really looking forward to the turbo busa swap after the explosion.
@_Gingium_
5 ай бұрын
😂
@eyedeekay143
5 ай бұрын
One of the first things i thought when i saw this car 😂
@IamBOBski
Ай бұрын
God no busa swaps are getting old there are other bikes to try js
@sethk1429
5 ай бұрын
One thing I love about this is the fact that honestly that 660cc will sip on the nitrous even at 50hp with that bottle.
@_Gingium_
5 ай бұрын
Yea exactly!
@ImInLoveWithBulla
5 ай бұрын
Actually, a nitrous setup is independent of engine size. A 50 shot is a 50 shot whether it’s on a kei car or a 700ci pro stock mountain motor.
@sethk1429
5 ай бұрын
@@ImInLoveWithBulla yeah my wording was not the best. I meant even at 50hp, which would be a huge amount for the engine, a 10lb bottle will last forever. Something like 4 minutes of continuous spray. Also mountain motors are “technically” 820 ci and higher. I only know this because the mountain motor guys made jokes to my uncle when he switched from a 632 tall deck to a 740 hemi head motor. They always used to say “you’re almost there”😂.
@SecwetGwiwer
5 ай бұрын
Day 3 of asking for a Honda Fireblade engine swap.
@SecwetGwiwer
5 ай бұрын
999 cc - 214 hp at 14,500rpm
@marcosamadop_1
5 ай бұрын
CBR1000RR engine coming right up
@_Gingium_
5 ай бұрын
Let’s see if the stock engine survives or not
@SecwetGwiwer
5 ай бұрын
@@_Gingium_I’m sure could handle a 200 shot 😉
@enjoymusic6365
5 ай бұрын
Ok but making the car actually fast will ultimately ruin it. What makes the car so fun is that it’s a challenge to drive fast. It’s small and light with not a lot of power and it means you have to learn and get really good at carrying the momentum of the car through corners. Putting a very powerful engine in the car will ruin that balance. A little more power won’t hurt it, but more than 100hp will ruin it’s balance.
@osmiumviii4193
5 ай бұрын
Nitrous purge giving NFSUG2 vibes 😎
@Wooden_Hammer
5 ай бұрын
The steering wheel mount for the buttons is 🔥
@TheMichal1260
5 ай бұрын
I just put turbocharger on my 40hp 900cc fiat cinquecento just because its funny. Im glad, that im not the only one whos making small slow cars a bit faster xD
@Sbinott0
5 ай бұрын
The old one?
@TheMichal1260
5 ай бұрын
@@Sbinott0 1994
@chappy1101
5 ай бұрын
the quality of the videos is crazy now. love the paint booth room with the lighting for the b role clips
@trentschlick3261
5 ай бұрын
Hey Caleb! Just wanna say thanks for making such entertaining content. Been watching for years now, seeing you grow and become more knowledgeable is inspiring!!
@_Gingium_
5 ай бұрын
Thank you so much!
@classicfordguy911
5 ай бұрын
You need a full throttle switch and bottle heater
@BrodeyDoverosx
5 ай бұрын
Yep. Get a haltech to control it, easy!
@KJMTurbo
5 ай бұрын
Key things with Nitrous, inspect your spark plugs often, don’t use below 4,000rpm.
@_Gingium_
5 ай бұрын
Thanks for the advice!
@Drunken_Hamster
5 ай бұрын
400m absolute? Or is that some kind of proportional thing? Cuz 4k doesn't give you much of a powerband on something like an LS if it's an absolute number.
@KJMTurbo
5 ай бұрын
@@Drunken_Hamster It’s proportional but even so the later you use it the safer it is, depends on how big of a shot and the amount of air drawn into the cylinders. If you have a very aggressive cam at low RPM where you have valve overlap and low vacuum it can destroy inlets or worse.
@KJMTurbo
5 ай бұрын
You can KZitem nitrous backfire compilation, I’m sure that’s got to be a thing 😂
@x-tasi
5 ай бұрын
My god the bots are going crazy on this one
@Blurgamer17
5 ай бұрын
Some generic 🍑-bot: "[Insert some suggestive question here]," 😂
@_Gingium_
5 ай бұрын
I don’t understand how KZitem hasn’t fixed them yet 🤦♂️
@redsquirrelftw
5 ай бұрын
Twitter has been purging bots, maybe they're sending them all here lol.
@vehiclespotter7431
5 ай бұрын
In before he blows it up chasing 100whp
@notsofast1334
5 ай бұрын
The Supercharged Motor from an H2 Would be insane in this little Car!
@feverdream2661
5 ай бұрын
So proud of you Caleb. I am a long time subscriber and what you have built in such a short time is crazy. You have a multi room garage, CNC machine, paint booth, lifts, etc etc and now a dyno!!! Dream set up for any car guy. Keep killin the game
@nathans5773
5 ай бұрын
Cheap parts disappoint. Where have I heard that story before?
