Thanks for the video, it was very informative. I’m using a DFPlayer and a pam8403 amp for a project which I initially had noise problems with because of the wiring between them. I found that getting them as close as possible solved the problem. Also I’m powering them both from the Arduino which doesn’t seem to be a problem. I am using screened wires for that though. Thanks again. Your coding style is a lot more disciplined than mine. I’ve taken note! 👍🏾🤓
@TBoy58_405
5 жыл бұрын
Good video, well explained. 👍🏾🤓
@felodimestivalen839
5 жыл бұрын
How could you do if you want to control a relay with the human circuit trigger? I love your idea! Thank you :)
@SleightofTongue
5 жыл бұрын
Love this - do you think you could do a similar thing with two arduinos instead of one, allowing for a bit more distance on the items?
@pqpvtncu
Жыл бұрын
Hi Alastair, I would like to download Arduino code, wiring diagram, parts list and other resources. Where can I find these files please? thanks in advance!
@danielpreda1981
4 жыл бұрын
doesn't even work on the breadboard. I tried the same circuit, the same programing. So first of all, there is something wrong with the serial. in the schematic you are using pins 8 and 9, in the programming you are using 2 and 3 (i changed the connections to 2 and 3). then If i plug in the computer to try to debug, doesn't map the device on any com. if I remove the power from the dfplayer, then there is no issue and I can debug. but the serials don't seem to work in the same time. second, I am getting really noisy signals even if I touch one of the contacts.I am using a 100uF. on top of that touching both contacts doesn't make any difference. still getting the same noisy signal back to A0 ranging from 400 to 1024.maybe I am using a wrong capacitor? I tried 220uF Doesn't seem to make any difference
@robokode
3 жыл бұрын
Thank you for the video. It is inspiring. Just a small doubt, is it not possible to achieve this using Makey Makey.Thanks in advance
@tristanpoder9099
4 жыл бұрын
Okay...finally. I'm using 10uF capacitor, and it sort of works, takes 1,5 seconds to get the voltage low enough, but works.
@EverythingsImmersive
2 жыл бұрын
Hey Alastair! I’m installing this puzzle but don’t know what to use for the metal bars. What metal did you use and how did you install it to make the handles?
@plp4626
2 жыл бұрын
Can you use an Arduino Uno for this project?
@veldtwalker
5 жыл бұрын
1:45 Hilarious.
@tristanpoder9099
4 жыл бұрын
Not working on me yet. I'm pretty sure, that it's not working, because the capacitor value is too big or too low. If i remove the capacitor, the value comes as it should be, but it's a little shaky.
@tristanpoder9099
4 жыл бұрын
Never gonna work
@tristanpoder9099
4 жыл бұрын
Okay...finally. I'm using 10uF capacitor, and it sort of works, takes 1,5 seconds to get the voltage low enough, but works.
@capital_pi
3 жыл бұрын
@@tristanpoder9099 Could we talk a bit about it? I'll try to make this happen and i'm little insecure
@tristanpoder9099
3 жыл бұрын
@@capital_pi yea. i’m willing to help. where can we talk?
@TomBollandLtd
4 жыл бұрын
I love this and have had some success. The only problem I've had is that when I've put the smoothing capacitor in, my analog value starts at 0 and very very slowly rises up to 1024. I just omitted it before but now I'm getting a noisy signal that sometimes triggers when just one pipe is being held.
@PlayfulTechnology
4 жыл бұрын
What value capacitor are you using?
@TomBollandLtd
4 жыл бұрын
@@PlayfulTechnology 100uF (:
@tristanpoder9099
4 жыл бұрын
@@PlayfulTechnology What value did you use??????????
@tristanpoder9099
4 жыл бұрын
Okay...finally. I'm using 10uF capacitor, and it sort of works, takes 1,5 seconds to get the voltage low enough, but works.
@StevenLoprese
4 жыл бұрын
Same thing happened to me, took forever for the value to creep back over 500. I took out the capacitor (was using 100uf, he never gives a value for his capacitor) and that fixed it, I am not playing sound, just operating a magnet, so i just omitted the enum and switch/case left it as a simple if/else code and no capacitor, works perfectly. No interference. no false signlas.
@jaycee1980
5 жыл бұрын
just hope you dont get a copyright strike!
@PlayfulTechnology
5 жыл бұрын
Parody is fair use!
@Zelebobaable
5 жыл бұрын
THX!
@charlesarieschang4317
5 жыл бұрын
what wire do you use to put in the metal bar to make a series?
Пікірлер: 27