YAY, Nick! Best pandemic content gift ever; nice to see two old buddies get to hang during all of this.
@venividivici4253
4 жыл бұрын
Pretty sure they got corona now. Just kidding
@goodmanale
4 жыл бұрын
@@venividivici4253 Hey as long as they are just knocking back some corona and not contracting corona, I'm all for it!
@perryinsanfrancisco
4 жыл бұрын
@@goodmanale Dude, they still selling that thing?
@goodmanale
4 жыл бұрын
@@perryinsanfrancisco lol I assume you mean selling quarantine content? No not at all, I just consider it that personally since I've pretty much been confined to my own house/garage for the past few months (besides the office). It's nice to watch fresh content.
@jamesbarlett246
4 жыл бұрын
This will be a half mill car by the time it's done lol!
@heldermoroso2843
4 жыл бұрын
It's great seeing Nick again collaborating with Jay on video
@combatwombat594
4 жыл бұрын
3:54 Mrs Jay looking very entertained back there lmao
@thef1sh17
4 жыл бұрын
ALWAYS buy from Summit racing when you like a product but don't like their service. Summit will eat the costs to make you happy and leverage their buying power against the manufacture on their own time to get shit right. How do I know, I worked there.
@Jayztwocents
4 жыл бұрын
This was from Summit
@artyboy92
4 жыл бұрын
@@Jayztwocents That's interesting, I would have thought Summit customer support would have been all over Hotchkis for you. I'm very curious to see how this plays out and I hope you get your money back for the mismatched kit.
@MikeHarris1984
4 жыл бұрын
Yup, Summit is amazing. They CARE about their customers! Anything like this, I only order from Summit. I wish they had brick and mortar stores in cities where people actually live (Like Phoenix)... I could get lost there, that is my candy store.
@thef1sh17
4 жыл бұрын
@@Jayztwocents did you call them to handle the issues or hotchkiss? I know you would think a company would handle their own issues but most of them honestly have no intention of providing support to the public. they want to deal with resellers only. Seems that way with a lot of engineering companies. make great products but suck at the human side.
@ghomerhust
4 жыл бұрын
agreed. going through big time suppliers like that is often worth a little mark-up on the price of the parts because you know you have the backing of a big company that actually gives a hoot about its customers. my folks have been going with summit for many years because of that
@Anthonym_323
4 жыл бұрын
I dont know anything about cars, But i still enjoy watching thid vids and not understanding anything lol
@Sean_Lightning_OBrien
4 жыл бұрын
lol same I like cars but not enough to try build/fix one myself xD
@JakeBaconDigital
4 жыл бұрын
Lol sameeeeee... I also like cars but I basically know nothing about them and never know what they're talking about in these videos but still love em lol
@jameslewis2635
4 жыл бұрын
Yeah, I just watch for moments like when Jay decides his face needs some hammer time.
@urbantuckerman
4 жыл бұрын
I know a lot about cars, and I end up shouting "not like that!" and "no, the other way" a lot, but i really really enjoy these videos. I also build pcs obvs, but Jayz is a hell of a lot better at that. Maybe that's why I enjoy seeing him hurt himself fixing cars!!!!!! :)
@michaelcarson8375
4 жыл бұрын
Go watch Scotty kilmer he's funny plus he explains things in a nice way. The best part he will tell you want cars to stay away from and why.
@unicorn7337
4 жыл бұрын
It's 5AM in the UK and I'm watching this over my first coffee of the day. ☕
@derpulonk4951
4 жыл бұрын
A fellow lad i see, 5:06 here
@thegreathamass9073
4 жыл бұрын
5 is usually when I go to sleep.
@C0D3__BR3AK3R__Studios
4 жыл бұрын
"so apparently I can jump the car..." -famous last words Jay, June 2020
@luisfromthe803gaming6
4 жыл бұрын
at 5:30 i literally thought about that song💀im so glad you didnt miss the opportunity
@dumbdumb572
4 жыл бұрын
as someone who is also rebuilding a car at them moment ('69 el Camino) I genuinely find so much enjoyment out of this series. Keep up the good shit Jay.
@millerbrad1991
4 жыл бұрын
That eye roll @ 3:54. LOL!
@ChodeTheToad
4 жыл бұрын
Lol Mrs. Jay @3:54. Gotta let the boys be boys
@ColorofFaint
4 жыл бұрын
Man it's great to see NIck again, and hear that great chuckle.
