You've inspired me to go put my drill and impact head to head driving 3 inch screws. brb. Edit: I just tested my Milwakee M12 brushed impact and drill. WOW! The drill drove the screws literally twice as fast as the impact. I also tested my Hart Brushed Impact and Drill and same results. Drill drove the screw effortlessly with no noise and faster, while the impact made tons of noise and took longer. I'm so surprised that I have been using the impact for driving screws and the drill for drilling holes. This entire time I could've just had a drill and been good to go. Awesome!
@ToolswithSoAlz
11 ай бұрын
Thank you for sharing your experience
@ToolswithSoAlz
11 ай бұрын
Can you prove him wrong?
@wilfred2547
11 ай бұрын
Thank you good sir 🫡
@sumdup
11 ай бұрын
What’s an impact driver 😄
@3Hose
11 ай бұрын
The overall human power that you have to use with down force a radial forces is much greater with a drill. Faster yes, more tired after 300 screws absofukinlutely. Also, you have much more control over the impact. Also again, how much did he pay you to agree with him?
@alexanderlavoie5461
11 ай бұрын
As a mechanic, drills are for drilling, and impacts are for fasteners.
@haretauwhare5959
10 ай бұрын
That woukd be the only use for a impact driver, I mean imagine snapping a bolt off a engine mount because there to much torque, but I’m saying that that drill does have a clutch like a impact driver too
@tobybigham4196
10 ай бұрын
Impacts are great at removing fasteners. Drills are great for putting fasteners in.
@dcgo44r
10 ай бұрын
When you try to draw mechanics into the argument and so far fail! 😳😂😂😂🤦 but here I'm with you 99.9%
@deandufresne3671
9 ай бұрын
@@haretauwhare5959the clutch on an impact and drill are designed to do opposite things. An impact uses it to increase torque. A drill, reduce torque. I guess I only use impacts to remove rusty bolts that drills just stall. Im surprised this is like controversial news. Yes drills can drive screws.
@tobybigham4196
9 ай бұрын
@@deandufresne3671 If you guys really want to get technical. A drill has 2-3 options depending on the model. But I will talk about the main brushless drill model I purchased from Ryobi. It can do Hammer, Drill, and Torque by clutch. A impact only has the Hammer feature. Any questions?
@elliotokirie3404
11 ай бұрын
I use both everyday, impacts are lighter and are less tiring over a workday
@jflo_05
Ай бұрын
Yup I even stepped it down from 18v to 12v impact Milwaukee as my daily. just cause of the size. Perfectly hangs of my pocket. I realized it has more than enough power.
@mdood9299
11 ай бұрын
There's a reason that they typically come in a kit together.
@vincentanatriello9296
10 ай бұрын
Good point
@tobybigham4196
10 ай бұрын
It's called marketing. You can try to sell 2 separately for say $120 a piece for a 85% profit, or you can both for $200 for sure for a 70% profit. One is riskier than the other, but one incentives sales.
@mdood9299
10 ай бұрын
@@tobybigham4196 Strange, that particular marketing has a lot of utility for most people.
@ToolswithSoAlz
9 ай бұрын
@despraterado588 Helps if you kids know what you're talking about before offering up an opinion
@ToolswithSoAlz
9 ай бұрын
@@despraterado588 ma'am a drill is called a drill driver because it drives. Let it sink in.
@protein9023
10 ай бұрын
If “I have a tool channel but never actually worked a day in my life” was a person
@ToolswithSoAlz
10 ай бұрын
Ma'am you should get your husband to explain the video to you since you don't have the brains to figure it out for yourself
@Carter_Bourne
21 күн бұрын
@@ToolswithSoAlzdude you’re not winning anyone over
@ToolswithSoAlz
21 күн бұрын
Honey, I'm not trying to win over the Mentally Handicapped. I know more than you girls, have done more than you girls, and that will always be the case.
@dive-bomb
13 күн бұрын
@@ToolswithSoAlzwork in heating and air or refrigeration and you will basically never use a drill but to drill evaporator bolts but be burning your driver 25/8 on them sheet metal screws
@MrJJDoggy
2 күн бұрын
Bro im just here for the entertainment and that i got 🤣🤣🤣🤣😭@ToolswithSoAlz
@dlmonsterlb4689
11 ай бұрын
My impact weighs significantly less than my drill. Holding it ALL day, I'm going to choose the impact. When I need a drill, I'll get the drill. With that, a drill has a multitude of uses beyond the predictable. If you have a screw with a messed up head, tighten the drill around it if you can get enough grip on the screw and reverse it out
@fabianmayer
11 ай бұрын
Yea, a drill can be a hammer too
@Urapunk
11 ай бұрын
@@fabianmayerevery tool is a hammer if you use it wrong enough
@Crazywaffle5150
10 ай бұрын
Must suck being soft.