@Ady_Mih
5 ай бұрын
this is just insane
@_Gingium_
5 ай бұрын
😁
@steammartian7705
5 ай бұрын
Dude. That thing is cool as hell. U don’t need fast. That thing is cool enough to turn some heads
@chickenheart3612
5 ай бұрын
Please do mind this comment reminding Gingium about all the past comments written by experts about his sub-par installation of the lifts. This video was probably recorded and finished way before the last few videos where people in the comments have raised awareness about the lift situation, but I feel obligated to bring it up again. Safety is Paramount and it's worth every single penny. He doesn't seem to have replied or read the actual professionals that raised concerns yet.
@yota1092
5 ай бұрын
Stop spamming this comment on each vidéo hé already replied under one or your comment
@chickenheart3612
5 ай бұрын
@@yota1092 he has not replied to the actual concerns under the shop renovation video. His reply was just "it'll be fine" and did not answer any of the concerns they raised. We're gonna keep bringing this up until it's properly addressed.
@Hard_Right
5 ай бұрын
@@chickenheart3612all his shit are barely even cars , they don't weigh enough to matter
@chickenheart3612
5 ай бұрын
@@Hard_Right you think engineers make safety regulations for fun? Do you think they only apply to edge cases? That we don't bother with setting outlines to make things safe in **every** situation?
@fakename287
5 ай бұрын
@@chickenheart3612 yes, because at the end of the day it's not the engineers making the final decision, it's the lawyers and accountants, obviously they're going to overcompensate to cover the corporation's ass
@lcq4blackstar
5 ай бұрын
Man... you killed it with the exhaust, the motor sounds so good! You are into the nitrous for a G... The move would have been a used C-15 series Rotrex A/W or non-intercooled with simple PWM boost reference on the stock fuel system/ECU... IMO would have suited the engine perfectly! Probably could have been done for $1500-1700. On my GD3 with the low boost kraftwerks kit same as above setup (non-intercooled) it was good for 30WHP on the dyno and dead reliable. (C15-60 Rotrex W/restrictor to 5PSI)
@Fugoczi
5 ай бұрын
we need a hayabusa swap on this car. Would fit, sounds great, more power would a be a sick project, Busas are not that expensive
@RearEngineShop
5 ай бұрын
It’s fun watching a slow car become slowish! 🤘
@ProfessorLX
5 ай бұрын
Nitrous purge is so you can set the bottle pressure before using the nitrous. If you have 1200 psi of bottle pressure when you are tuned for 1000 psi you are going to have a bad time.
@chrismichaelyoung
5 ай бұрын
I think it's great you're trying new stuff. Motorcycle exhaust and nitrous goes crazy on the Beat
@honda4185
4 ай бұрын
Should do a detail to the engine bay so it looks as good as the car! 👊
@SKOMPAS
5 ай бұрын
Nitrous purge is cool and 100% made up by big Nitrous trying to sell you more!
@thusmarshal8815
5 ай бұрын
The exhaust sounds phenomenal. It's like half a Subaru or a Porsche flat 6 that sings
@brentboyd4906
5 ай бұрын
My favorite add on was the power switch in the ash trey, so clean. I did the same for my z4 but with electronic exhaust opener.
@ollybrowningg
5 ай бұрын
this has to be a worlds first
@outdoorchristianboy
5 ай бұрын
Wish you would’ve covered the knock system some. Curious about it.
@DirtyNastySi
5 ай бұрын
I started watching your videos at the very start of the drift truck and youve helped me realize my passion for creating and fabricating things and Im currently in school for production welding. I wanna be just like you Gingi
@eliveltonbecker
5 ай бұрын
Youre the beast Saitama hoooooooly
@user-zl8jd1rf4g
5 ай бұрын
Good to see you rust-proof the newly drilled holes.
@erocker78
5 ай бұрын
I had that same nitrous kit on my 2001 civic back in the day. Had a ton of fun with it but it blew the head gasket.
@IAM2CAN
5 ай бұрын
Ngl this beat sounds like much fun, i like the sound too.
@u.e.u.e.
4 ай бұрын
I'd prefer one thing: If you could twist the exhaust-end from perpendicular to the left wheel to a real exhaust to the back! 😉
@Garrett-tm3to
5 ай бұрын
Damn you Caleb now I wanna put nitrous on my single cam accord.
@ifeelcoke4347
5 ай бұрын
There’s a company called JFC racing which manufactures a 2.8 L v8 using two Hayabusa engine blocks that produces 780+ HP. This is the type of car I’d see having one of these hahahaha
@802Garage
5 ай бұрын
I'M SO EXCITED FOR DYNGIUM! Dynium? Gingyno? YOU GET THE POINT!
