will this go with the canon 6d? i have the rokinon cine 85mm & 35mm with the body
@aninstrumentalvision
7 жыл бұрын
I wish there were some reverse shots of the instructor. i.e from his POV. I sometimes get confused when viewing him as to which is left and right, as his left is my right. Also the fact that he is left handed and I am right handed only adds to some confusion. Otherwise the demo is excellent, but if we could see his POV it would have helped a lot, IMHO. This would have been easy to do as all you need was another video camera behind him and off to his right or left. My head hurts!
@danieldjguitar
3 жыл бұрын
Hello, I have "IKAN BEHOLDER EC1", I haven't used it for a year because it vibrated a lot and got out of control despite being well calibrated, do you know what I can do? or already discard it?
@JetspotNetworks
7 жыл бұрын
Does this properly balance Sony A7SII + Sony 24-70mm f2.8 G Lens ?
@PavolKasalaProductions
8 жыл бұрын
Just ordered mine today
@JetspotNetworks
7 жыл бұрын
How is it working ? How much time did it take to balance ?
@PavolKasalaProductions
7 жыл бұрын
Five minutes first time. Now 10sec.
@JetspotNetworks
7 жыл бұрын
Wow awesome.. Which body and lens ?
@PavolKasalaProductions
7 жыл бұрын
Canon 5D mm IV and 24mm f2.8 IS
@PavolKasalaProductions
7 жыл бұрын
Also 24-70mm f2.8
@JJGVIDEO2011
7 жыл бұрын
Hi! I've read or heard from a couple of pages that the battery life is 20hrs? I am assuming to trust the ikan website of 2-3 hours? Also, is there an app for controlling the gimbal? Thanks!
@IkanInternational
7 жыл бұрын
Thanks for pointing that out. The EC1 can last up to 20 hours under certain conditions. 2-3 hours applies to the DS1. I will update that on our website. Our mistake! And, unfortunately we don't have an app to control the gimbal.
@Alexfernando2255
7 жыл бұрын
hey my brand new ec1 roll the left litlebit when i start it. i balanced it properly. when i power on its roll to left litilebit. level is not horizontel. how to fix it.
@IkanInternational
7 жыл бұрын
It's possible that the balancing is not completely correct. If you're still experiencing issues, please contact our support team. You can contact them by emailing support@ikancorp.com
@erdond
7 жыл бұрын
i have same problem, the horizon is tilt about 5 degree or less. Have you fix this issue ?
@IkanInternational
7 жыл бұрын
I'm not sure what the problem could be. If you find your gimbal to be defective, please contact support@ikancorp.com - we'd be happy to help. :)
@nassufmmadi4648
7 жыл бұрын
Same problem.. It made me miss important shooting on my 2 last weddings..
@IkanInternational
7 жыл бұрын
I do apologize for any inconvenience. If you have an Ikan gimbal (usually indicated with yellow knobs and the back motor has Ikan's logo on it) you can contact support@ikancorp.com - If you don't have an Ikan gimbal, you will need to contact Team Rebel Design for product support. Thanks for reaching out to us.
@GreysonWeddingVideos
8 жыл бұрын
Quick question, I just got the EC-1 and am having trouble balancing it with my Panasonic GH4 and SLR Magic 10mm ultraprime lens. It's a heavy lens compared to the Panasonic lenses I have, and is definitely front-heavy when mounted on the gimbal (the lens seems to weigh more than the camera body). Any recommendations on how to compensate for this? Also, would there be any value to adding a counter weight of some sort to the body of the GH4?
@IkanInternational
8 жыл бұрын
It's possible that by adding weight to the back of the camera somehow, you could compensate for this, but the main issue is the weight distribution. Sure, it has a weight limit, but the important part to think about is the center of gravity. If the center of gravity is not properly adjusted for, then your solution would have to be to get a lighter lens. I'm assuming you can't move the camera back far enough to get the central weight off of the front, yes? You can try adding a riser plate that might add more weight, but then you would still have to compensate for the weight once again. The simplest solution is a lighter lens.
@tvtrippy1234
7 жыл бұрын
Hi Just a question, I think my gimbal is not morking properly, its seems balance but when i turn it on it shakes uncontrollably, whats going on ?
@IkanInternational
7 жыл бұрын
Hi there. If you're encountering issues with your gimbal, please contact support@ikancorp.com - the support team will be happy to help you out!
@lukehero
7 жыл бұрын
Will a Sony RX100 be too light for this? I'm looking for a good stabilizer for it.
@IkanInternational
7 жыл бұрын
Yes, it will be too light. Keep a lookout for a lighter camera option :)
@ryanmatthewrusso4538
8 жыл бұрын
Does the DS1 have an area where I can attach a monitor as well?
@IkanInternational
8 жыл бұрын
Hey there! The DS1 and the EC1 both have a mounting point at the bottom of the gimbal for accessory attachments. The EC1 also has two MORE mounting points in the side of the handle. Check out the mounting points and other features here>> DS1: bit.ly/2aoeAuD --- EC1: bit.ly/2cTPDwm
@ArteagaProductions
8 жыл бұрын
whats a good light small and HD monitor for a dslr to mount on the EC1
@IkanInternational
8 жыл бұрын
We have a 3.5 in. monitor available. It's the VL35: bit.ly/2aM7Zh8 We also have the DH5e - a 5 in. monitor: bit.ly/2a52UlD
@UNOCASTILLO
7 жыл бұрын
i read in the manual this • Bluetooth module for remote control (not included) • 2.4g wireless joystick module for remote control (notincluded) where i can find those?
@IkanInternational
7 жыл бұрын
We're working on getting a joystick remote sometime soon. We showed the gimbals with the remote in Las Vegas at the NAB Show and it got a positive response. Keep an eye out - we're hoping this item is available soon. :)
@YoungBlaze
7 жыл бұрын
Ikan International im confused on when you push the joystick button in, it does something wierd like auto pans
@IkanInternational
7 жыл бұрын
The joystick is supposed to be directional in that if you press it to the left, it should pan left. When you say "auto pan" does it keep panning even after you've let go of the joystick? I've never heard of that happening. Please contact our awesome support team via email support@ikancorp.com - they'll be able to answer some more questions and help you out!
@ThuNguyen-lv7mk
7 жыл бұрын
Hi , Would this support a canon g7x, 6D and 7D? Thank you
@IkanInternational
7 жыл бұрын
The EC1 should support the 6D and 7D but the G7 X might be too light. I'd wait for the MS-PRO gimbal for that G7 X.
@IkanInternational
7 жыл бұрын
The MS-PRO has recently been released! Check out the MS-PRO here: bit.ly/2k3ODZ8
@q50fromcincy24
7 жыл бұрын
My brand new (purchased yesterday) EC-1 (perfectly balanced), Spins at violently high speeds on the Pitch axis. my $900 tool, has turned into a carnival ride for my camera. I have emailed support. But it has been over 12 hours with no response. Please Help!
@IkanInternational
7 жыл бұрын
Hello. Oh no, I'm so sorry to hear about this inconvenience. I have emailed the support team and will try to get to the bottom of this. Please make sure you emailed support@ikancorp.com - they will need proof of purchase before proceeding with support for your gimbal. We will get this all figured out for you. Thanks for contacting us.
@DEADWILL
6 жыл бұрын
I have the same issue :( did you find a solution ?
@DEADWILL
6 жыл бұрын
I have the same issue... is it possible to reboot the Gimbal as the factory parameters ?
Пікірлер: 41