@brendenperry3770
10 ай бұрын
@@Urapunkmy gen 4 m18 impact is one hell of a hammer
@jereoq
10 ай бұрын
M12 gang rahh 💪😠
@Sinkorswim317
11 ай бұрын
In the automotive industry the impact is the superior tool.
@Jester_The_Jynxster
11 ай бұрын
Industrial mechanic, same here. Even in the rare occasion I do need to drill wood, I have a set of hex drive drill bits so I don't need to go dig the drill out. It's a little slower, but if it saves me the walk back to the shop; then it's fine by me. 👍
@Sinkorswim317
11 ай бұрын
@@Jester_The_Jynxster exactly.
@T34theAmericanheavy
11 ай бұрын
Impact driver and impact wrench is a apples to oranges comparison
@DentsideAddict84
11 ай бұрын
If you’re using an impact driver while working on a car, you’re doing something wrong….
@RobertVivian
11 ай бұрын
For sure, I can fit that compact M12 driver anywhere I want.
@jonathanfreeman7761
11 ай бұрын
I always have both simply because one is not superior to the other. They excel at at different levels in each job but are interchangeable if necessary
@patrickglaser1560
11 ай бұрын
If they're breaking your wrist... you got soft hands boi
@ToolswithSoAlz
11 ай бұрын
Yes sir
@disklamer
10 ай бұрын
Or, you know, just set the torque lower than your arm strength.
@JohnDoe-jp6zs
10 ай бұрын
Kinda what I was thinking. Lol
@JuanHernandez-ov8wv
7 ай бұрын
Milwaukee drills are no joke some can snap wrist owt of socket if u are not careful.even if u think your super strong. There's always that one drill n . moment.
@Tylerbkelly14
6 ай бұрын
@@JuanHernandez-ov8wv When doing something serious at full torque settings, I always chuck my drill up against my leg so if it snags and twists it's not breaking my wrist lol.
@BlackenedEclipse
11 ай бұрын
I’m happy to own both, they really are different tools if you know what their strengths and weaknesses are, but they both can do some similar tasks so it’s really down to preference.
@Fatboypeet
11 ай бұрын
Yep, pull out the impact for the hd stuff imo
@fernyisable5
11 ай бұрын
I wanna see someone frame heavy metal with a hammer drill 🤣🤣 🤡
@ToolswithSoAlz
11 ай бұрын
@fernyisable5 Princess if you're not smart enough to understand the video then don't advertise it here. Maybe get your husband to explain it to you.
@alexbiggs6660
11 ай бұрын
@@scottpollock1714I came across this dudes videos on Instagram a few months back and this is exactly how he was in every single comment section. He’s definitely a keyboard warrior who attacks anyone who doesn’t automatically agree with him. It’s pretty sad and pathetic. I truly wonder what he does with all the tools he buys considering he definitely doesn’t use them for building a single thing.
@handancheese
11 ай бұрын
Dudes really like “bruh drills so much better” I say they have their purposes and situations
@rbarr1200
11 ай бұрын
They’re great for automotive too. If you set your clutch up to 1 - 3, you can guarantee “hand tight” torque. Where as impact varies on finger control, which is inaccurate and not reproducible.
@Fobes
11 ай бұрын
Depends on the impact. Mine can detect when the fastener it tight and stop turning.
@ToolswithSoAlz
11 ай бұрын
@Fobes most of them can
@estebancamachomartinez724
11 ай бұрын
I buy whatever the fu ck I want with my money😂
@jimmyreynolds4293
4 ай бұрын
That’s right you can’t be closer to the truth
@OItsBear360
2 ай бұрын
Best comment ever 😂
@metallatem3100
10 ай бұрын
It because it weighs 2x as much and if you work all day that matters as a matter of fact I use makita because it’s smaller and affordable. I’ve got time to change batteries on water breaks if needed but I need water more than my makita need’s batteries and yes I use the impact it also fits in a lot of places a chuck drill won’t not to mention tapping screws are meant to be driven with a impact driver and bit.