@alezisaa
5 ай бұрын
Sounds really good
@caseymoore303
5 ай бұрын
This has been a fun series, excited to see where it goes. My 3 cyl love started with my 1999 speed triple. Have since owned a 1999 Daytona, '13 speed triple, 16 tiger 800. Also a couple singles, parallel twin, V twin, I4, crossplane I4. On motorcycles, I find 3 cyl as the right balance of rawness/power delivery/refinement. Singles and twins weren't as smooth, 4 cyls a bit sterile and sometimes even buzzier. At one point, I was very close to nitrous on the speed triple but never did it. Now I can live that dream vicariously. I've been quite tempted to get a cappucino though....
@Drunken_Hamster
5 ай бұрын
Triples and crossplane twins are the goat. I'd love to see and hear an even-firing 5-cyl, though.
@justinhopton999
5 ай бұрын
Takes me back to Need For Speed Underground Days
@ninjaboi636
5 ай бұрын
“He’s got enough nos in there to blow himself up” - Ja Rule
@ryandoyle4344
5 ай бұрын
Nitrous is Fun!! It may be easier to use with the button on the shifter. Although, my kit had a micro- switch setup for full throttle on the TB. Shifting, steering, throttle and a button will keep you busy. IMO, micro-switch.
@Cobra_427
5 ай бұрын
You made me want to get a Miata years ago, and now you're selling me on a Beat, looks like I will be having a full garage of my own at some point
@markpegler3277
5 ай бұрын
This car is crazy cool . Love your content more than ever keep being true to the builds you love
@sfisosg7904
5 ай бұрын
Sometimes thats all u need a couple friends and meeting up with their cars 😌👌🏾
@perspeci
5 ай бұрын
Great to see you used the paint booth 😀
@CorneMaritz
5 ай бұрын
I am so gutted I only saw this video now! Man, teenage Gingium must be so proud 😂 *insert need for speed underground 2 intro song*
@coreyjohnson993
5 ай бұрын
Keep doing stuff that makes you happy.
@matriix18
5 ай бұрын
You should get an R1 motor to put in there
@Dan12gt
5 ай бұрын
Do any of you remembered when Gingium used to do Forza Drag videos 🤣 only the OG ones would remember
@redsquirrelftw
5 ай бұрын
Woah I thought you were kidding about getting a dyno, those are crazy expensive last I heard. That's awesome.
@jesse9638
5 ай бұрын
Have I ever wondered what would happen? I’d venture a guess you’d get an incredible hole in a piston. lol
@rodekil1906
5 ай бұрын
crazy man i’ve been watching you from the horizon days back in high school. keep up the good work man love the content
@g.simard854
5 ай бұрын
do Teflon tape and loctite over it for best of both worlds, industrial technique 😉
@VelocityisTaken
5 ай бұрын
Just saw your ad on marketplace, why are you selling this thing? It's awesome!! I know you probably got a plan for something much cooler. Can't wait to see what you have in store!!
@harleym.4903
5 ай бұрын
Genuinely dont know why this channel doesn't do better, the quality, consistency and content is all there, keep up the amazing work gingium. Genuinely in the top 3 car channels for me next to Puddins fab shop and Toms Refurb. Promise me you'll bara swap a sn95 mustang (not new edge those are gross, melted cheese looks better) or make a mid engine 1st gen prelude, oooor maybe a mid engine ford probe with a Yamaha ford v8 out of the melted cheese SHO Taurus. Just some idears from the thinkin man.
@delavarzarnegar8170
5 ай бұрын
You just dropped the top 3!
@teemoL
5 ай бұрын
Please put a lexan panel to show the bottle. Honda things 😂
@josephbaker2692
5 ай бұрын
Dang your landlord has a nice 4Runner it looks like
@MemelordJord
5 ай бұрын
Gingium
@CalebBoender
5 ай бұрын
Sausage
@FORDLYFAOTEAROA
5 ай бұрын
Ginge coming in solid with the weird projects,whats new 🤣 but for real,making odd car content interesting 👌🏽
@colejohnson5447
5 ай бұрын
The bottle takes up the whole trunk 😂
@balintszanto8816
5 ай бұрын
Hey i just want to say that i love your stuff. I have been wathing you for a couple of years now and i hope you will make videos for us for a long time. Also i would like to add to all the people that say to put an inline 4 motorcycle engine in it, i think a 3 cylinder bike engine would suit it better like an mt-09's engine since one of the few perks of this car is that is a 3 cylinder like the mt-09
@eliasmachalek4856
5 ай бұрын
You gotta watch out man, Caleb is running 3 honda cylinders with a 100 shot of NoS
@dirty2jz283
5 ай бұрын
I thought registering a Kei Car was illegal in Georgia, part of the states that are banning Kei cars. Wait I just re-read it, its for Kei Trucks. Carry on.