@BlueprintPC
4 жыл бұрын
They are Autozone Jack stands lol. Anyways Jay I'm a "retired" ASE master tech. if you ever need a possible wrong answer or advise hit me up lol. I have a "fair bit" of knowledge. Outside of that I love seeing a tech tuber into cars. You inspired me to start my own channel after injury stopped me from being a tech. Good luck and please be safe!
@TheKeyBoardJockey
4 жыл бұрын
Echoing everyone else, I am so glad you and Nick are still doing the things together!
@joshhayes3433
4 жыл бұрын
I know these videos don’t get the exposure or views that the other channel gets, but I really enjoy the videos and I’m thrilled to not be the only computer nerd who’s also a car guy. Hope you keep these going, thanks for putting the time and effort into making them.
@pking6021
4 жыл бұрын
Congrats on the growth Jay! This channel had 43k subs when I first realized you had a car channel.
@Panhead49EL
4 жыл бұрын
It's fun watching a creator venture outside his area of expertise and into a topic that you know a lot about. Not hacking on Jay, I think it's great he's out there doing it. It's just funny hearing him confidently explain car tech to a computer tech audience.
@TheKeyBoardJockey
4 жыл бұрын
Also, your choice of EFI and also an LS7 is perfect. Well done. Can't wait to see the progress!
@cameronbstag
4 жыл бұрын
Jay, loving the Camaro content. As far as spring compressors go, they do make a style of coil spring compressor that should fit your Camaro. I had an old S10 with a similar front suspension setup, and a tool like the OEMTOOLS 27035 worked great for compressing the spring. I've done it once like you did in the video, and still had the spring jolt out on me. The tool is definitely worth the $50 or so.
@jamesbarlett246
4 жыл бұрын
I clicked like as soon as Nic appeared! These two are a dynamic duo!
@MrHaggibear
4 жыл бұрын
You definitely won't regret going with the Holley EFI. Not talking from personal experience, but seeing it on Roadkill and some other Motortrend shows made it look incredibly appealing :)
@exor1238
4 жыл бұрын
First time I have ever watched a video which has been uploaded for about an hour without any dislike. The reason for this might be because 1. the car is so cool, you can't hate it. 2. Jay makes every video so enjoyable and funny that you can't hate it xD
@SpoopyGamer
4 жыл бұрын
ah man, i missed Nick so much , glad to see you back m8
@normangeorge2376
4 жыл бұрын
Jay I stopped at timestamp 14:39. You can compress those springs however its a specialty tool and is expensive. essentially its a three pieces of metal, two plates and a all thread. You slide two of the pieces between the coils and then thread the all thread rod through. I had to find some from Amazon and it cost me around 200 dollars at the time.
@normangeorge2376
4 жыл бұрын
OTC 4.5 out of 5 stars 127Reviews OTC 7045B Front Coil Spring Compressor This is what I had to purchase when dealing with springs like these
@normangeorge2376
4 жыл бұрын
@ JayzTwoCents not vary savy in this media thus why i apologize for tagging you so late vuce in the first post
@VanishingImage
4 жыл бұрын
So glad to see Nick back! Miss your and his shenanigans
@Karthig1987
4 жыл бұрын
Damn jay knows so much about tech and cars. Maybe someday i will be knowledgeable about one of these things. No idea what he's saying about car stuff but i just enjoy worklogs/ things being out together lol.
@dilloncribbins4291
4 жыл бұрын
Hey Jay! I used to be a mechanic at Peterbilt and whenever I had to removed tierods I would hit the "meety" part or wher the tierod attaches with a sledge on the side. If you hit the threaded part on the top you can actually mushroom that bolt part and get it more stuck. Hitting the side will slowly break it loose. Love the videos!
@Jayztwocents
4 жыл бұрын
What this video doesnt show was the 15 minutes of hitting it without luck. I ended up just using my tie rod remover
@soundfluxsoundflux8603
4 жыл бұрын
I think you will enjoy the holley Efi system. the only thing to be careful with is the in tank pump. The terminal ends on the pump can touch the tank if you don't install right. I like the fact that i can control my Holley Sniper with the on board controller or my laptop.
@swordtraining
4 жыл бұрын
Great log video of the rebuild. This is beginning to be a great series. Thanks for this Jay!
@sldsnk3
4 жыл бұрын
I'm super happy you're going EFI.
