Happy 4th of July! 🇺🇸 I had been working on a different video but that one had to be pushed back, so I quickly did this one to publish something so you don't all forget me. Now go check your belts. And then wash your hands.
@Cabry
4 жыл бұрын
Thanks! I saw the "wash your hands" reference in the cloud wheels video 😂
@versatile6714
4 жыл бұрын
Did you use the standard hardware to install the shred lights on the dual belt black carve or did you need longer hardware(bolts/screws) please and thank you
@DanielKwan
4 жыл бұрын
Standard
@versatile6714
4 жыл бұрын
Daniel Kwan much obliged. 🙌
@DUDEiTHINKIMNUDE
4 жыл бұрын
Daniel Kwan Hi Daniel! Great video, it was very helpful! Quick question for you. I just bought a backfire zealot board. I want to get 105mm cloud wheels or something similar to it to have a smoother ride on tougher roads. Do you have any affiliate links for some wheels that will work with my board? Thank you!
@fabiandörig
4 жыл бұрын
Reälly nice Intrö 🤟🏽
@tydanvotter7878
4 жыл бұрын
Lmao
@bretholtzman1524
4 жыл бұрын
LOL, it's the guy from the intro, nice board, wish you well on it !
@kimpedersen4000
4 жыл бұрын
Fabi Fabi💪🏼
@azn8ball
4 жыл бұрын
What a legend
@michaelrossi3707
4 жыл бұрын
Ayyyy
@turbo2ltr
4 жыл бұрын
Over-tight belts also put undue stress on the motor and axle bearings wearing them out quicker.
@kuba27kuba27
Жыл бұрын
I was going to mention it from a maintenance engineer point of view but you already did. Good job
@flyermike2029
4 жыл бұрын
This is a great vid, I was definitely in the “too tight” camp. Thanks.
@shanehackett7943
4 жыл бұрын
When I first made mine I pulled hard on my motor because I thought it had ti be tight
@wherebaristasgo1622
26 күн бұрын
This is great info, I got my Verreal Pro a couple of months back & I guess like many folks new to the ESK8 sport, I just assumed my belts were fine. Since watching the vid, I loosened them & found the whole board experience has changed. Slightly less whining noise, the board definitely rolls better & is far less jerky on braking as well as acceleration. Compliments on the channel, its currently one of my go-to places for broad info, even though this vid is a few years old, the info is worthy!
@DanielKwan
4 жыл бұрын
Ah I just thought of one more benefit of loosening your belt tension. The board would be easier to push if it runs out of power.
@xxxenricop
4 жыл бұрын
I was thinking about this scenario. Everyone harps on about how hard it is to push belt drive if you run out of juice. Would you not be better off spending 5 minn to takie the belts off in case you run out of power with a couple of miles. To go?
@BelviGER
4 жыл бұрын
Depending on belt length and tire diameter, you might be able to.pop them off the pulleys and then take them off even without removing the wheel On 83mm wheels that should be no issue, on 97 iirc I couldn't remove my BGT belts
@docholiday7184
3 жыл бұрын
I would have had to find out the hard way.. They really don't say these things in the instructions 😃 That's for sure
@docholiday7184
3 жыл бұрын
I don't know where this comment could help anyone but I purchased an electric skateboard from Amazon called "Fast and Furious'... Well let me tell you it should have been called!! Fast enough to work for one 12 mile trip using economy speed mode when the battery ran out it just completely stopped while I was going 20 mph... Needless to say it threw me off and flipped itself over ! Luckily my Cat like Reflexes had me up and good to go.. The motor stopped working after that
@ericpistons9387
Жыл бұрын
I cut my belts when they die so I can push
@TeslascopeMobile
4 жыл бұрын
I would be careful with the Loctite. You don’t want to use too much because it can get in places you don’t want, especially the motor. Also be sure not to use the “permanent” variety. You want the blue version that’s labeled “removable” as DK used.
@jilomemendoza1313
4 жыл бұрын
Thanks for the very practical tips. Coming from a mechanical engineering profession, most of your advice are factual and real. Keep it up!
@karenleboeuf8010
3 жыл бұрын
Daniel I’m a 56 yr old female, and I think you are excellent with your presentations. I’ve been watching all your videos for a while. Great job!
@Denkan378
7 ай бұрын
this helping me as a beginner of belt drive or even a old car with belt adjustable now i know it don't need to be more than 50/50 with a belt.
