Want to get absolutely sauced? Take a shot every time he says umm. 😂
@franciscotorres1261
10 ай бұрын
I have the same kit on my f150 How do i adjust the rear shocks? The ride is very bumpy. I want to make it smooth
@ivanynana
9 ай бұрын
we just installed a kit and i have the same question, mine is the same
@NXCoyoteF150
9 ай бұрын
adjust the compression and rebound on your shocks. It is lowered so it will be a stiffer ride no matter what kit you use.
@mycobrahatesyou
2 жыл бұрын
Does it work with stock exhaust? I have a 2020 roush nitemare with stock exhaust and the roush axleback behind the right back tire
@NXCoyoteF150
9 ай бұрын
What year f150 because on my performance 3/5 kit for my 2018 it has add a leaf springs and my truck stock has a 3 pack leaf spring, 2 clamped together and a single. Your truck only has 2 leaf springs so why the difference on yours. Stock springs are 3 or 4 springs not just 2 like what this truck is showing.
@beewaxyt5615
2 жыл бұрын
Where can we buy that exact setup?
@junioro907
Жыл бұрын
Do the brake lines need to be re run to be able to mount the shock relocation mounts
@michaelfishkin4332
Жыл бұрын
Nice
@Yeahuhayn
2 жыл бұрын
Your u bolts look different from mine
@alexmarin3995
Жыл бұрын
Would this work on my 2023 f150 XL 4x4 RCSB
@zekebrothers3129
Жыл бұрын
Glad they show everything in detail 😂 they can’t even send you the right kit that fits your truck Yep 1900 bucks later and I have extra parts and a crappy fit at best on most parts instructions right 🤔 might as well watch a KZitem video oh wait you only see the finished product well dig a little deeper and Wow 🤩 the issues people are having with their kits 🤔makes you wonder if Victor , and the rest of IHC suspensions watch or look at other issues we have with there kits 👎🏻
@MrBoom50
Жыл бұрын
I got cancer reading this.... but I've installed 12 kits this year and all had necessary parts.
@xxdemonshitxx
Жыл бұрын
@@MrBoom50 You're a fanboy and a douche. You need to learn to deal with criticism by being objective, not by being toxic. We don't need garbage like you in the community.
@xxdemonshitxx
Жыл бұрын
I had to replace most of the hardware for the traction bar portion. The bolt that the bump stop bracket pivots on is too short and you have one of the pivot points sitting on threads. Had to move from a 3½" to a 4". The bolts that hold the front leaf pack clamping brackets together were too long so that before you get to 65 ft lbs torque and long after the brackets flex around the one and a half leaf springs, the inner lock nuts bottom out on the shoulders of the bolts so they just spin unable to reach torque spec.😑 Oh, and that leaf bolt lock clamp at 2:48 is installed wrong IAW the instructions...wtf.
@texastoughcarports2115
9 ай бұрын
No vídeos bro, u should atleast do a review or some shi! Instead of blasting people
@robbiedarby2312
3 жыл бұрын
Where is this shop located
@MrBoom50
3 жыл бұрын
mcallen tx, ihc suspension
@rafaelpena5512
Жыл бұрын
Where I can get a kit
@d.collier_8280
3 жыл бұрын
Are the coil over/shock brackets movable? Like can you slide them closer to the leafs or do they have to go there close to the center section?
@MrBoom50
3 жыл бұрын
There's some movement in them yes
@gregorygardner1719
3 жыл бұрын
@@MrBoom50 I just purchased a truck like yours and I need to color match the chrome bumpers. It’s my understanding you can’t paint chrome properly. How did you proceed with your color match? I ordered this lowering kit so I’m super thankful for this video. I didn’t want to make a 2020 Belltech kit work. I wanted to do this correctly the first time. I do worry a bit about the rear struts being so close together though. I hope the truck doesn’t sway in corners! Please text me as I have a couple more questions please. Headlights and such Lee 217-246-0787
@MrBoom50
3 жыл бұрын
@@gregorygardner1719 no chrome on the truck, but we prep chrome the same as everything else amd use a good acid etching primer.
@haphazardOG
Жыл бұрын
Does anyone know the part number to thos dual adjustable qa1’s?
@haphazardOG
Жыл бұрын
😢
@juan684938
11 ай бұрын
I messaged them on Facebook and they said it was the td709! Which is for a GMC/Chevy
@haphazardOG
11 ай бұрын
@@juan684938 thanks!
@GR018
3 жыл бұрын
Is that a drag racing kit or road course kit?
@MrBoom50
3 жыл бұрын
set up for drag racing, minus the trac bars, it will do well cornering though because it is on coilovers
Пікірлер: 34