캔스프레이를 이용한 관통부식을 수리해서 외형복원을 완성하는 동영상입니다.
This is a video that uses a can spray to repair through corrosion and complete the restoration of the outer shape.
샌드페이퍼의 사용법을 아시면 굉장히 쉽게 작업 가능합니다.
If you know how to use sandpaper, you can work very easily.
작업법
1. 80grit (80방) 으로 부식된 곳을 깨끗히 다 닦아줍니다.
2. 뼈대의 역할을 하는 철망(방충망 같이 촘촘한것)을 부식에 의해 관통된 곳에 집어 넣습니다.
3. 1차 모양을 만들기 위해 frp 퍼티 또는 알루미늄 퍼티로 철망에 대충 붙여줍니다.
3-1. 이후 80grit (80방)을 이용해 모양을 잡아줍니다.
4. 1차 작업에서 약간 부족한 모양은 2차 퍼티(폴리퍼티)로 마무리합니다.
4-1 2차 작업 후 구멍들을 메우면서 180~320grit(방)으로 샌딩을하면서 모양을 잡아갑니다.
5. 프라이머 뿌리기
5-1 뿌려진 프라이머를 400~800grit(방)으로 샌딩을 치면서 면을 곱게 다져 나갑니다.
6 베이스 뿌리기
7. 클리어 뿌리기
프라이머부터는 시중에 판매하는 캔 스프레이를 이용하시면 됩니다.
스프레이 사용시 주의점
프라이머의 과도한 스프레이는 샌딩 처리로 가능합니다.
본격적인 색이 올라가는 베이스는 샌딩처리로는 힘드니 베이스를 뿌릴 때는 조금식 자주 뿌려 주세요
클리어도 막 뿌려도 상관없습니다.(샌딩 처리로 광택 가능합니다.)
클리어의 흐름의 처리법은 차후에 영상으로 만들겠습니다.
the working method
1. Clean the corroded area with 80 grits .
2. Insert a wire mesh (such as a screen) that serves as a frame into the area where it is penetrated by corrosion.
3. Apply frp putty or aluminum putty to the wire mesh to make the primary shape.
3-1. After that, use 80grits to shape it.
4. If the shape is slightly lacking in the primary work, finish with the secondary putty (poly putty).
4-1 After the second operation, sand 180 to 320 grits while filling the holes.
5. Spray primer
Sand the 5-1 sprayed primer with 400-800 grit and finely grind the noodles.
6. Spray the base.
7. Spraying Clear
From the primer, you can use the commercially available can spray.
Precautions for Spray Use
Excessive spraying of primer is possible by sanding.
It's hard to use sanding for base makeup, so spray it more often.
It doesn't matter if it's cleared or sprayed. (It can be polished with sanding.)
The processing of the flow of clear will be made into a video next time.
Негізгі бет Автокөліктер мен көлік құралдары 이게 이렇게 쉽게 가능하다고??
Пікірлер