@MrJadisliu
4 жыл бұрын
Thank you Daniel. I am a beginner, now I know how to adjust my belt tension.
@TheBoardGarage
4 жыл бұрын
You're an international treasure, DK. Great stuff.
@vincentpham8605
6 ай бұрын
Very helpful. I got my e longboard 3 weeks ago. Im in love with it. This helps me lewrn proper maintenance
@markbezzy
Ай бұрын
thankyou for the advice ,got my first belt drive today and the belts were too tight and would not of known so thankyou
@Cabry
4 жыл бұрын
Awesome vid! I have some video requests for you, just some ideas: 1. Exway Flex acceleration test 2. Exway Flex Riot vs. Exway X1 Pro (Drag race)
@gearsdan
4 жыл бұрын
im so glad you're demonstrating on the Onsra belt drive. I'm waiting on my Onsra and this will definitely make it so much easier for me. Thank you OP!!
@CokefishR
8 ай бұрын
I think my Black Carve belts came shipped too tight.
@musk-eteer9898
4 ай бұрын
thank you, i get my WowGo 3E delivering tomorrow and appreciate your tutorial
@shreyashnaidu8776
Ай бұрын
Heyy, I am planning to get a 3E myself can you share your thoughts on the board so far?
@joekershner117
3 жыл бұрын
Kwan you genius, you are an angel sent from the Lord. This video is way more helpful than I can ever express. My dude! Thank you for this video!!!!!
@MrPhillipsTheChangeAgent
4 жыл бұрын
Cool I did a similar video addressing the culprits of belt drive noise and rattling and belt drive maintenance. I hate rattling noise 🤷♂️
@xxxenricop
4 жыл бұрын
Thanks for the video DK. Belt boards maintenance is definitely a great topic. How to buy belts locally without spending a bomb is also another good topic of discussion i reckon.
@philipsommerton4280
4 жыл бұрын
in the UK we have few online bearing type shops who also do pulleys and belts (for 3d printers, industiral stuff, etc) and the 5m belts are like 5 pounds from them (as not niche).
@markdransfield7555
4 ай бұрын
you are an inspiration to nerdy e-skaters all over the world
@juice9101
11 ай бұрын
Thanks so much I'm getting my first belt drive skateboard tomorrow and this helps a ton !
@chocochan3167
4 жыл бұрын
very nice and informative video, thanks. surprised nobody did this before, like small techniques holding onto a motor etc.. probably obvious for those that own a board, but I'm still waiting for my first flex to arrive.
@BrianButterz
4 жыл бұрын
hearing daniel try to explain how tight the belt should be gave me a good giggle
@asdfdfggfd
4 жыл бұрын
I figured this out on my own, but had wondered if I was doing it right. Nice to have this video as validation.
@docholiday7184
3 жыл бұрын
Thanks 👍 so much for all the help and Tips ! You have saved me from seriously messing up my brand new board.. I just Purchased The New line of "Backfire, Zealot S" Composite With newest computer . I'm waiting for it to be delivered Thursday... I'm so excited and Stoked to ride.. thanks again for your videos
@elibounromei5371
4 жыл бұрын
I have a feeling that the skate that you weren't supposed to talk about is Atlas. Thanks for this video! I never thought I can adjust belt tension until I saw this video.
@eddalde
4 жыл бұрын
7:37 LMFAO!!! Just watch the footage. 😂 Atleast you tried! Awesome video hopefully soon I could save and buy my first electric longboard! Love you videos!
@ag_a3346
4 жыл бұрын
Once again, thank you for another great video and helpful tip about having tight belts. I only recently got Exway X1 Pro Riot and noticed that the belts were tight. Thanks again Daniel.
@1msdavid1
4 жыл бұрын
Thanks a ton for this video. Evolve actually instructs you to tighten the crap out of the belts. After watching this and adjusting my belts, uhhhhh performance is soooo much better.
@Esk8Tech
4 жыл бұрын
Aye ! You had me at the intro . Nice video man.
@oscarcollinsiv
2 жыл бұрын
Im so happy with my boardnamics motor mounts with the extra tension pullies. So much easier adjusting belt tension with only 1 bolt.
@jaroslavlajta
4 жыл бұрын
Thanks for the vid Daniel 🙏🙏🙏
@gone4good
6 ай бұрын
Great video, thank you, belts sorted on my NLS3! - and sitting at an airport right now with an Exway Wave (hub drive) under my feet - flying to London, let's see how it goes. I have 2 x 99Wh batteries. The breaklight and headlights were included.