@acestreet494
11 ай бұрын
I use both. But I primarily use an impact driver because its more compact, lighter, and usually faster than driving wood screws with a drill. Also to adapt the drill chuck to a driver makes the drill way to long to be useful. It’s all personal preference.
@Nate-ld7zj
11 ай бұрын
I like the drill when screwing some stuff because to me it’s quicker, like metal roofing and metal siding, I set the clutch and just drive, don’t have to worry about over or under driving. The impact is slower in my opinion because it has to impact the screw in instead of just turning it, but they both work good
@ctrlaltdebug
6 ай бұрын
Impacts are also less likely to strip Phillips screws.
@yoshi2tvmes
3 ай бұрын
@@Nate-ld7zj the new gen 4 m18 impact has a new metal roof setting on the impact. It stops when it's done even if u don't let the trigger go
@Vidar93
2 ай бұрын
@@ctrlaltdebugless likely to strip more likely to snap.
@CPL_Clay
11 ай бұрын
Home - drill driver Work truck - impact driver and hammer drill I almost never grab the hammer drill unless using drill bits, mostly because of the size and weight compared to the impact driver. But for home use, my drill driver handles pretty much everything I need it to do in the house.
@gravyd316
10 ай бұрын
The impact driver usually comes with the drill. One is not better than the other. They're different tools with different applications.
@ctrlaltdebug
6 ай бұрын
The drill is for drilling holes and running rotary brushes and sanding discs. The impact is for fasteners.
@ericperez6207
3 ай бұрын
For woodwork I suppose I can agree with you but in my line of work where I’m running fasteners through metal and concrete… I need my impact more than my drill
@bradbeck2601
11 ай бұрын
The drill clutch is great in the heavy duty mechanic / industrial world. Makes sure you don’t break drill bits when drilling small holes, and when you’re drilling very large holes it makes sure you don’t break your wrist or give yourself a fat lip. Also good for running in taps and metal screws without breaking them.
@humbertomacias3239
11 ай бұрын
🍻🍻 someone who knows
@AngelMartinez-ey3hu
11 ай бұрын
If you are not a finish Carpenter, then you don't use the clutch on a hammer drill. The trades either open a hole in concrete or something else and then use an impact driver that is lighter and has a bit for the specific screw you're using. If it's not opening a hole in concrete or using a holesaw, an impact does it just fine.
@chewysfish6967
11 ай бұрын
I had to drill through some bamboo and then drive in a 6 in' structural screw. I only had one, tool so I had to switch out the bit after each hole I drilled. the impact driver made the switching easier.
@DeeperImageAutomotive
10 ай бұрын
I use both, but the Impact Driver has many advantages, including a smaller footprint which helps in tight corners.
@Azara1th
11 ай бұрын
Both is best - drive fasteners with the impact, drill with the drill, don't have to mess with changing bits
@shadyassassin0856
11 ай бұрын
Ill use the drill for finish work because of the lovely clutch but otherwise impact all the way. Way better feel and control, and ive never heard a complaint about the drive time of a milwaukee impact
@Axle-Mackwithasinglestack
11 ай бұрын
The newest generation of Milwaukee drills, have an anti kick back feature. If you are this driving pan heads or screws. The impact is the way to go. If you have to drill and drive, the drill is the way to go. Or keep a drill for drilling and impact for driving
@jkunz27
9 күн бұрын
I have 4 go-to tools, all Milwaukee. M12 compact drill for the light stuff. M18 full-size drill for the heavy work. M18 Surge Impact for heavier driving work, and the "Installation" driver for most day-to-day tasks.
@ToolswithSoAlz
9 күн бұрын
Perfect
@clutchbleach2057
11 ай бұрын
Top comment already said it but for me I'm predominantly dealing with cars so the impact is better suited. It was also on a crazy sale so it was a win
@intruderIG
10 ай бұрын
Many years ago, back in Germany I used to do garage doors, window shutters, anti burglar systems and the drill was the only tool, no impact And you are a hundred percent right it worked .
@ToolswithSoAlz
10 ай бұрын
Thank you for sharing your experience
@brianstollings6416
9 ай бұрын
You have a great point. Impact is still superior in my opinion. An impact does a drills job better, than a drill can do an impacts job. At least in my limited experience.