@stoef
4 жыл бұрын
Installing a new suspension? SHOCKINGLY difficult
@scott2100
4 жыл бұрын
ah, the mortal coil
@philliplevine9167
4 жыл бұрын
Jay not saying the shocks were shocking expensive really disappoints me
@SemtexWarrior
4 жыл бұрын
3:52 The missus looks like she's not happy to be in the garage while Jay is doing "car stuff". Very much the same as when they drag us guys to the mall etc to shop for fashionable "clothes stuff" :D
@jompazx1272
3 жыл бұрын
putting a bigger swaybar in the front and not putting one in the back or putting stiffer springs in the bak will make it understeer more since you make the front wheels absorbe more of the sideloading, this is why you can adjust the over/understeer balance of the car using adjustable swaybars.
@DavidsonMott
4 жыл бұрын
For the shocks, I'd look into Bilstiens. Probably some of the best riding shocks out there.
@literally_not_kevin
4 жыл бұрын
Would you look at that a wild coconutmnky has appeared!
@Lord.Chadsworth
4 жыл бұрын
careful..... you don't want your statue pulled down.
@scarmenl
4 жыл бұрын
Good to see you again Nick.
@dragonhed123
4 жыл бұрын
This is my first video on this channel completely enjoyed it. Keep on keeping on. Also heck yeah Nick's back!!
@AZM3DIA
4 жыл бұрын
my dad had a 70 SS Chevelle LS6 454 we rebuilt when I was in highschool. Love old muscle cars even though I'm a euro guy now.
@Lenticular67
4 жыл бұрын
For me it was a '69 (nice) Roadrunner with the 383.
@yoshuaposhua25
4 жыл бұрын
My dads got a 72 Ford f100 with a 460 big block
@toastedjelly6310
4 жыл бұрын
If you had uploaded this 55 minutes ago Jay... It would've been the best birthday gift ever :(. Great vid tho :D
@lsxbird7874
4 жыл бұрын
Your going to like that holley efi settup much better! Carb is outdated, and limits what you can do on fine tuning. With the holley efi, you can have a track car that performs, while also not sacrificing streetability for long trips and daily driving
@Xtremepower21
4 жыл бұрын
Great to see Nick again back on the channel :D
@hellcat1988
4 жыл бұрын
Jay. Wow. Jay... When you're taking a ball joint loose, ESPECIALLY tie rod ends, you hit the cast steel where the ball joint shaft goes through. That will break the friction bond between the two without damaging the threads or the dust boot. You can even see the spot ON THE CASTING OF THE SPINDLE where you're supposed to hit.
@Jayztwocents
4 жыл бұрын
Dont think just because you saw a 3 second clip that you know the whole story. I hit every single spot of the cast body of that tie rod end for nearly a half hour. Damn thing wasnt coming off. Which is why I used the Tie Rod End puller (which Phil for some reason edited out... he always seems to cut out something important lol) and the next clip made it look like I was using the picklefork... bad editing made it look incorrect.
@hellcat1988
4 жыл бұрын
@@Jayztwocents I've had my fair share of fights with pitman arms not wanting to come free of a steering box, but I've never had a ball joint shaft not come free of a knuckle. Then again, I do use a 3 lb maul to do it.
@gclar014
4 жыл бұрын
Yay Nick is back!
@choocharoo
4 жыл бұрын
Jay you should do a follow up on the biking and weight loss. I think it would be a great video and you could help many folks. Maybe diet advice too. Great job keeping the weight off.
@cgcanada88
4 жыл бұрын
5.28 That beat drop on the suspension squeak... Epic.
@chbrules
4 жыл бұрын
I hope you'll come out to Autoclub in Fontana in August with Speed Ventures. I'm going to be testing my new C5 Z06 race build out there that day. Would be cool to meet you and check out your ride. Chevy bros!
@Jayztwocents
4 жыл бұрын
I dont track my cars in the summer heat. Times are slow, fatigue and stress on the car is high.
@cardsfanbj
4 жыл бұрын
I've got two pairs of the Harbor Freight jack stands... Taking them in for the recall tomorrow. Yay for spending more money on different ones...
@markb2860
3 жыл бұрын
To get the tie rod off, just hit the casting hard with a big hammer fast and easy. Saves the tierod vs the pickle fork if you need to reuse it too
@Keatononame13
4 жыл бұрын
Might have a headache of a time tossing in a new subframe considering the wreck. Something to keep in mind before you realize shit's fucked. Righteous build, stay healthy, keep it up.
@zaboss.
4 жыл бұрын
Great to see nick again ♥
@lonewolfsstuck
4 жыл бұрын
last time i did ball joints on my car i put the castle nut on and the new coder pins in. about 8 hours later one castle nut (somehow i managed to find it) came off while (LUCKLY) pulling into my driveway not on the highway. turns out the coder pins that came in the balljoint kit were def smaller than factory ones but they sheared off. got thicker coder pins from a tractor surplus store down the road that was almost 2x as thick. never had an issue since. glad i was in my own driveway and didnt have it fall apart down the highway that i just drove down.
