Great job! I use my win10 PC for all sorts of serial stuff. Arduino, Raspberry Pi, CHIRP, etc. After watching this video I marked my case with the COM port numbers. 😂I'm an old school guy anyway, so I have to write down everything. 73's WD8OHE.
@markatdvcrc
4 жыл бұрын
Thanks for your video's Stue, great help with N1MM. Would you have (or make) a video about what I think I port sharing. I have N1MM setup with my TS-590sg performing CAT control and the works, but I also want to use an SDR to control the rig. It seems like I need a "virtual" com port that is addressing the same cable that goes to the rig which is already in use by N1MM. Any thoughts would be great. Radio is the easy and fun stuff, but working with MS Windows is a daily challenge.
@AG6AG
3 жыл бұрын
Hi Mark, Wow... I can't believe I missed your message! It's interesting that you ask that question because it was a huge problem for me when I setup all this stuff. Let me share some ideas... First off, N1MM+ does not 'share' well with anything. It want's to control the radio and everything about it. There are other issues as well with other Ham software packages that give you trouble as well. I ended up buying a package called Win4Yaesu that could control my rig and had 6 virtual ports that you could setup to have other software 'think' it was talking directly to the radio. This was my final solution. But, although this software is available for other radio brands, it is limited as to what it supports. If you have an FT991, FTdx???? I would strongly recommend it, but that's not your current setup. I have found something interesting in HDSDR that I have just begun testing. It is dependent on Onmirig software, but seems to solve the problem for many. It basically uses a virtual null modem cable configured through com0com and presents a TS-50s to other software connecting to it. Once I complete the test with N1MM+ I will post the video. Stu AG6AG
@markatdvcrc
3 жыл бұрын
@@AG6AG Great, thank you for that info. No problem on the delay, I'm still trying all sorts of options. The SDR control I have dropped by the wayside, but I have added a second cable to the TS590 and now it has two com ports so I can run two pieces of software without virtualization. Some say that is also looking for issues, but it is a neat feature of the 590 to have two serial ports. I'll keep an eye out for new vids, I love all the information. Thanks!
@zurab1686
6 ай бұрын
Windows 10 Home при установке старого устройства через диспетчер, появился желтый флаг, т.е. ошибка. Как исправить?
@1949ala
3 жыл бұрын
great presentations
@genehead8059
2 жыл бұрын
I tried to make my Dell Latitude 2110 use USB serial and failed N6NN
@AG6AG
2 жыл бұрын
What USB Serial device were you trying to use? Stu AG6AG
@HamShackReviews
3 жыл бұрын
The com port section in device manager is missing, what do i do from there ?
@AG6AG
3 жыл бұрын
This usually implies that the device is not being identified by Windows. With the Device Manager open, plug the device into the USB port. Look for something showing up with a yellow or red mark on the left side of the device description somewhere on the tree. If you see something appear, it usually means that you need to download a driver for that particular device. This is common with Icom and Yaesu radios. Just go up to the product's web page and download the drivers for the device. If nothing shows up anywhere in the tree, you may have bad hardware. Hope this helps, Stu AG6AG
@skyshooter4009
3 жыл бұрын
Go to view and then click on show hidden devices. If it doesn't show up then go to Action and add legacy device. Scroll down to select Ports (com).
@y_x2
3 жыл бұрын
Avoid Prolific adapter at all costs... it may crash your computer!
@AG6AG
3 жыл бұрын
Hi Andre, The actual issue was with the counterfeit chips. For the what we use com ports for in Amateur Radio the 'real' Prolific chips are fine. If you are concerned, you certainly can order out the FDDI chip set devices... Stu AG6AG
@8du
3 жыл бұрын
Been using Prolific for many many years and it runs flawlessly. Prolific Driver version 3.2.0.0 is what you need
@y_x2
3 жыл бұрын
@@8du Yes if you have the right one but you don't know if you have a clone! Prolific did a very bad move to clone user that why I don't recommand it.
Пікірлер: 17