@PhillyFail
11 ай бұрын
Oh I use my DeWalt with a clutch all the time for airplane s***. Makes putting floorboards down a lot easier
@tomdolton2960
11 ай бұрын
Put a Drill on 4 or 5 and it will put a drywall screw flash to drywall very nicely
@MontyRoyal963
11 ай бұрын
Exactly...
@mccartneystuart
10 ай бұрын
Wood or metal stud?
@zackdurham4313
11 ай бұрын
i prefer my impact driver just cause its lighter and smaller in size for tight spots
@billymccoy9155
9 ай бұрын
bingo, don't need the weight for hvac, have a chuck bit for non impact bits
@deedontworry
5 ай бұрын
Love the Milwaukee Fuel impact driver! ❤
@jonathansherwood5841
11 ай бұрын
I love using the clutch on my drill, usually prevents me from stripping out the plastic panels in all these new vehicles and small screws in other stuff. I hear from the other guys at work, "Just use the impact trigger properly and it won't strip out!" And these are the same guys who cross-thread bolts and let the next guy worry about it, SMH. 🐺🔧
@ToolswithSoAlz
11 ай бұрын
Professionism is a skill that can't be taught
@M0N0T0N0US
10 ай бұрын
I hate impacts, I only use a drill now, I don’t even own an impact anymore..
@strangetamer69x12
11 ай бұрын
You’re partially right in my mind anyways. I noticed you have the drill/driver adapter to accept 1/4” hex bits which a lot of people don’t have or even know it exists. Without that adapter, a drill/driver isn’t really something you should use with any 1/4” hex bits because they’re just going to get ruined & wear out extremely fast to the point they’re completely rounded off. Impact drivers I think are better if you have trigger discipline & don’t just kill fasteners by “floorin’ it” whenever you pull the trigger because the amount of 1/4” hex impact rated bits are a lot more common than bits made for a drill or a chuck that you tighten down onto the bit. At least these days. & impact drivers have more torque & power to handle tougher applications that even the most powerful drill/driver on the market wouldn’t be capable of handling. I think the clutch on a drill is better for using on fragile workpieces or working on someone’s expensive countertop/cabinet where an impact would just be to risky & more likely for an expensive mistake to happen. Maybe you should make a video on how to use a drills clutch to educate people. Because a surprising number of people don’t even know what the clutch is used for.
@ljefferson51
10 ай бұрын
It's just easier and faster to switch bits on an impact. I've also messed up a lot more Philips dry wall screws using a drill than the impact, granted I wasn't using the choke and I was still new to dry wall at that time lmao
@1992tkl
11 ай бұрын
Let the next guy be the one to strip out the screw/hole
@theguy192
11 ай бұрын
New Milwaukee drills don’t break wrist at the end of drilling holes they have a auto stop that is bad ass
@mattadams7922
11 ай бұрын
And Kobalt, Flex, and skil have had that for a long time. Chevron has been using the e stop for drills for at least 5 years maybe more
@axiosw0774
10 ай бұрын
@mattadams7922 what about bosch?
@milesd3928
10 ай бұрын
This man is absolutly correct. The drill is a multi pourpous tool, I love my impacts but they do have a place in the tool box just like any other tool. Personally I dont drill/screw into wood much, and taking machine screw and smaller bolts out of semi truck frames and such makes the impact my go to, but putting up TV wall mounts I will take the drill anyday since the impact typically just snaps the lags.
@sealstech8087
11 ай бұрын
Impacts have a particular niche for driving of small screws quickly with little fatigue to the user. I might screw down 50 wall plates a day. I could absolutely use my 3 speed hammer drill for it clutched at 2. Or.. I could use my 12v “smart” impact that weighs 1/12 what my hammer drill does. I keep both for particular things. Also have a 20v impact for driving self tappers into iron because a big drill will snap them without thinking twice while a little impact just doesn’t have the guts for it.
@ZSnowman
11 ай бұрын
Impact->easier to change bits for a faster environment. But anywhere that you are doing finish work or work that requires delicate power, the clutch of the drill will be your better friend.
@Tele-strat
Жыл бұрын
I still don't have an impact for plumbing, I've been using the same DeWalt hammer drill since 2014, before that was a Porter Cable 1/2" drill.