@jacmifishe
4 жыл бұрын
Interference on the upper CA appears to be just on the zerk fitting. Should be able to remove it and cover the holes so you don't damage your fitting or threads.
@Pr34ch
4 жыл бұрын
yay nick is back
@danielking6507
4 жыл бұрын
Been wanting to do a Holley EFI conversation on my C10! Can’t wait to see your videos about it.
@solocamo3654
4 жыл бұрын
QA1 - can't recommend them enough. Can't speak for your platform though. Glad you are going EFI as well. Carbs are great, but long term EFI makes all the difference. Especially since I know the goal is more of a reliable cruiser that can be taken out to the strip/course.
@Jayztwocents
4 жыл бұрын
QA1 makes complete suspensions for my car. For now this is the path Ive chosen. That may change in the future.
@7sins979
4 жыл бұрын
had to pause the vid to drop a tip. when you are trying to get ball joints loose hit the part the taper goes into with a heavy hammer and they will pop off and not destroy the boot or the threads.
@althaf_iam
4 жыл бұрын
Yes Nick is back
@freefall5x
4 жыл бұрын
I put QA1 coilovers on my '68 camaro. They work good with the Hotchkis control arms and drop spindle.
@christhorney
4 жыл бұрын
when you hammer on the tie rod ends, put the castle nut on upside down and screw it on til its level with the bolt part so when you hammer on it you dont wreck the threads or the castle parts of the bolt, you can wham on it much harder .. i find the ball joint splitters can wreck the rubber boots when their not new like yours were
@Jayztwocents
4 жыл бұрын
I used a tie rod remover tool to get it off. Phil just edited this in such a way that made it look like I used the picklefork on it, which I didnt.
@christhorney
4 жыл бұрын
@@Jayztwocents ah ok, i just seen you whacking it without a bolt on top of it, i have damaged many tierod ends that way over the years i just thought you would like to know the upside down bolt thing that made my life easier, espesually on 4x4 suspention that can be alot more heavy duty, i have broken tie rod end removal tools, now i dont even bother with any of that, just put the bolt on upside down and wham it off lol, no more wrecked threads and no more split rubber boots
@dinkmeeker4241
4 жыл бұрын
You can get spring compressors in and it is safer (says a guy who has owned a 67 for 30 years). Had you been doing maintenance with a newer spring you would have had a much bigger jump when the ball joint separated. I am curious to see if you are going to start having collector meets ground issues with the two inch drop kit.
@Jayztwocents
4 жыл бұрын
I just showed in this video the ride height changed only .5" from the tired spring height... so why would I suddenly have ground clearance issues?
@p1mack
4 жыл бұрын
Thumbs up on seeing Nick!!
@petioborisow150
4 жыл бұрын
Some amazing people doing amazing things on DA car. Seems complicated. Here to learn a thing or two.
@UnfocusedRacing
4 жыл бұрын
I have to remove the rear springs in my Focus similar to how yours came out. Jack under the rear control arm and remove the bolt. Then slowly lower the jack taking the pressure off until the spring just falls out.
@swankshire6939
4 жыл бұрын
Oh perfect time I got out of work (at 1am) around when this went out
@gam3rk1d981
4 жыл бұрын
Hey jay they may make coil overs which will be able to do a lot more adjustments. And the good thing is your car is light so it an option to do.
@sijumosa
4 жыл бұрын
We are very happy to see that Coconut monkey is well and safe in this rough times... and, you know that you are in the firsts steps of a big trouble when "mom" have to watch two idiots play with an expensive big noisy toy !!!
@ohioisreal901
4 жыл бұрын
I love seeing my favorite computer man work on cars too its awesome
@joshkeesling2928
4 жыл бұрын
Woot woot nick glad to see him again in a video
@twisted7492
4 жыл бұрын
i like both your channels im a car guy and a pc guy .. love the car
@newtekie1
4 жыл бұрын
Nick we miss you!
@MrAcuta73
4 жыл бұрын
Don't play with race cars, just off-roaders so can't speak to it too much, but Bilstien has always treated me GREAT if there was an issue or a special-use case. A++ customer service AND products. Just dunno if they do cars...have to assume they do? Project looks fun. Though the standard LS swap....ok, at least it's a Chevy! Way to go getting that EFI sponsor...lucky dog. Buddy of mine is going to build and turbo the 292 from his 64 C10, going EFI. That will be a fun project and my first "street truck".
