Let me add my two cents to it... this is a very strong second order LPF due to huge capacitors. If you calculate the pole frequencies you will get very small values, both less than 1 Hz (by putting s=jw in the T/F). The input is a periodic square wave with a fundamental frequency of 1000 Hz ie the first sinusoidal component in its Fourier series expansion will be of 1000 Hz frequency. The average value of the periodic square wave over one time period which corresponds to its dc content turns out to be 2.5 volts. Since the poles will start the rolling-off of the magnitude at frequencies as small as 1Hz, this attenuation will become huge at frequency even of the first fundamental (1000Hz). This is the reason why the voltage across capacitors is almost equal to dc content of the input. In frequency domain it's much easier to figure things out.
@analogeasy-peasy7559
3 жыл бұрын
This is the right way to feel about the circuit.
@Shivshankar-c9f
3 ай бұрын
Please keep on posting videos like this there are students like us to support from whole heart
@trinetra-teaches
3 жыл бұрын
Thanks a lot for detailed discussion. This is very helpful for analog interviews. Finding analog interview questions is very tough. Keep posting more. A good initiative.
@analogeasy-peasy7559
3 жыл бұрын
Thanks for the appreciation, was quite busy lately. But surely will be continuing the same.
@HardwareNinja
3 жыл бұрын
Hi, check us out for engineering interview related questions. We'd love to hear your feedback! kzitem.info/rock/7h3PROcX7Zgx00alQokJ-w
@SAhellenLily
5 ай бұрын
Analog interview questions is very tough
@bhavikparekh2044
7 ай бұрын
Its basically PWM modulation on a second order LPF, if the duty cycle is 50% then answer is half of vdd which is 2.5. If you change the duty cycle, then output will change accordingly
@Shivshankar-c9f
3 ай бұрын
Please keep on posting videos like this there are students like us to support from whole heart❤
@SakshamAggarwal-kd8xj
2 ай бұрын
Sir you assumed that 10F capacitor charges very less, which is true. But when analysing 1F capacitor, we have to short circuit 10F capacitor. But in the vedio you have open circuited it.
@fantastic1046
2 жыл бұрын
I knew this concept, but you really make me understand it so better
@Lol-dt1mw
3 жыл бұрын
Thank you bro for such wonderful video. I saw your videos and understood new concepts. On that basis I'm able to join Texas instruments for internship as an analog intern. Thank you once again...keep uploading...keep rocking !!
@analogeasy-peasy7559
3 жыл бұрын
Wow that sounds so beautiful ❤️. Texas Instruments intern, A very bright future is waiting ahead for you. Congratulations 🥳
@Lol-dt1mw
3 жыл бұрын
@@analogeasy-peasy7559 request for you...Will you suggest me some necessary stuffs or topics or some softwares which might be useful for an analog engineer; so that I can prepare for it and work better during my internship...Any suggestion based on your experience...!? It will be great help for me 🙏
@analogeasy-peasy7559
3 жыл бұрын
Start going through basic analog lectures of Nagendra Krishnapura, that's enough
@pranjalbaishya1878
2 жыл бұрын
Nice video. Sir I am not able to understand how the waveform is converging to 2.5 volts. I tried to derive from the equation but not getting the result.
@rohanlal3695
Жыл бұрын
The Vx comes out a series of exponential considering charging minus discharging, I tried out to sum till n tendon ding towards infinity .
@mohdkhairizulkalnain279
Жыл бұрын
Hi there thanks for the videos! Keep em coming! Just out of curiosity, may I know why the discharge and charging time constants are not equal initially?
@mandlikprajwal466
Жыл бұрын
Why you said 2.5 volt Won't there be some voltage drop in resistor itself. Your kvl will fail if this happens
@analogeasy-peasy7559
3 жыл бұрын
One Point Actually - we can always get the time constant of the whole circuit by calculating the Transfer Function of the circuit.
@waferlayout
8 ай бұрын
Why not add two switches,one is above capacitor 1f and the other is above 10f capacitor??😊 Time is t1 and t2😊 First t1 closed and then or First t2 closed and then ....
@VipinKumar-re2cn
3 жыл бұрын
It is really unique in youtube.
@analogeasy-peasy7559
3 жыл бұрын
Shukriya Bhai
@ajaychauhan-tf4ce
3 жыл бұрын
Bhai to Gazab hi kr diya..