@ToolswithSoAlz
Жыл бұрын
The drill is much more versatile
@majorpayne5289
10 ай бұрын
Yep, my old 1/2” 18v Milwaukee w/ hammer has served me well. Gotta use the clutch. Speaking of Milwaukee… I was helping my brother remodel his bathroom. He told me to drill the floor plate. Handed me the huge 1/2” M. no clutch. Started to drill plate w/ a paddle bit & yep, it hung up & so powerful it actually threw me against the wall. I was 14 & skinny! He laughing his butt off. Talk about torque!! Glad for the clutch!
@drewrinker2071
11 ай бұрын
Ppl keep telling me drill is dead but I still use mine all the time, both tools are needed imo
@senileshooters1126
11 ай бұрын
Just like everything else in life, when you use the right tool for the situation it goes much smoother. Like trying to pull a nail with Phillips head screwdriver 😂
@saltminer1255
11 ай бұрын
Impacts are smaller and easier to use especially when changing bits i only youse my drill when im using bits that dont fit in impacts or i need the hammer function or using hole saws. They make impacts for a reason.
@michaelbrent7830
11 ай бұрын
Impacts are more compact. It's not about drilling in an open shop on a flat plane. Try crammed in a cramhole at an angle... impact wins every time.
@Hardawayfits
13 күн бұрын
As a woman in construction...I will say this. I had to learn the hard way. But it made me one of the top 5 best workers😅😊
@jwilson1484
Жыл бұрын
If I had to choose only one, drill all day.
@ToolswithSoAlz
Жыл бұрын
Exactly
@vljYWOK
11 ай бұрын
Funny, I would go impact all day. Neither of us is wrong, just get the work done in a timely manner and it don't matter.
@BackyardRussia
10 ай бұрын
@@vljYWOK well how much time are we talking cos a drill will be faster 9 out of ten times maybe more. And that is just screws. If you are drilling holes there is no way an impact is faster
@vljYWOK
10 ай бұрын
@@BackyardRussia its not just how fast the tool is, its also how much setup is required to get a drill on it and the weight of the tool. I would love to see a guy up a ladder reaching your hand out to maximum extension sideways and drive in a non pre drilled 3" #10 into something horizontally, or vertically up. Another one would be a 1/4 lag into a predrilled hole in the same condition. purist drill guys on the crews I've been on spend more time moving ladders than using the drill. Mind you, I'm not new construction, I'm remodeling. This means that I'm stabilizing the sins of the past while building a strong addition and I don't have the luxury of always having scaffolding or being able to be in the prefect stance and user and tool alignment to get the job done. Same reason I use mostly 12 volt tools and not 18 volt. the lightness of the tool means I'm not repositioning nearly as often, I set my ladder and can get the work done for everywhere my arms can reach instead of the drill purists being about half that. now imagine setting up ladders on steep and variable cross slops constantly, to get 12 feet across, I need 2 setups, drill guys end up with 3 or maybe even 4 if they cant use the tool off handed. Like I said, neither of us is wrong, but I personally own 2 12volt impact drivers, 1 18 volt imact wrench with adapter to just about anything including a drill if needed (for the big stuff on industrial remodel jobs). 1 12v drill/driver, 1 18v right angle drill, and 1 nasty big 18v hammer drill. all the 12 volt stuff gets the most use as I am typically doing house remodeling, and typically I have 2 of the 3 up the ladder with me at the same time 50/50 if its double impact or one drill one imact. I get it, yall love your drills, thats fine. I did that crap for the first 10 years of building, then I got my first impact 20 years ago, and while slower, I get more done at a constant gait, tortoise and the hare.
@parrotgaming1960
9 ай бұрын
@@vljYWOKfinally a real builder. Impacts are way more user friendly on the job than a drill. Especially if you need to change bits often like in remodels or if like you said, you work in tight spaces and up on ladders where weight is a serious concern.
@JWill6969
11 ай бұрын
I use my clutch all the time. I default to the impact more than I should tbh but I definitely know how to use the drill to it's full potential
@ToolswithSoAlz
11 ай бұрын
I like it
@hitmarkx241
10 ай бұрын
The difference is weight and convenience. Impacts are inherently lighter and more compact. The quick attach is convenient and doesn’t rely on additional adapters to function. The drill is a “stronger” tool but the impact is King.