@LongerRider
5 ай бұрын
600cc motor + 2000cc of nos= whoa
@unkownfather498
5 ай бұрын
Put a big ol garrett turbo in it
@MyBridgestone24
5 ай бұрын
+1 for Aprilia Tuono 1100 swap. 175hp of heargasmic fun.
@kagamiox6972
5 ай бұрын
When the engine goes (and we know it will) would love to see you swap with a inline 4 v-tech engine or even keep it 3 cylinder with a gr Corolla engine
@dorkvis5008
5 ай бұрын
Love it 👍 also with the meets, plan it a week in advance or longer
@91ludesit
5 ай бұрын
Those wheels are so dope.
@ipoopmuffins
5 ай бұрын
"a nitrous car without a purge system, is no nitrous car at all" -Confucious
@makeitorleaveit1
5 ай бұрын
A hard top would look sick on this 🙌
@HunterLexus
5 ай бұрын
I’m getting my Suzuki cappuccino in probably like June and putting an aftermarket ecu is like priority 1 after cleaning it up.
@andrewstamant5877
5 ай бұрын
Remember what happened last time we put something explosive next to the battery in an area that can get hit in a wreck😅😅
@Thecasualgamer-pp5wc
5 ай бұрын
All your missing parts and dissapointments is why you buy from Nitrous Outlet!! We sell kits with Every part you need for your car! We aren't like other companies who just throw you the parts and have you figure out how it works, we have our parts built in house ready to install in simple kits!
@markpease9575
5 ай бұрын
Kits for ford focus non turbo.
@mrblubot987
5 ай бұрын
Hope to see this thing at the pizza factory some day! 🤙🏾🤙🏾 Sucks to see no one showed up😭 most of the time when I go it’s empty as well🥲
@itsreaper1644
5 ай бұрын
Right next to the battery. Truely this is a man of safety.
@_Gingium_
5 ай бұрын
Yeah, probably should’ve put it in the passenger compartment instead.
@TheJraze18
5 ай бұрын
Difficult, but you always get it ✔️ 👍 done🎉
@zerodqkov341
5 ай бұрын
Bro got a dyno 😮
@PaddyBoy644
5 ай бұрын
Where’s Jackstand Jimmy when to need him?😂
@AimlessMoto
5 ай бұрын
Really interested in that knock system... where'd you get it?
@IMR_Seb
5 ай бұрын
Hey Gingium, completely off topic from this video but its the most recent so im giving it a shot. Watched your project miata subaru swap episodes, the drift truck, and been watching the first couple episodes of Project Binky from BOM and theres still one thing Im not understanding: How do you determine the height of the subframe jig in the new chassis? I understand how to make the jig, I get the other planes of alignment, I just don't get how you determine the height of it relative to the frame rails. Edit: i'm probably fuggin stupid and missed it but im struggling here.
@user-zl8jd1rf4g
5 ай бұрын
Would love to see a collab with gingium MCM and AutoAlex
@ashc3765
4 ай бұрын
The nos bottle is bigger than the motor!
@UKfromadrone
5 ай бұрын
knowing how gears and gasoline's kei cars ended up without nitrous, what kind of engine swap do you plan to do?
@_Gingium_
5 ай бұрын
😂
@epp9122
5 ай бұрын
Dyno nice! But how are you going to get the exhaust fumes out?
@taylortankersley6325
5 ай бұрын
Aaand empty bottle before he gets it on the dyno 😂
@nickcook7408
5 ай бұрын
It needs a 13b
@RyneDickens
5 ай бұрын
I just love this build haha!
@PistonsProps
5 ай бұрын
Maybe we’ll see it at caffeine and octane one weekend.
@MrDudestein
5 ай бұрын
glad that you didn't go turbo, let that tiny engine sing!
@LongerRider
5 ай бұрын
Dude super charger it do it switch to ethanol. Added water alcohol system. Pray.
@misath113
5 ай бұрын
Can somebody explain this: From 13:07 the nos switch is not connected to the wire. Its unplugged. Only the purge switch is connected
@Jeeplee_rc
5 ай бұрын
Sick! Hooe the motor likes it!
@givenlife706
5 ай бұрын
The kit you got was for somebody that had everything already installed and they just need a bottle and stuff that's what you bought
@sparkiegarage8083
5 ай бұрын
I would’ve pulled up to the meet
@nidiahk
5 ай бұрын
200hp or bust, then turbo busa :D
@Bryce7O3
5 ай бұрын
When u dropping the top and letting the wind caress ur head
@jackoverholser8399
5 ай бұрын
I wish I could pin your channel to show up at the top of my feed every time you post
Пікірлер: 259