Where’s this Chanel been my whole life ? Beautiful mustang I think the style of mustang you have are the most sexy car of all time
@mr.know_it_all
2 жыл бұрын
I run 185-190 on the seat Which is around 430 pounds open @ 1.270 I’ve Heard of Engines hitting a wall but I’ve never had an issue with the engine hitting a wall, every engine I’ve built has pulled clean passed 7500 RPM with 35+ psi and even with 5/16 .080 wall pushrods. I have had stock 350 crate motor with 9 psi of boost hit a wall at 4500 RPM, free revved to 7500 rpm in neutral no problem , AFR was good , timing was good, maybe it’s the same thing.
@davidresar8256
2 жыл бұрын
I thought valve spring pressure too! But I agree that you need to know what's inside! Keep up the great content!
@alexaalsma4270
2 жыл бұрын
Great vids man, down to earth real and relatable keep em coming!
@oldschoolbudgetracing1458
2 жыл бұрын
You are my inspiration... lol. I decided I am going fuel injected with my all cast bottom end 350 and putting that on3 107 turbo on it. Let's see how far a cast bottom end sbc will go. Does have an ok set of heads (performer rpm) and a decent size roller cam though. Should be fun.
@Hammerback0
2 жыл бұрын
You may be surprised what it’ll hold.
@oldschoolbudgetracing1458
2 жыл бұрын
@@Hammerback0 I am hoping so.
@ScottGilbert50
2 жыл бұрын
I kept my ppp 3 speed shifter after I switched to a 2spd 400 and both 1st and 2nd on the shifter are 1st gear 3rd on the shifter is 2nd. So it seems you may have a 2spd 400!
@danielsullivan9865
2 жыл бұрын
Did it add a bunch of fuel when it fluttered? If it did it’s floating exhaust valve probably do the back pressure or not enough valve spring. Could be hydraulic lifters just becoming unstable at 6500 RPMs also.
@NoNameRacecars
2 жыл бұрын
Correction was minimal and removed.
@jamieblubaugh5153
2 жыл бұрын
Sorry, who makes your fuel pump pulley? That’s for an Aeromotive Black pump, 1/2” shaft with a set screw?
@NoNameRacecars
2 жыл бұрын
Robert Ette, you can find him on FB. Correct, this is for a black pump, with .5 this eliminates the side screw and the collar tightens with the three on the front
@jamieblubaugh5153
2 жыл бұрын
@@NoNameRacecars Thank you! What tooth count are you running on the pump?
@dannycoots9503
2 жыл бұрын
👍👍
@ja5435
2 жыл бұрын
I’ll trade you my Rich beautiful wife for the Mustang. Gorgeous car what’s her name
@Amxracer
2 жыл бұрын
😎
@johnparrish9215
2 жыл бұрын
What is your sparkplug gap???? It sounds like it needs to be tighter.
Пікірлер: 19