1) I spotted a great idea from Turkish women for the summer: a skirt-pants. Sewing couldn't be easier. No measurements needed, done in an hour.
The official name of this item is “culottes”.
For sewing, a soft draping material with a width of 1.50 m is well suited.
I chose an easy-to-use model for myself; you can do it in an hour. For sewing you need a square piece of fabric 1.50x1.50. This model will fit up to size 54.
If you have a larger size, you can sew it the same way, but make small changes. Lower the waist line, due to this the length of the product will become shorter. This can be corrected by sewing wide lace underneath or using more fabric.
How to sew:
- Fold the cut diagonally. The pattern is made directly on the fabric according to the diagram. Set aside 8 and 10 cm from the corner on the right and left and draw lines down. From the intersection point, set aside two times 30 cm, then see the diagram.
- Sew the parts with rounded corners, overcast.
- On the side where 8 cm you need to cut off the fabric a little, to the width of two fingers or 2-3 cm.
This part is the front and it will be slightly lower than the back.
- Now unfold the skirt, aligning the seams. The open sections will be between the legs; they will also be stitched together and overcast. Turn the product inside out, and here is the culotte in all its glory.
- For the belt, cut out a strip 9 cm wide, stitch it into a circle and fold it in half. Sew to the waist. Thread a wide elastic band inside.
- You can sew two belts on the sides and tie them in front with a bow.
- All that remains is to process the bottom of the wide legs. I folded the fabric 1 cm and stitched with a frequent zigzag. I cut off the excess.
When you put this thing on, you can hardly tell that these are wide trousers. The fabric falls in waves and looks like a flared skirt.
2) I sewed unusual and original trousers with drapery. Definitely no one has anything like this.
At first glance, everything seems very complicated, but in fact, such a thing is very simple to sew.
- For work you need a thin, flowing fabric. It can be chiffon, satin, viscose, I took silk, 1.50 m wide. The price of such fabric is 360 rubles per meter. You will need 2.20 m.
- For cutting, you need to cut out two pieces of fabric, measuring 110x110 cm. Here is the pattern.
How to sew?
- Roll these two pieces diagonally. Transfer all dimensions from the pattern onto the fabric and cut out.
- Where 19 cm is, this is the bottom of the trouser legs.
- Sew along the 5 cm mark, this is the top side point of the trousers.
- Make folds on both sides of this place, they should look towards the middle. I made them using a fork, it is placed with the teeth down, the fabric is threaded as in the photo, and the fork is turned over with the material towards the foot.
- It turns out to be a soft drapery, this is a belt.
- Connect these two parts with the right sides facing inward, stitch and overcast the middle sections.
- Unfold the trousers and process the step cut. At this stage it is clear that these are trousers.
- For the belt, you need to cut a strip of fabric (mine is 110 cm long), so wide that you can put a wide elastic band there (mine is 4 cm wide). Connect it in a circle and sew it to the trousers. Thread the elastic band.
- Sew and hem the bottom of the trouser legs.
The trousers are suitable for any size. My size is 50-52, it turned out to be 11 folds on both sides, if the size is larger, then make fewer folds.
The trousers turned out to be unusual, festive, and very comfortable. The drapery does not need to be adjusted; it easily fits into the waves. Surely no one will have anything like this.
Негізгі бет I saw these chic skirts and trousers on Turkish women. No measurements needed, very easy to sew
No video
Пікірлер: 15