@gone4good
6 ай бұрын
Update: Flying with British Airways from Sweden to London, NO skateboards allowed (it's a BA thing staff said), so batteries in carry-on and the skate was checked in! Let's hope I see it on the luggage belt at Heathrow!
@DanielKwan
6 ай бұрын
Yeah rules vary so I put the Wave in my checked baggage for flights.
@socalscenicdriveclubtv808
4 жыл бұрын
Hi Daniel, Love the videos bratha. I know you can ride much, could you do a video on different types of bushing and settings? Nipples vs Knocks. I board almost everyday with my friends and think bushing upgrades is the secret sauce to a better ride. I’m current running orangutan Yellows(hard) on the ONSRA Black Carve Belt and Orange(soft) on my Wowgo 3 and Purple(Med)on my Wowgo 3x. I’m 6ft, 170lbs. Keep of the good work bratha.
@esk8tapas22
4 жыл бұрын
Thanks for the Info Daniel ! 👌
@ZatchProductions
4 жыл бұрын
A tip I heard from the boosted board subreddit when I was putting on new belts was to push the motor with just 1 finger and with just enough force for the belt to be in shape.
@youtubespectator669
4 жыл бұрын
I keep snapping my boosted belts and couldn't figure out why. Then I loosened it and it's been great for half a year
@mpat707
4 жыл бұрын
I love the intro hahahaha the esk8 community is so friendly and funny. Gotta love it keep it Daniel!!!
@-Sullens-
3 жыл бұрын
I have a summerboard which has two belts. This is actually very helpful
@elchevinit
2 жыл бұрын
I would have thought that was too lose still. Certainly is for a powerful board!!!
@francismcgowan5915
Жыл бұрын
What worries me the most is the prospect of the belt snapping while braking on a steep downhill.
@FilipBozon-ul6qj
Жыл бұрын
Fr
@Adanacon
3 жыл бұрын
Simple formula for belt tension: measure the Centre to centre from motor spindle to axle spindle. For every inch add 1/64 of belt deflection. 3” c-c = about 1/8” deflection
@Zx7o.
4 жыл бұрын
This is why I got a metro board X. I just have to wait like 2 more weeks for it to show up 😭😭
@ForExampleJon
3 жыл бұрын
Some of those delivery times are crazy. For me someone who lives in Canada Exway was the way to go. Took about 3 days.
@monkey_with_a_skateboard6823
4 жыл бұрын
I literally set my belts as slack as physically possible without them skipping teeth when braking hard! Get better range, less resistance when free rolling and less stress on motors!
@dgor.1266
4 жыл бұрын
What's up my dude great informative video as always with no BS, can't wait to put in my order for the Exway Wave, Exway Atlas and accessories,keep up the good work bro
@danilocecilia7831
4 жыл бұрын
thanks for the video! That was helpful to me! Could you do another video explaining a bit more about the different pulleys we can have as well as, why we need to change the bearings and proper way of doing that.
@JT-xf9sw
4 жыл бұрын
Imagine if a company made an automatic belt tensioning system! That would be awesome....wait...MetroboardX
@alexshi9320
3 жыл бұрын
I noticed it wasn’t just the belts that were tightened all the way, my wheel nuts came all the way tightened and the wheels didnt spin freely
@ManifoldSky
2 жыл бұрын
When the belt is too loose, holding the motor and turning the wheel will result in the teeth of the belt starting to ride up the teeth of the gear on the side of the gear where the belt is moving toward the gear. In a properly tensioned belt, the belt will bend up and buckle a bit on the side moving toward the gear, but will not start to ride up the teeth of the gear. Find the point where the teeth first stop riding up the gear, then tighten it down.
@ourcore
4 жыл бұрын
Good timing 'cause I keep seeing people asking how to tension belts on the Flex and Zealot. For reference, Boosted uses 3m belts
@dandickinson3629
3 жыл бұрын
Just my 2 cents - In the window of “too tight : too loose” it’s important to note that the heavier you are, the more right your belts should be. Me, I’m 220lbs of chewed bubble gum, so I need my belts a little more tight than lighter weight people. When I start from a dead stop, too much throttle will cause the belt to skip a little. However, full breaking on level 4 “NLS pro Belt” stopping is not an issue. I hope this helps! Stay strong!!!!….Stay slim!!
@austingrace6972
4 жыл бұрын
I'm saving for a electric skateboard and I'm just so exited.
