I'm so glad I found your video. I'm getting ready to wrap my black kitchen appliances with pink vinyl. I've got the EZ Auto Wrap in my cart on Amazon right now and I have been hesitant about buying it but after watching your video, I feel better about it, so I'm going to go ahead and purchase it. You've answered all of my concerns. Thanks for sharing!
@inthelifeofleif8268
3 жыл бұрын
I would totally support doing that! As long as not too curvy though
@carlahammond8319
3 жыл бұрын
@@inthelifeofleif8268 I went ahead and ordered it. It's saying I should get it sometime in the middle of February. If I can remember, I'll let you know how it turns out and maybe send some pictures. Thanks again!
@sexyfarts2019
3 жыл бұрын
@@carlahammond8319 i bought tintimg fory car tail and healights. The edes exactly as shown dont like to fold down and stick. Cut close and make it lay as flat as u can and itll look decent enough
@carlahammond8319
3 жыл бұрын
@@sexyfarts2019 That's a great idea. I never would have thought to do that. Thanks for the advice!
@Guitargoddess843
3 жыл бұрын
Ah! I'm in the same boat! I grabbed some Pink Laser holo from ezwrap to wrap my computer case! Luckily it's alot of straight edges, but the front of my case is textured, so im a little worried about tucking it into the slots- that's gonna be a big job! (It's the corsair 275R Airflow case) The Pink holo looks AMAZING tho! Subtle, but perfectly so
@ashleyfrancis8951
5 ай бұрын
Damn i wish you lived in Houston or anywhere in texas😭😭
@wheeliemoto8883
2 жыл бұрын
Damn thanks for the help and the good motivation I think ima give it a try :)!
@natthaphonnoble2407
2 ай бұрын
I got the EZ AUTO 5D carbon fiber wrap and it didn’t turn out well I’m hoping it’s more of a skill issue lol!!
@inthelifeofleif8268
2 ай бұрын
@@natthaphonnoble2407 yea it is doable but it’s not easy to work with. Wouldn’t put it on anything worth much
@natthaphonnoble2407
2 ай бұрын
@@inthelifeofleif8268Thanks man, I think I learned that the hard way lmao. I just ended up stripping it off and salvaging just enough for my gas cap and door handles, they turned out pretty good. What I’ll most likely do with the roof is try the tinybot 6D vinyl which I’ve seen multiple videos from pro wrappers who have really been impressed with the material and how realistic and easy it is to work with.
@sweetycane5478
4 ай бұрын
Wondered if you used heat? I did see that it says heat activated. I hope so cause I'm waiting to wrap a trike.
@donaldbaker6961
2 жыл бұрын
Thank you for being honest I bought the cheap just to try out to start before I spend a G on some and you basically just are not happy with the color I see how rolled it looked a lot darker 👍
@inthelifeofleif8268
2 жыл бұрын
Yea and install is not good at all
@datghettoazn127
3 жыл бұрын
I was going to just wrap my headlights with the light smoke. Hope it turns out alright 🤔
@inthelifeofleif8268
3 жыл бұрын
It's not bad at all. Let me know if you need any help!
@edgartorres474
3 жыл бұрын
If I want to wrap my hood, roof and trunk how much to I need? I’m
@inthelifeofleif8268
3 жыл бұрын
I'd suggest 20ft at least
@CUSTOMWORKS7.3PSD
3 жыл бұрын
Steer clear of ezwrap I did the metallic red in 5 months of being on the vehicle keeping in mind 2 months it was inside the wrap color was red now its pink and ezautowrap is just full of excuses
@inthelifeofleif8268
3 жыл бұрын
That's good to know because I was considering doing my whole car in a different color just to test but maybe not now
@CUSTOMWORKS7.3PSD
3 жыл бұрын
@@inthelifeofleif8268 Do your self a favor go with avery d I wrapped my tow truck with that way last year and it looks like I just put it on and didnt need any 3m primer
@inthelifeofleif8268
3 жыл бұрын
@@CUSTOMWORKS7.3PSD yea I know I use Avery a lot. I wrap cars on the side and use Avery, 3m, oracal
@wrinklingtissues
2 жыл бұрын
What are some legit Avery D vinyl wraps? I seen aome on ebay but dont know which to trust
@CraftedDiamond10
3 жыл бұрын
Ever work with Vvivid vinyl? Any good?
@inthelifeofleif8268
3 жыл бұрын
Yea I have. It's ok but hard to work with. Honestly it's kinda like this stuff. I'd use Avery every chance I got
@marblesrichard
2 жыл бұрын
I have played with vivvid ,, its quite think and sticks really easy .. More pliable is 3m and Avery .. I have used KPMF my experience was not the best whether if it was me or the film can not say .. But Avery is by far the easiest
@edking2770
3 жыл бұрын
They don’t cut right
@inthelifeofleif8268
3 жыл бұрын
What, the cheap vinyl?
@bearbabypetals7419
Жыл бұрын
Hi bro, have you tried any more ezautowrap vinyls?
@inthelifeofleif8268
Жыл бұрын
I’ve not! I knew from this one time that I didn’t want to do a full car In it
Пікірлер: 36