@shashankmourya4366
3 жыл бұрын
Thats one good explanation 👍
@HardwareNinja
3 жыл бұрын
Hi Vipin, check us out for engineering interview related questions. We'd love to hear your feedback! kzitem.info/rock/7h3PROcX7Zgx00alQokJ-w
@akashwayal8797
3 жыл бұрын
why 1f capacitor is charging up to 2.5v if supply is 5v?
@analogeasy-peasy7559
3 жыл бұрын
Because the input wave is on for a period T/2. It had been charged to 5v had the input voltage be a unit step in nature.
@naveenchoudhary2675
2 жыл бұрын
Guys please donot Stop..!!! can I request you guys make videos on various commonly used circuit such as buck-boost, charge pump etc.
@analogeasy-peasy7559
2 жыл бұрын
Hii Naveen, actually we guys have shifted to Bangalore like on 4 th April. We are trying to find a good flat and settle in hear. There are many new challenges to handle in the new city but surely we need to get some time and get back to what we love the most. ^_^
@naveenchoudhary2675
2 жыл бұрын
I also live in Blr, 😀 traffic boht hogya.. company k pass lena ghr
@GregoriousApartment
2 жыл бұрын
@@analogeasy-peasy7559 where do you guys work?
@ebadurrahmankhan4397
Жыл бұрын
what if the second branch is taken as first and the first one as the second? what will happen that? can you give an analysis?
@abhisheksamboddu6580
2 жыл бұрын
oh no ...i was asked the exact same question for Summer intern at TI..wish i would have seen this before:"...anyways bhiyya are u from mtech or btech?
@poiuyt52
2 жыл бұрын
Can We can solve this by nodal or mesh analysis..????
@pallavisingh9973
3 жыл бұрын
Please.. continue these types of questions.it's my humble request
@analogeasy-peasy7559
3 жыл бұрын
Sure. After seeing such a huge request from you all guys. We feel really motivated to start it again. :)
@HardwareNinja
3 жыл бұрын
Hi Pallavi, check us out for engineering interview related questions. We'd love to hear your feedback! kzitem.info/rock/7h3PROcX7Zgx00alQokJ-w
@आदर्शतिवारी2021_6
4 ай бұрын
For what purpose this interview was ?
@alansaldanha1698
2 жыл бұрын
What happens if the input is 5V dc input? Will there be any change? Good analysis by the way.
@getusel
5 ай бұрын
In that case the output settles at 5V
@vamsisyoutube928
3 жыл бұрын
Brother every one are telling RC Circuit is very important concept . Could you tell any sources for preparation of RC circuit so that we can answer in written test and interview
@analogeasy-peasy7559
3 жыл бұрын
Nagendra Krishnapura lectures are freely available on KZitem you can refer that. Also go through all the GATE EE and EC questions bank for Networks at least. Else Transient and Frequency response is what the interview goes around. :)
@HardwareNinja
3 жыл бұрын
Hi Vamsi, check us out for engineering interview related questions. We'd love to hear your feedback! kzitem.info/rock/7h3PROcX7Zgx00alQokJ-w
@thesailaja5941
Жыл бұрын
Everything is great guys why can't you start teaching❤
@hardikjain-brb
7 ай бұрын
gr888
@Ankitsingh-my1vu
2 жыл бұрын
Very confusing explanation
@analogeasy-peasy7559
Жыл бұрын
Yep no doubt it is not easy to follow but don't lose hope keep trying.
@nidhigupta4461
Жыл бұрын
@@analogeasy-peasy7559 why it is reaching only at 2.5V ..can you make it more clear?
@balajin2472
Жыл бұрын
@@nidhigupta4461i believe that 1khz square wave input is of 50% duty cycle. The RC network acts like a low pass filter and averages out the 50% duty square wave to approximately 2.5V (50% of 5V)
@Shivshankar-c9f
3 ай бұрын
Please keep on posting videos like this there are students like us to support from whole heart
@Shivshankar-c9f
3 ай бұрын
Please keep on posting videos like this there are students like us to support from whole heart
@Shivshankar-c9f
3 ай бұрын
Please keep on posting videos like this there are students like us to support from whole heart
Пікірлер: 53