@DrewsBackYardMechanics
10 ай бұрын
Two things I'd like to say, the first thing is yes it can be using used to drive screws but changing bits can take longer, and the second thing is if the drill has to be set higher for harder to drive fasteners you are going to have more strain on your wrists and it's going to be harder to use
@damienmidanik9680
11 ай бұрын
When you work with nuts and bolts rather than screws and drill bits, the impact is a far superior tool. A drill won’t break a bolt loose. I will stick with my impact tools.
@yadabotbingo
11 ай бұрын
Right on. Drill with clutch works better for running or removing screws, without all the ratta-tatatt noise. impact drivers often have too much bounce. Impact drivers have their place, but aren't the single best choice for everything like they are being used today.
@ToolswithSoAlz
11 ай бұрын
Yes sir
@Skateordine
5 ай бұрын
👏🏼👏🏼👏🏼hats off to this man. He’s right. I have this argument daily with apprentices. Impact drivers are for specific things. If you use your tools for what they are intended and use them properly you won’t be at risk of injury or burnout of tools. Keep doing this content.
@ToolswithSoAlz
5 ай бұрын
Thank you
@SavageVoyageur
28 күн бұрын
Agree with you totally, use your drill with the clutch to drive in screws. Start out low setting and increase until it goes in to your required depth.
@MontyRoyal963
11 ай бұрын
He's right. I can do a multitude or tasks with my m12. Delicate tasks like installing components onto computers and network serves then use it for carpentry and sending screws into 2x4s.
@ToolswithSoAlz
11 ай бұрын
Thank you
@DDSNAG709
11 ай бұрын
Your absolutely right I rarely use the impact because the drill driver puts screws in faster and quieter.
@ToolswithSoAlz
11 ай бұрын
Exactly
@daedae5442
11 ай бұрын
I went to harbor freight and got a brand called Bauer and was about to get a impact too but thought of this idea as well lol. but ya definitely works great for drilling holes and driving screws I've also used it for taping threads in square tubing metal.
@glennwong4494
6 ай бұрын
My Milwaukee 1/4" hex screw driver is better than both for screws. My impact is great for heavy duty situations like lag bolts but the hex screw drivers is my go to tool. It has the clutch feature just like the drill.
@adamacosta7279
11 ай бұрын
I found out that my supervisor didn’t know what the adjustable clutch was for, he didn’t even know what it was
@ToolswithSoAlz
11 ай бұрын
I'm not surprised. Still sad
@Fatboypeet
11 ай бұрын
What’s it for?
@Fatboypeet
11 ай бұрын
And what is it actually??? Asking for a friend lol
@adamacosta7279
11 ай бұрын
@@Fatboypeet it’s for allowing the clutch to disengage at a given torque, which prevents ruining the wood when you over-tighten the screws
@ToolswithSoAlz
11 ай бұрын
@adamacosta7279 100%
@DanielGloverTheGreat
11 ай бұрын
Drill is perfect to ensure you don't overdrive and ruin a piece you're working on. Impact driver is good to tighten metal to metal or budge a lag that isn't moving.
@seemoney0314
10 ай бұрын
My Milwaukee has an auto stop. It won’t let you break your wrist. I use it for a lot of stuff but i use my M12 surge more than anything. It’s just so delicate and small. It’s nice for certain jobs. I use my drill a lot, I’ll get my gen 4 impact out if I need it but we all have our own ways of doing it.
@donaldstepp4850
10 ай бұрын
I use impact 80 percent of the time, drill i use for fastening , drilling pilot holes and using a wire wheel to clean motor shafts for motor replacement (electric motors)
@anthonylacorte5811
11 ай бұрын
I been in the carpentry business since I was 14 and I have been saying this since I was 17.. my impacts just collect dust until I’m working on a vehicle
@weedchilling420baked4
11 ай бұрын
They’ve never used an old Milwaukee 120v concrete hammer drill before. That shit will actually break your wrist if you aren’t careful
@ToolswithSoAlz
11 ай бұрын
Kids seem to think nothing ever got done until they invented the impact driver
@humbertomacias3239
11 ай бұрын
Slap a Diablo 4 cutter carbide rebar cutting bit on that bad boy 🔥🔥 yes that shit is FUN and can mess you up lol
@Nate-ld7zj
11 ай бұрын
I found that out with an old 120v Milwaukee right angle drill my first week in construction, using a hole saw between studs, it bit my hand pretty good lol, I know how to position myself now though
@ActingLikeABoss
10 ай бұрын
Only thing worse than that is a handheld core drill. Talk about terrifying
@user-cq8uc4jp8n
5 ай бұрын
I agree drill is stronger and versatile with the clutch.. the impact is great if you’re framing, so you can drill with the drill and then screw with your impact better to have both ready to go
@brookelord3448
11 ай бұрын
I hate impact drills. You have much more control with a regular drill. I use it for machine screws and furniture assembly even though the directions say "no drill." A drill can turn as softly as a screwdriver if you press lightly on the trigger and use the clutch and the torque settings. The settings on the drill make it impossible to strip a screw or hole.
