerhaules
3 жыл бұрын
thanks homie🔥
@solidtenpin
3 жыл бұрын
Badass, just had the same cam put in my 2002 TA with some ported 243's.
@walkerhaules
3 жыл бұрын
HELL YEAH BROTHER🦅🔥
@bobbyjonson2944
2 жыл бұрын
Man it looks good and sounds good 👍
@charliehuntsman9827
Жыл бұрын
Badass car man have a 2001 Camaro SS with a Texas speed torque V2 cam ls7 springs and push rods BBK long tube headers full exhaust with y pipe and a built T-56 stage 2 build from Texas drivetrain performance with a stage 3 monster clutch. The one thing I need to do well a few things is a might mouse catch can and a quick performance 9 inch rear end. And some tlc on the body and interior but the damn thing runs like champ . Badass car man 🤘🔥🤘🔥🤘
@walkerhaules
Жыл бұрын
Sounds like a unit! Thanks brother!
@jeffclark5024
3 жыл бұрын
That’s bad ass! I just put this same cam in my LS1 Mercury grand marquis.. haha.
@walkerhaules
3 жыл бұрын
oh heck lol now that’s interesting😂 my style too
@jeffclark5024
3 жыл бұрын
@@walkerhaules It definitely turns some heads when people hear cammed LS1 sounds coming out of a BINGO cruiser! There’s a short video on my channel of it idling in the garage right after I got it running.
@walkerhaules
3 жыл бұрын
that is BADASS my man
@gjrt7573
2 жыл бұрын
I did my front and rear suspension at the bottom of my drive way. I used a floor jack to get it in. The K member is geometrically strong. the engine will flex the car by the shear power of the engine. not the k member. butting new motor will only mitigated it a little bit.
@Exquisitewrk
Жыл бұрын
One must be one with their 4th gen to drop a cradle and go all out..I’ve done it and the whole time was cursing GM engineers 😂😂 yeah isn’t too much fun it’s about 3x the work I feel for anyone attempting to do this without a lift..I couldn’t imagine..especially when aiming those guide pins and steering shaft. How long did you run the break in oil before you changed? 500miles? And did you end up throwing the 10w30w back in her? Thanks bro.
@walkerhaules
Жыл бұрын
It definitely makes it a lot easier with the lift! We’ve had this motor out 3x so i’m used to it now we got a good system down lol. I ran roughly 400 miles then changed it and i go roughly 2k miles on a oil change now. I still use 10W-30!
@pabbqmgv
3 жыл бұрын
Will be all worth it in the end
@walkerhaules
3 жыл бұрын
oh it’s for sure worth it!!
@CRUSHFACTORPC
3 жыл бұрын
I would imagine that initial startups on more popular channels fail as often on the more popular channels they just FAIL to include them in their "VIDEOS".
@felixreyes958
3 жыл бұрын
You rebuild the 5.7 or did you get a engine swap?
@walkerhaules
3 жыл бұрын
Rebuilt the 5.7 this is all im gonna do to this car so wasn’t worth swapping.
@MaximusFullAuto
6 ай бұрын
Definitely needs a tune
@marv9566
2 жыл бұрын
Got the the Same setup
@walkerhaules
2 жыл бұрын
That’s dope! How do you like it?
@ezeqkro
2 жыл бұрын
Should’ve went with speed engineering long tube headers, I’m running them and literally no clearance issues
@walkerhaules
2 жыл бұрын
I am running those lol as well as their full exhaust…..
@ezeqkro
2 жыл бұрын
@@walkerhaules damn all bad, wonder why you had clearance issues. I plan on getting their true dual exhaust as well
@walkerhaules
2 жыл бұрын
@@ezeqkro Their exhaust sounds amazing! I got their catless option.
@ezeqkro
2 жыл бұрын
@@walkerhaules just ordered their exhaust the true dual with quad tips, can’t wait to hear it with my cam
@walkerhaules
2 жыл бұрын
@@ezeqkro Go to my instagram @wrogier2366 you can get a listen what it will sound like!
@allykempf2873
3 жыл бұрын
WHAT’S UP guys
@pontiacmaniac7772
2 жыл бұрын
Doing it proper. It would be nice to have a shop like that and not have to do it in a driveway.
@walkerhaules
2 жыл бұрын
It saves so much time and effort with a lift. Life saver for sure
@JayFreezeBoston
Жыл бұрын
nice TA man!
@walkerhaules
Жыл бұрын
Thanks brother
@ssquaredcustomz8406
2 жыл бұрын
and it never ran the same
@walkerhaules
2 жыл бұрын
LMFAO😂🤣
@wkjeeping9053
Жыл бұрын
That's how you know you bought cheap ebay headers!!!!!!
@walkerhaules
Жыл бұрын
They are cheap but they are speed engineering for the money best header out there
@jasonmacneil2256
Жыл бұрын
Why not just purchase HEADERS THAT FIT???
@walkerhaules
Жыл бұрын
said they fit from website why send them back when i can make it work. Can’t be scared of a little work
@jasonmacneil2256
Жыл бұрын
@walkerhaules because, it should have fit. It'd be different if they gave you a break on price. But if you like to pay full price for parts that don't fit, we'll that speaks volumes.
@scottyscotty4558
3 жыл бұрын
Whats with the outbursts of utterly crap music randomly appearing
@walkerhaules
3 жыл бұрын
sorry it wasn’t up to your standard boomer🥺
@Guardian4ever
2 жыл бұрын
I agree the music sucks ...but playing it at 10x the volume of the talking is downright annoying...(nice car tho 😎 from a fellow ws6 owner)
Пікірлер: 59