@austingrace6972
4 жыл бұрын
I'm trying to get the backfire g3 plus with a carbon fiber deck and top speed of 28.5mph and range of 20-25 miles.
@vincentim54
4 жыл бұрын
And what about the vestar night fury. Very nice range and good quality..I was told. I have a bamboo gtr but the night fury was pretty sexy as well and more affordable. Check their site for spec. Have à Nice day.
@user-xy5nh3nw4o
3 жыл бұрын
For me, I tried setting the belt tension in several ways. The slack of the belt like your video, besides the paddle slipping when accelraretor and stop, when the motor spins and the belt bounces up and down, it will damage the motor shaft and bearings more than i drop a littlegiving the belt a distance of 5-8 mm to bounce up and down. it's perfect for me good accel good break do not make motor and esc stresst.
@dexterjohnsipin3431
4 жыл бұрын
great observation DK.. notice also my belt is a little tight and made some adjusments.
@hallofrecords4959
4 жыл бұрын
Hub drive, but still the more you know. Good vid.
@3L3MENT
4 жыл бұрын
Ur a really good editor and story teller, i watch ur vids that i dont even need cuz i have hub motors, my city roads destroy belts in week 😂
@anthonycampos7417
4 жыл бұрын
Daniel, I am incredibly dissapointed in this video. Years of riding my motorcycle and readjusting chain tension has taught me this trick of putting a screwdriver shaft in between the teeth on the sprocket, turn the belt/chain till it's on the other side of the the original drive gear from the motor, pull everything as tight as reasonably possible and tighten all the screws down to lock everything down in place, turn the wheel back to where the screwdriver shaft is no longer trapped between the belt/chain and the sprocket/gear and you now you have everything with an extra few mm of the screwdriver shaft as looseness. I use this same technique but with the belts on my Bajaboard but instead if a screw driver shaft I use a bit to provide the gap. You may be able to use this same technique but use 1/4" bits instead because they are smaller overall Edit also you should mention how important it is to get ALL the motors with matching tension especially when it's 2 motors and up
@DanielKwan
4 жыл бұрын
Oh damn that sounds like the obvious thing to do... Thanks for the tip, I’ll try that
@P3nguinDarknes5
4 жыл бұрын
Take a shot every time DK says 'too tight' 😁
@JDDavid
Жыл бұрын
Its a really narrow range between too tight and too loose with the Exway Wave Riot. I thought my belt was too tight on one side, loosened it a tiny bit - it still felt tighter than the other side. What happened is it started rubbing against the inside of the plastic guard over the small cog, and it shredded itself within 4 or 5 miles. :(
@jasip1000
4 жыл бұрын
For fucks sake Daniel, let’s relax with a little KZitem video. Now I had to loosen the belts, on my Ownboard Bamboo. Cheers mate 👍🏼
@DIELON91
10 ай бұрын
Great video, thanks!
@bonafideguitar
4 жыл бұрын
I just got a new board and after riding it a few times the back right bearings started to make noise fixed it the next night same thing so then I start looking at belt tension and that back right belt is obviously too tight so if you get bearing noise it might be belt to tight....Thanks Daniel for the detailed look at adjusting
@itsmeray9322
4 жыл бұрын
i have a yeeco gts board that's belt drive and this is some good help 😁
@jazzstar145
4 жыл бұрын
So many “that’s what she said” opportunities.
@slargo83
2 жыл бұрын
Yup, my belts have definitely been too tight. Explains why my motors developed some play after just a few hundred miles 🤦♂️
@dailyjumps_paul6245
2 жыл бұрын
Wish I had seen this before my belt snapped from braking suddenly when a car pulled out in front of me
@tenglin3584
4 жыл бұрын
Ordered mine Wowgo AT2, looking forward to your review. i learn that wowgo done good updates and improvement on this board, i think its gotta be an amazing board. lets ride~ 冲冲冲
@DIELON91
10 ай бұрын
Its kinda sad that i jave to say this but after reading just a few comments it looks like its needed. DONT EXPECT THINGS TO WORK EXACTLY THE SAME FOR YOUR BOARD! WHY? BECAUSE NOT EVERY SINGLE BELT DRIVE MOTOR/BOARD IS EXACTLY THE SAME. THIS VIDEO DID A GREAT JOB AT SERVING ITS PURPOSE, NOW ITS UP TO YOU TO TAKE WHAT YOU LEARNED AND SEE WHAT WORKS BEST FOR YOUR BOARD! DAMN, IT SEEMS LIKE SOME OF YOU SHOULDNT EVEN BE ALLOWED TO OPERATE A MOTORIZED BOARD. HAHAHAHA SMH😂😂😂
@itsmorty788
2 жыл бұрын
Yeah, just watch the footage. I died😂😂😂
@olivermurphy97
4 жыл бұрын
Your videos are brilliant Daniel, but on boosted boards you pretty much need A LOT of tension on the belts. When riding my V1+ or Steath, when very aggressively riding downhill (45-50kph), before slowing down at the bottom. Every damn time belts will slip, even with new belts, also the Stealth was slipping even with 20km on the odometer (pulleys were definitely not damaged). Anyways just my experiences with boosted!