@_P0tat07_
Жыл бұрын
What’s the point of buying tools if you can’t buy more of them 😂
@ToolswithSoAlz
Жыл бұрын
The people that think the impact driver is superior to the drill should not be buying tools
@rodneybrown6326
Жыл бұрын
Only a rich man can afford cheap tools. 🤪😂😂
@kerrygibbs8198
Жыл бұрын
Both have unique good features. Not that expensive to own both
@ToolswithSoAlz
Жыл бұрын
Yeah
@fireburst102
11 ай бұрын
I’m the heavy truck industry, the impact driver is a must in tight places. Driving torx and Phillips screws in and out of the dash and other tight interior spots with a drill would be a nightmare and impossible in some spots.
@wienerguy7822
8 ай бұрын
I fabricate signs for a living and there's a good use for both. Impact for metal, drill with clutch for delicate things like acrylic faces.
@foxwood67
11 ай бұрын
Right tool right job. Both of these are essential in construction. The next big thing for impacts will be limiting clutches. Wait and see 👍
@ToolswithSoAlz
11 ай бұрын
I hope so
@benschnute6074
11 ай бұрын
Already kinda a thing my new impact has a setting for delicate driving it’s not a traditional clutch like a drill but it stops before it strips
@foxwood67
11 ай бұрын
@@benschnute6074 yes my my impacts have same feature. I was speaking more a mechanical clutch like installation drivers and drills. I find these super useful. But
@BigNate9411
10 ай бұрын
New milwaukee drill comes with autostop so it doesnt break your wrist👍🏼
@maxpain7197
9 ай бұрын
If it is breaking your wrist you are a complete puzzy. Try getting out and working with your hands once in awhile. My 80 year old mom can use a dang drill and not cry about her wrists. Problem with society these days.
@tommyt4062
11 ай бұрын
I use both because they're different tools for different jobs. In the past everyone used combi drills as drivers and there's a good reason why they switched to using impact drivers but that being said an impact driver can't replace a combi drill. Different tools for different jobs.
@ianbelletti6241
7 ай бұрын
I do construction. It's actually faster to have the drill set up for drilling holes and an impact set up to drive the screws. It's the bit swaps that add a lot of time to the work.
@ohioknifelover
Жыл бұрын
Wrists are meant to be happy not snappy lol
@ToolswithSoAlz
Жыл бұрын
Lol!
@rodneybrown6326
Жыл бұрын
If it’s yellow and black you’ll be takin’ it back 😂😂😂
@ToolswithSoAlz
Жыл бұрын
Ok
@Tele-strat
Жыл бұрын
9 years strong no issues but a few new batteries.
@rodneybrown6326
Жыл бұрын
@@Tele-strat I have Dewalt as well. I was just repeating a joke. When I found out the replacement battery was $100 I bought a Mikita drill motor and impact instead.
@JoseGonzalez-jd9sp
6 ай бұрын
DeWalts new stuff from the last year or so is as good or better than anything else on the market
@GTYS38
11 ай бұрын
It’s called an impact driver for a reason. It’s made for driving fasteners it’s better for driving screws pretty much nothing else tho. If u could only have one a drill is fine but if ur not just a home owner that needs a drill to use once a year u need an impact
@johntamulonis4626
2 ай бұрын
I am always confused by people use impact driver, I am with you, I did not use an impact driver for years. You make so much sense!!
