Get your Doubt Me merch at www.DoubtMe.com/Apparel Follow The Hyphenate on instagram: @TheHyphenate
@DoubtMeTech
3 жыл бұрын
@Aries Danny Happy to help. Thanks for watching.
@arhon888
2 жыл бұрын
Have the Nano with the bundled cables, but the Canon cabel supplied does not work with my Canon 90d:-( is it possible to purchase one seperately?
@arielestulin9706
3 жыл бұрын
Just got my slider but can't figure this out. Is it possible to shoot an astrophotography timelapse? 20 second exposure, 1 second interval and so forth. Everything I've tried the slider moves during the shot?
@DoubtMeTech
3 жыл бұрын
My slider is currently being replaced because it got a bug after a firmware update, so I don't currently have one handy to help you out, but the only thing I can think of is to change your interval to 25 seconds and see if that does the trick. I know I've had other timelapse equipment throughout the years that the interval had to be set to include the time of the exposure, which shouldn't be the case, but it would happen. If that doesn't work, maybe a firmware update. I know I said mine got a bug when I did an update, but when speaking to the iFootage team, they told me I was only the 2nd person to have that issue when updating a shark slider nano, so it hasn't been the case for others and should not be the case for you
@tobiasjones7242
Жыл бұрын
i can't seem to get the slider to trigger my a7riiia with the s2 cable. anyone know what setting i need to adjust? usb single or multi? i know how a timelapse works, and i can set one up with the camera alone, i just can't seem to get the shark nano to trigger shots
@龍在江湖-i4s
2 жыл бұрын
Hi Doubt, I had a tragic experience yesterday )Sunday) using Nano Slider. I set up the slider and connected it with my Sony A7r4 and triggered the START button to take phones, and it took me 1 hour to finish, however when I got home and found nothing was recorded on the card. Could you please give me a hind what the hell was wrong to have not succeeded in shooting the timelaspe? Many thanks Randy
@fredriksvard2603
Жыл бұрын
I just gave up on timelapses with the nano, it's too buggy for real world use. As a video slider it seems to work ok, for interviews etc.
@독도사진작가신현철
3 жыл бұрын
20초 노출, 1초 간격 등. 내가 시도한 모든 슬라이더는 촬영 중에 움직였습니까?
@TheMouliBasu
Жыл бұрын
What menus settings are needed on the A7s3 for timelapses? My camera isn't getting triggered by the S2 cable.
@DoubtMeTech
Жыл бұрын
Make sure you're in photo mode
@TheMouliBasu
Жыл бұрын
@@DoubtMeTech I am. I switched on the USB remote mode too, but the message displayed on teh A7s3 is that the USB cable isn't recognised. Could it be that the cable is malfunctioning?
@DoubtMeTech
Жыл бұрын
@@TheMouliBasu maybe you are using the wrong cable?
@TheMouliBasu
Жыл бұрын
No. The cable is S2. That's the one I used one time after I got the slider. Then it stopped working. Which is why I thought that some setting has changed in the camera. PC Remote or USB settings perhaps.
@DoubtMeTech
Жыл бұрын
@@TheMouliBasu hmm. i'm not really sure. Maybe the cable went bad
@donvitui77
Жыл бұрын
What is buffer?
@salvamando1
2 жыл бұрын
Great instructional video, thank you! I'm late to the party and I receive mine tomorrow - I regret not getting it when they first came out, they are about $200 more with "inflation" now! *wallet crying*. Nice shot of Pershing Square in DTLA btw, I use to work around there eons ago and I actually saw Pershing Square being made! Yes, I just aged myself lol CHeers!
@SeoulLoRonnie
3 жыл бұрын
should I use S & Q mode inside the camera A7SIII and set a normal point A and point B ? It's look more simple than this method.
@DoubtMeTech
3 жыл бұрын
Don't use S & Q. For a proper timelapse, it's best to do as I showed and take photos, then turn that into a video file. Watch this video if you don't know how to edit a timelapse: kzitem.info/news/bejne/2nyA1oeCpZSGiWk
@SeoulLoRonnie
3 жыл бұрын
@@DoubtMeTech Thank you for your reply.🙂
@DoubtMeTech
3 жыл бұрын
Happy to help. Thanks for watching. 🙏🙏
@pep98
3 жыл бұрын
Hi, i got mine today. Was really happy, for about 30 minutes. I have an Olympus M1-Mark III and altough they said in the shop that would work, with cable T2, it doesnt. Whatever i tried, timelaps, video, soon when i connect the camera to the slider my camera stops working. It takes no picture's and no video. Do you have any idear what could be wrong?
@joyoffilming9500
3 жыл бұрын
Cool and easy to follow instruction - and, great footage!
@DoubtMeTech
3 жыл бұрын
Happy to help. Thanks for watching and for the good vibes. 🙏🙏
@mehdimediavideo
3 жыл бұрын
nice review but unfortunately the delivery time is much too long, not cool !
@DoubtMeTech
3 жыл бұрын
Yeah the demand is high for this product. Hopefully they get more of them produced soon
@colin_rootz
3 жыл бұрын
@@DoubtMeTech They should start deliveries again in May 2021. Thanks for these videos!
Пікірлер: 29