@conceptt
4 жыл бұрын
Omg he is back!
@bounzig
3 жыл бұрын
It's not every day someone drops a NKOTB reference xD
@Snakeboyzz42
4 жыл бұрын
@JayzTwoCars do a lowering shackle I've had some experience with my truck being lowered 8 inches in the rear and took out my blocks vs a lowering shackle. Be sure to check pinion angle though! Big thing
@Jayztwocents
4 жыл бұрын
We have various angle pinion angle shims. We are good.
@scottparkin4439
4 жыл бұрын
For what-it's-worth, those notches in the castle battlements are called crenels or crenellations. In case you were...you know...interested.
@Combba6
4 жыл бұрын
21:25 shockingly expensive you might say.
@IntenseBlue318
4 жыл бұрын
I bet you could find someone (probably local even) that can add some bolstering and recover your seats if you want them to still look mostly period correct.
@georgem.6136
4 жыл бұрын
Detroit speed has a complete sub frame assembly as well, i would do your research & look into it vs the Hotchkis
@Jayztwocents
4 жыл бұрын
Im not interested in their subframe or the $10k price tag
@NismospoolinOfficial
4 жыл бұрын
You have the same ADT alarm that i have and when someone opened and close the door in your video i thought someone was just walking in to my house at 3am 🤣
@jormungandr9840
4 жыл бұрын
Just got my Fox 2.5 coilovers with Dsc for my F150, I was dissapointed what condition they were in. Deep cuts in the remote reservoir, scuffs on the coils, stickers damaged ect on a product that goes for about $2,000 on any site. I heard about Fox's customer service being bad and sending the wrong stuff from friends in my truck group but I never 100% believed them. It really blows my mind how in the PC world if you buy from the best you also get the best cs support but Fox and BDS really drop the ball here. Though I'm just gonna deal with the damaged parts because I'm just gonna ding them up when I use my truck off road.
@Jayztwocents
4 жыл бұрын
I had nothing but good experience with my BDS kit for my Ram... same with their coil overs... but I have heard horror stories.
@EvilCerealBoX
4 жыл бұрын
Oh hey Nick is back! At least for the day.
@Auto1383
4 жыл бұрын
Jay go with Ridetech, they also have a new line out you may like.
@broggyja
4 жыл бұрын
I was searching for some of your Ryzen reviews (lol) and stumbled across this. It's awesome that you do car stuff too. Subbed!
@MalcySP
4 жыл бұрын
I've missed Nick in the videos. You need to get him to do more.
@7sins979
4 жыл бұрын
computers vids and car vids, my kind of content 👍
@shabadabadoo4326
4 жыл бұрын
Good to see Nick is still around somewhere. Glad the ronabad didn't get him.
@RobDawg08
4 жыл бұрын
Excellent work jay, cant wait for the next video.
@thomasforthe9274
4 жыл бұрын
Use solid motor mounts or chain it down with minimal travel. I had a 70 Challenger that had a steel plate that limited the engine travel from the factory. If the engine is well balanced you won't notice it much or at all.
@Jayztwocents
4 жыл бұрын
It will have Holley mounts
@MichaelSodapop
4 жыл бұрын
I heard fox shocks are mostly a brand thing & not really best performance. So I'm looking forward to your long term reviews to either support or debunk what I've been told.
@ZachLive
4 жыл бұрын
Those guys over there at Holley are great and make a great product
@adriaanserrao2016
4 жыл бұрын
Knok on wood😂😂😂😂 and the law and order bit just made it better.
@jeancoetzee2800
4 жыл бұрын
Solution to all the legroom and headroom arguments for Jay is Chevrolet SS (Holden Commodore) as it has literally all the space that anyone would ever want or need.
@ronhuret9782
4 жыл бұрын
the make a single screw spring compressor that goes in where the shock came out. It makes it way easier and they are not that expencive
@DustinB855
4 жыл бұрын
Your gonna love efi over carburetor worth the upgrade!
@jameslewis2635
4 жыл бұрын
With the way that Jay keeps pointing at various parts and say 'I've decided to replace that' so much of the time I am having trouble working out what parts of the car will remain original.
@2076649
4 жыл бұрын
Adjustable shoks are the way to go to dial in the perfect launch in drag racing.
@98GuitarTECH
4 жыл бұрын
Watching a video with two gorgeous muscle cars and yet every chance I get my attention is on the Madone on the wall
@PyroBlock
4 жыл бұрын
yup, getting a spring compressor ina 2nd gen basically impossible unless you use the janky method of 2 bolts and clamping down with a metal block
Пікірлер: 343