@DanielKwan
4 жыл бұрын
I actually only know of two brands that use 3M belts instead of 5M, and Boosted is one of them. So yes on a Boosted Board you'd need to have the belts be tighter. (Smaller teeth.)
@JT-xf9sw
4 жыл бұрын
@@DanielKwan great content...love your videos. Which one is better 3M or 5M?
@Water2Spicy
4 жыл бұрын
Would love to see your thoughts on the shark wheel board
@wheelsistripping5641
3 жыл бұрын
Awesome vid great advice . I wouldn’t say loctite that’s a brand they should be paying you if you gonna say their name that much, a generic term is thread locker until they sponsor you 🤙🏾
@cltucker916
4 жыл бұрын
Can I loosen my belts without the loctite? It’s in the mail but I’ve yet to receive it. Thanks for all the fantastic videos!!
@drew4711
2 жыл бұрын
The locktite is to make your tensioning permanent. It’s probably not needed but ensures the screws will never fall out.
@geoffreyyuan787
4 жыл бұрын
nice grinding sound "kakakakaka"
@muditbhanot2271
4 жыл бұрын
Someone tell me why this guy is not famous yet?
@phoenixx6269
Жыл бұрын
Hey, I'm looking to get my first electric longboard would you recommend belt or hub motors?
@fiachrabrowne8299
4 жыл бұрын
Great video Daniel!
@sirvival5461
3 жыл бұрын
Nice Video bro 🛹 U can also use this video for a drinking game. Every time he says "loose" or "tight" 😅 u have to drink. I have a Meepo hub Driven board atm and i am looking forward to a wowgo at2🥳
@spliffdelakong5422
4 жыл бұрын
Perfect timing... ish. Got Evolve 7" AT's coming Monday! Unfortunately my OB Bamboo just went crazy. Help?
@jasip1000
4 жыл бұрын
What’s up with it?
@darkside907
4 жыл бұрын
OB went crazy. sounds pretty specific. lol email evolve dude they will help you
@spliffdelakong5422
4 жыл бұрын
@@jasip1000 poppa... we reddit. It died. Full story where we met. OB support is so far, all about fixing the issue. Edit: FED EX JUST CALLED SAYING MY PACKAGE (7" pnumies) WILL BE HERE WITHIN THE HOUR! I've never been so happy but unhappy.
@spliffdelakong5422
4 жыл бұрын
@@darkside907 Evolve boards seem great but I don't feel I'd like the controls and the maybe it's my fault, maybe the board's thing. After (forgive me for not remembering his name's) video... i understand... kinda. If I wanted to spend that kinda money right now I'd be a very little more willing to. But then I'd rather save for a really high end if I got that far. No judgments. My fuckin 7" just arrived at my door. So sad.
@jasip1000
4 жыл бұрын
spliff de la kong ahh its you mate, I didn’t notice the similar Reddit name.
@rosevillemtbdad302
2 жыл бұрын
Your content is very helpful. Overall I've had a rather poor experience w/ e-skate thus far. Minor issues w/ Meepo Hurricane, major issues w/ Ownboard Bamboo AT Pro - in both cases, obtaining after-sale support has been incredibly frustrating, inefficient, and unsatisfactory. I'll leave it there. I think belt tension (far too loose as installed/delivered) contributed to the issue w/ Bamboo AT Pro. This video helped with that. (NB - I figured that out on my own, Ownboard didn't diagnose it despite massive back-and-forth emails w/ descriptions, videos, etc.). Overall I just don't know if this industry is ready for prime time - equipment like this needs to be robust, reliable, and SAFE. Warranty, service, and after-sale support are hugely important. I just don't see it w/ e-skate - poor QC, huge communication barriers, etc. Too bad - it's awesome fun when they work as intended! Thanks again for the educational content - without creators like you, almost impossible to educate one's self on the technical and operational factors of e-skate. THANK YOU.