@ToolswithSoAlz
2 ай бұрын
Yes sir
@cjlong2057
11 ай бұрын
I have been using my drill so much more lately instead of grabing the impact. When years ago when i got my first set i always grabbed the impact for stuff and now unless i need true heavy, speed, or mobility just gra the drill
@jaredmorris9108
10 ай бұрын
I use the clutch everytime I'm doing drywall or even a metal roof I usually use a corded drill if I'm drilling through walls or something thick but let em break there wrist or knock out there teeth o well lol great video brother
@alexnsacto
11 ай бұрын
Fence guys used a Impact driver to install our new gate. ( Hinges ) Five lag screws broke in a couple of months. They use cheap lag screws. Replaced with TimberLok 2 1/2" 64mm - tempered lag screws . Bought at Home Depot Used my cordless drill.
@shaggytube842
11 ай бұрын
Now hold on one second now both worth great. My opinion on it is Impact does give u more torque and it makes driving screws in a lot tougher yet more quality efficient Now the other one is just handy to have because it’s a purpose to like u said
@frankjdm4636
8 ай бұрын
One of the Biggest Difference is that the Impact wont Strip the Screw when driving them in as much as a Drill will but the Drill can be faster inmost instances
@mccartneystuart
10 ай бұрын
Both are good for their design. If someone is scared of using a tiny drill because it will break a wrist, they need some excercises irrelevant to the clutch.
@collin371
10 ай бұрын
It's also a lot heavier. The impact is better for fasteners but you need the drill too. Mostly in low gear.
@Wkyliving
11 ай бұрын
The impact is superior when driving screws. It's much smaller, lighter, and faster. The drill is more versatile, though. If I could only have 1 of them, I would pick the drill, but when you have both, the impact gets used more.
@MrDontcareify
11 ай бұрын
I like both tools. I think it’s important for a drill user to make sure that they use the clutch correctly or they might possibly damage the clutch and then the drill.
@ToolswithSoAlz
11 ай бұрын
Yes sir
@nordicwolf8379
10 ай бұрын
I have the small m12 drill and surge impact in a small bag that goes with my main tool bag when I go inside the building for control mounting for the machines I install. The big drill is for fabrication, the little ones do the job perfectly with no hiccups. Sure the big one is more versatile, but it doesn’t fit well in my set up so she stays at the truck until some holes need drillin
@KC_Woodworks_LLC
11 ай бұрын
It depends on what I'm doing. 99.99999% of the time, my impact is perfect on its own. When pre drilling, I use my m18 drill and a hing self centering bit and my impact. If I'm doing finish work, I'll use the drill with the clutch and my impact or another drill with a bit.
@Gadgets-N-Gear
10 ай бұрын
I agree! The Drill is more versatile, but I prefer to use an impact driver for screws and bolts, and I never drill a hole with an impact.
@emerarbuckle6872
10 ай бұрын
Yes using the clutch won’t break your wrist but the settings will be different on fastener and on material and to set the clutch will eat up the time you save by the drill doings it faster also drills are longer making it more difficult use in location and to buy a quick change bit to adds an extra part needed to quickly change between drive heads where that’s all ready built in to the impact and they even build drill bits rated for impacts with that hex 1/4 bit cause that’s what you don’t seem to grasp is by not needing to fine tune it and with the tool head being significantly smaller that help speeds up the time in between driving fasteners and no fine tuning required to avoid injury
@ROCKNROLLMODS
11 ай бұрын
I use the impact all the time, the clutch does not keep you from snapping off tek screws in 1/8" plate.
@Warrior6350
11 ай бұрын
Good drills also have kick back control, which automatically shuts of the drill, instead of braking your wrist. In germany drills are used a lot. Obviously they are much better at actually drilling. They are also better in screwing longer screws in wood. On the other band impract wrenches are really good for nuts and bolts and especially everything in the automative sector.
@Anthony-kd9fd
11 ай бұрын
Completely agree! The impact driver is now used for everything and I see more damage to installs due to using the impact driver instead of a drill
@ToolswithSoAlz
11 ай бұрын
Yes sir
@jaguardrywall7965
10 ай бұрын
Impact drivers and drills can both be used interchangeably but they are both better at certain jobs
@jacechristian8725
11 ай бұрын
I love my impact for the ease of swapping bits. Way quicker to pop the quick release and swap bits than opem and closing a chuck.
@ToolswithSoAlz
11 ай бұрын
I agree
@Whiboi
9 ай бұрын
Honestly our m18 fuel hammer drill we gotta use the clutch for drilling steel cause when it catches it don’t stop
@jake48396
11 ай бұрын
Drills are definitely they way to go for most fasteners but my 12v impact is lighter and smaller for fitting in furnaces
Пікірлер: 2,4 М.