@mariolenta2178
2 жыл бұрын
Yeah also having poor time with exway. Awesome board, but came with a lot of flaws and they don't accept them
@Baptross
6 ай бұрын
Hi Daniel, I have a question about AT boards, should the belt tension also be reduced if it'd been as tensed as shown on the video? Many thanks, love your channel
@DanielKwan
6 ай бұрын
Not sure which part you’re referring to but in general you’d want belts on bigger gear ratios to be a bit tighter compared to smaller gear ratios because fewer teeth are in contact on the drive gear. Boards are also much more powerful now than when this video was made, so I’d go a little tighter than shown. You should still go by trial and error and see how loose you can get without the belt slipping.
@Baptross
6 ай бұрын
@@DanielKwan I appreciate so much how quick and detailed you answer is. I was indeed refering to the fact that gears are bigger when using 150 mm wheels.
@B.Fenderer
12 күн бұрын
I've loosened the belts on my Wowgo AT2 plus with 175 mm tires, and it feels much better, quieter, smoother, less clunky, so I'd say it's worth testing as I think many esk8s, even ATs have belts that are too tight from the factory. In any case, mine is much more pleasant to ride now :) thanks for this video 👍
@TommyDrone
3 жыл бұрын
Great video and very helpful.
@bboylorettoEight08
3 жыл бұрын
Oh great tips I had my board for 2 years never even thought about that cause my braking is super hard and jerks really sudden. I don’t know if you’ve rode the riptide board R1 but yea acceleration is shotty too, thanks for this
@wdoering01
4 жыл бұрын
Hello Daniel, big fan of the channel. Have you done, or know, any good video on giving maintenance to hub motors? I have a backfire G2T and would like to learn more about how to make the motors last as much as possible. Thanks!!
@Coptah
4 жыл бұрын
Got the ownboard with evolve kit and those pulleys are so large its one of the hardest tension adjustments I've seen, pulley and axle are so close together
@jay-ru-me
4 жыл бұрын
Same thought here... also, wonder I if Evolve is noticing they are selling more AT kits than boards... lol.
@the.wayne.b
3 ай бұрын
people always comment how my belts are too loose, only time being too loose isn't an advantage is breaking at speed downhill. but why would i be doing that lol. always felt i got better performance when they were too loose.
@ajaxsf
4 жыл бұрын
I thought I clicked on Fab's video by mistake
@unlimitedpower8113
4 жыл бұрын
Got a boosted plus close to a week before they went out of business. Battery max charges to 70% after 75miles. Big bummer.
@rustler08
3 жыл бұрын
So, what tools did you use to diagnose the tightness? What is the proper deflection of a belt when pressed? Do you even know how to check a belt? All rhetorical questions, because I can see that you don't actually know.
@evanwalach4007
2 жыл бұрын
Why is my belt moving different directions depending on if I go forward or backwards?
@darkside907
4 жыл бұрын
Check your gears too, i had a small cracked gear in my evolve and it was ripping every belt i put on ,my GTR
@drew4711
2 жыл бұрын
Why is he applying locktite? What if you decide you want to adjust it again?
@vincentim54
4 жыл бұрын
Vert High quality tutorial. Thanks about the belt tips
@Luchek_chesnochek
3 жыл бұрын
Me watching this wanting a hub motor board: 🧿👄🧿
@Kim-en9gp
4 жыл бұрын
If ur belt snaps does it mean i cant break? The last thing i want is going downhill and having snap and crashing into death
@DanielKwan
4 жыл бұрын
If both of your belts snap then yes you would have to brake some other way or bail. If just one belt snaps then it would feel like your brakes got a lot weaker. Unlikely for both belts to snap at the same time though; never happened to me.
@seanc6054
4 жыл бұрын
Waiting for the wave!
@tydanvotter7878
4 жыл бұрын
1:45 uhhhhhhh.... Had me dead 😂
@TheRealDucko
4 жыл бұрын
Is it ok if the belts aren't exactly equal in tension? When I did this on the Exway Flex It was hard to adjust the belt tension equally to both sides.
@DanielKwan
4 жыл бұрын
GibbyBruhh Yes it’s ok if they’re not exactly equal in tension
@abdielnavarro8077
2 жыл бұрын
My belt drive smells like burning rubber after I changed the all terrain wheels into the street wheels. How do I fix this?
Пікірлер: 326